OsmoSDR » History » Version 22
laforge, 02/28/2016 06:49 PM
1 | 16 | {{>toc}} |
|
---|---|---|---|
2 | 1 | ||
3 | 21 | laforge | *NOTE: OsmoSDR has been phased out, the hardware is no longer available and the project is unmaintained* |
4 | |||
5 | 16 | h1. Welcome to [[OsmoSDR]] |
|
6 | |||
7 | |||
8 | [[OsmoSDR]] is a 100% Free Software based small form-factor inexpensive |
||
9 | 1 | SDR (Software Defined Radio) project. |
|
10 | 2 | laforge | |
11 | 16 | If you are familiar with existing SDR receivers, then [[OsmoSDR]] can be thought |
|
12 | of something in between a "FunCube Dongle":http://tetra.osmocom.org/trac/wiki/Funcube_Dongle (only 96kHz bandwidth) and a USRP (much more expensive). |
||
13 | 20 | laforge | For a very cheap SDR (with limited dynamic range), you can use the DVB-T USB stick using the RTL2832U chip, as documented in [[sdr:rtl-sdr]]. |
14 | 2 | laforge | |
15 | 16 | It consists of a USB-attached [[Hardware]], associated [[Firmware]] |
|
16 | 1 | as well as [[sdr:GrOsmoSDR]] gnuradio integration on the PC. |
|
17 | |||
18 | 21 | laforge | The first generation hardware (1.2 MS/s) was available to interested developers from http://shop.sysmocom.de/ *but is now sold out* |
19 | 3 | laforge | |
20 | 4 | laforge | |
21 | 18 | laforge | Hardware schematics and firmware source code are kept in a git repository on git.osmocom.org. |
22 | 19 | laforge | * clone the repository like this: @git clone git://git.osmocom.org/osmo-sdr.git@ |
23 | 4 | laforge | |
24 | 1 | ||
25 | 6 | laforge | h2. Picture |
26 | 16 | ||
27 | 12 | Hoernchen | This is a (slightly better) picture of the current developer preview: |
28 | 1 | ||
29 | 17 | laforge | !osmosdr-beta.jpg! |
30 | 13 | laforge | |
31 | 16 | h2. Mailing List |
|
32 | 13 | laforge | |
33 | 1 | ||
34 | 22 | laforge | We discuss both [[OsmoSDR]] as well as rtl-sdr on the following mailing list: osmocom-sdr@lists.osmocom.or]. |
35 | You can subscribe and/or unsubscribe via the following link: http://lists.osmocom.org/mailman/listinfo/osmocom-sdr |
||
36 | 1 | ||
37 | 16 | ||
38 | 22 | laforge | h2. Credits |
39 | |||
40 | * Stefan Reimann of "SR-Systems":http://sr-systems.de/ (electrical engineering, manufacturing) |
||
41 | 16 | * "Christian Daniel":http://www.cdaniel.de/, Matthias Kleffel and Thomas Kleffel of "maintech":http://maintech.de/ (overall design, FPGA, rum-ba) |
|
42 | * "Harald Welte":http://laforge.gnumonks.org/ of "sysmocom":http://sysmocom.de/ (sam3u firmware development) |