Bs11 config » History » Revision 5
Revision 4 (laforge, 02/19/2016 10:48 PM) → Revision 5/12 (laforge, 02/19/2016 10:48 PM)
bs11_config is a small commandline program that can be used to configure the [wiki:BS-11] BTS using its RS232 link. It can perform a subset of the functions that are typically performed using the Siemens LMT (Local Maintenance Terminal) software, such as * querying some essential configuration values * creating and deleting TRX1 objects * download of SAFETY LOAD software * download of BTS software * creating an initial configuration (such as creating BBSIG,CCLK,PA,... objects) * setting the Tx output power of the RF amplifier == Reference == === Querying the BS-11 === {{{ $ ./bs11_config -p /dev/ttyUSB0 query bs11_config (C) 2009 by Harald Welte and Dieter Spaar This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY LMT LOGON: ACK PHASE: 3 Normal MBCCU0: Load MBCCU1: Load Abis-link: Restoring BS11 ATTRIBUTES: BS-11 ESN PCB Serial Number: 001107 BS-11 ESN Hardware Code Number: 135-2044/03.07 BS-11 ESN Firmware Code Number: 135-2044/03.07 SITE MANAGER ATTRIBUTES: E1 Channel: Port=0 Timeslot=1 (Full Slot) TEI: 25 BS11 Power Amplifier 0 ATTRIBUTES: TRX Power: 30mW (GSM) BS11 Power Amplifier 1 ATTRIBUTES: TRX Power: 30mW (GSM) }}} === Disconnect === This puts the BTS out of Normal mode into Maintenance mode and disconnects it from the BSC {{{ $ ./bs11_config -p /dev/ttyUSB0 disconnect bs11_config (C) 2009 by Harald Welte and Dieter Spaar This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY LMT LOGON: ACK PHASE: 3 Normal MBCCU0: Load MBCCU1: Load Abis-link: Restoring PHASE: 2 Maintenance MBCCU0: Load MBCCU1: Load Abis-link: Down }}} === Reconnect === This puts the BTS out of Maintenance mode into Normal mode and reconnects it to the BSC {{{ $ ./bs11_config -p /dev/ttyUSB0 reconnect bs11_config (C) 2009 by Harald Welte and Dieter Spaar This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY LMT LOGON: ACK PHASE: 2 Maintenance MBCCU0: Load MBCCU1: Load Abis-link: Down PHASE: 3 Normal MBCCU0: Load MBCCU1: Load Abis-link: Restoring }}} === Download SMU Safety Load === {{{ $ ./bs11_config -p /dev/ttyUSB0 -S /path/to/my/BTSBMC76.SWI }}} '''NOTE: The OpenBSC/bs11-abis project is not providing any Firmware images for the BS-11, as they are copyrighted material''' === Minimal Configuration === The minimal configuration is automatically created if the BS-11 enters the ''MINIMAL CONFIG REQUIRED'' state after the SMU safety load is installed. === Download Software Load === {{{ $ ./bs11_config -p /dev/ttyUSB0 -s /path/to/my/HS011106.SWL }}} If the BS-11 is not in Maintenance State, it first needs to be detached from the BSC (using -D option) {{{ $ ./bs11_config -p /dev/ttyUSB0 -D -s /path/to/my/HS011106.SWL }}} If you want to force a download, just add the ''-f'' parameter. '''NOTE: OpenBSC is not providing any Firmware images for the BS-11''' === Observing BS-11 boot process === This is the output of bs11_config while observing the boot process. You will see every line many times, as the status is refreshed every five seconds. {{{ $./bs11_config -p /dev/ttyUSB0 bs11_config (C) 2009 by Harald Welte and Dieter Spaar This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY LMT LOGON: ACK T-Link: Down Abis-link: Down MBCCU0: No Load MBCCU1: No Load PHASE: 1 SUBPHASE: Warm Up... T-Link: Down Abis-link: Down MBCCU0: No Load MBCCU1: No Load PHASE: 1 SUBPHASE: Load SMU Intended... T-Link: Down Abis-link: Down MBCCU0: No Load MBCCU1: No Load PHASE: 2 SUBPHASE: Load MBCCU... T-Link: Down Abis-link: Down MBCCU0: No Load MBCCU1: Load BTSCAC PHASE: 2 SUBPHASE: Load MBCCU... T-Link: Down Abis-link: Down MBCCU0: Load BTSCAC MBCCU1: Load BTSCAC PHASE: 2 SUBPHASE: Load MBCCU... T-Link: Down Abis-link: Down MBCCU0: Load BTSCAC MBCCU1: Load BTSDRX PHASE: 2 SUBPHASE: Load MBCCU... T-Link: Down Abis-link: Down MBCCU0: Load BTSDRX MBCCU1: Load BTSDRX PHASE: 2 SUBPHASE: Load MBCCU... T-Link: Down Abis-link: Down MBCCU0: Load BTSDRX MBCCU1: Load BTSBBX PHASE: 2 SUBPHASE: Load MBCCU... T-Link: Down Abis-link: Down MBCCU0: Load BTSBBX MBCCU1: Load BTSBBX PHASE: 2 SUBPHASE: Load MBCCU... T-Link: Down Abis-link: Down MBCCU0: Load BTSBBX MBCCU1: Load BTSARC PHASE: 2 SUBPHASE: Load MBCCU... T-Link: Down Abis-link: Down MBCCU0: Load BTSARC MBCCU1: Load BTSARC PHASE: 2 SUBPHASE: Load MBCCU... T-Link: Down Abis-link: Down MBCCU0: Load BTSARC MBCCU1: Load PHASE: 2 SUBPHASE: Load MBCCU... T-Link: Down Abis-link: Down MBCCU0: Load MBCCU1: Load PHASE: 2 SUBPHASE: Load MBCCU... T-Link: Down Abis-link: Restoring MBCCU0: Load MBCCU1: Load PHASE: 3 SUBPHASE: Normal... T-Link: Down Abis-link: Up MBCCU0: Load MBCCU1: Load PHASE: 3 SUBPHASE: Normal... }}}