TestRig » History » Revision 3
Revision 2 (laforge, 05/05/2020 08:20 PM) → Revision 3/4 (laforge, 05/05/2020 08:22 PM)
{{>toc}} h1. pySim TestRig we are running a CI setup at sysmocom to test pySim against real physical smartcards and readers. these tests are controlled by https://jenkins.osmocom.org/ and run on a dedicated jenkins node https://jenkins.osmocom.org/jenkins/computer/simtester/ h2. setup h3. hardware * the jenkins node is run inside a KVM VM on AMD APU based hardware. * there are 6 Omnikey 3121 Smart Card Readers connected to a usb-hub; the resulting usbdevices are passed through to the vm. Currently (05/2020) these types of simcards are installed and tested: * Fairwaves-SIM * fakemagicsim * sysmoISIM-SJA2 * sysmosim-gr1 * sysmoUSIM-SJS1 * Wavemobile-SIM h3. software The the tests for pySim are executed by this jenkins jenkins/gerrit job https://jenkins.osmocom.org/jenkins/job/gerrit-pysim/. The job is triggered by gerrit and acts as build verification job for any proposed pySim changes that are pushed into gerrit for review. The https://jenkins.osmocom.org/jenkins/job/gerrit-pysim/ the same hardware rig is also used for other tests (scheduled by jenkins), but this is out of scope for pySim. It it does so via a script https://git.osmocom.org/pysim/tree/contrib/jenkins.sh which in turn calls https://git.osmocom.org/pysim/tree/tests/pysim-test.sh from the /pysim-testdata directory. https://git.osmocom.org/pysim/tree/pysim-testdata holds all the information to access the cards and which output each test expects as result.