OsmoSDR » History » Version 26
laforge, 02/20/2022 07:20 PM
1 | 16 | {{>toc}} |
|
---|---|---|---|
2 | 1 | ||
3 | 16 | h1. Welcome to [[OsmoSDR]] |
|
4 | |||
5 | |||
6 | [[OsmoSDR]] is a 100% Free Software based small form-factor inexpensive |
||
7 | 1 | SDR (Software Defined Radio) project. |
|
8 | 2 | laforge | |
9 | 16 | If you are familiar with existing SDR receivers, then [[OsmoSDR]] can be thought |
|
10 | of something in between a "FunCube Dongle":http://tetra.osmocom.org/trac/wiki/Funcube_Dongle (only 96kHz bandwidth) and a USRP (much more expensive). |
||
11 | 20 | laforge | For a very cheap SDR (with limited dynamic range), you can use the DVB-T USB stick using the RTL2832U chip, as documented in [[sdr:rtl-sdr]]. |
12 | 2 | laforge | |
13 | 16 | It consists of a USB-attached [[Hardware]], associated [[Firmware]] |
|
14 | 1 | as well as [[sdr:GrOsmoSDR]] gnuradio integration on the PC. |
|
15 | |||
16 | 21 | laforge | The first generation hardware (1.2 MS/s) was available to interested developers from http://shop.sysmocom.de/ *but is now sold out* |
17 | 3 | laforge | |
18 | 4 | laforge | |
19 | 18 | laforge | Hardware schematics and firmware source code are kept in a git repository on git.osmocom.org. |
20 | 25 | laforge | * clone the repository like this: @git clone https://gitea.osmocom.org/sdr/osmo-sdr.git@ |
21 | 1 | ||
22 | 6 | laforge | h2. Picture |
23 | 16 | ||
24 | 12 | Hoernchen | This is a (slightly better) picture of the current developer preview: |
25 | 1 | ||
26 | 17 | laforge | !osmosdr-beta.jpg! |
27 | 13 | laforge | |
28 | 16 | h2. Mailing List |
|
29 | 13 | laforge | |
30 | 1 | ||
31 | 23 | laforge | We discuss both [[OsmoSDR]] as well as rtl-sdr on the following mailing list: osmocom-sdr@lists.osmocom.org. |
32 | 1 | You can subscribe and/or unsubscribe via the following link: http://lists.osmocom.org/mailman/listinfo/osmocom-sdr |
|
33 | 16 | ||
34 | 24 | laforge | Please make sure you read the [[cellular-infrastructure:MailingListRules]] before you start posting. |
35 | |||
36 | 22 | laforge | h2. Credits |
37 | |||
38 | * Stefan Reimann of "SR-Systems":http://sr-systems.de/ (electrical engineering, manufacturing) |
||
39 | 16 | * "Christian Daniel":http://www.cdaniel.de/, Matthias Kleffel and Thomas Kleffel of "maintech":http://maintech.de/ (overall design, FPGA, rum-ba) |
|
40 | * "Harald Welte":http://laforge.gnumonks.org/ of "sysmocom":http://sysmocom.de/ (sam3u firmware development) |