LimeSDR Build From Source » History » Version 4
Building OsmoTRX for LimeSDR from source¶
Building OsmoTRX or its dependencies from source is not required unless you want to build a specific version or test some modifications. If that's not your case and your distro is supported, please use MacroBinaryPackages.
### Build LimeSuite git clone https://github.com/myriadrf/LimeSuite.git cd LimeSuite mkdir builddir && cd builddir cmake ../ make -j5 sudo make install sudo ldconfig cd ../ sudo sh LimeSuite/udev-rules/install.sh cd ../ ### Build libosmocore git clone git://git.osmocom.org/libosmocore cd libsomocore autoreconf -fi ./configure --without-uhd --with-lms make -j5 sudo make install sudo ldconfig cd ../ ### Build osmo-trx-lms git clone git://git.osmocom.org/osmo-trx cd osmo-trx autoreconf -fi ./configure make -j5 sudo make install sudo ldconfig cd ../
run on terminal: (if rt-prio is set in .cfg file, running as root may be required).
osmo-trx-lms -C osmo-trx.git/doc/examples/osmo-trx-lms/osmo-trx-limesdr.cfg
Old osmo-trx-uhd for LimeSuite¶
This page used to contain instructions on how to build osmo-trx[-uhd] with uhd, soapy-uhd, soapysdr and LimeSuite on an Ubuntu 16.04.
osmo-trx-lms has been introduced, there is no longer any need for this complex chain of dependency. With
osmo-trx can directly use LimeSuite without any intermediaries such as UHD, SoapyUHD, SoapySDR or the like. If you're interested in the previous instructions for the older versions, please look at the History of this wiki page using the "History" tab above.
Osmocom provides binary packages for several flavors of Debian and Ubuntu GNU/Linux on a variety of architectures (i586, x86_64, armhf, armv7l). Unless you are a software developer interested in developing on Osmocom, it is recommended you use those packages instead of building from source.
For more details see Binary_Packages