Project

General

Profile

Actions

EC25 Linux » History » Revision 4

« Previous | Revision 4/7 (diff) | Next »
laforge, 10/06/2016 04:55 PM


EC25 Linux

bootloader

Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.2-00055
S - IMAGE_VARIANT_STRING=LAATANAZA
S - OEM_IMAGE_VERSION_STRING=becking-PC
S - Boot Config, 0x000002e1
B -      1216 - PBL, Start
B -      3723 - bootable_media_detect_entry, Start
B -      5002 - bootable_media_detect_success, Start
B -      5006 - elf_loader_entry, Start
B -      8457 - auth_hash_seg_entry, Start
B -      8678 - auth_hash_seg_exit, Start
B -     51007 - elf_segs_hash_verify_entry, Start
B -     90729 - PBL, End
B -     99247 - SBL1, Start
B -    157258 - pm_device_init, Start
B -    177388 - PM_SET_VAL:Skip
D -     18086 - pm_device_init, Delta
B -    178364 - boot_config_data_table_init, Start
D -    174917 - boot_config_data_table_init, Delta - (420 Bytes)
B -    356819 - CDT version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0
B -    363255 - sbl1_ddr_set_params, Start
B -    366823 - cpr_init, Start
D -        30 - cpr_init, Delta
B -    372374 - Pre_DDR_clock_init, Start
D -       213 - Pre_DDR_clock_init, Delta
D -         0 - sbl1_ddr_set_params, Delta
B -    385093 - pm_driver_init, Start
D -      4544 - pm_driver_init, Delta
B -    397537 - sbl1_qhsusb_al_do_fast_enum, Start
D -        30 - sbl1_qhsusb_al_do_fast_enum, Delta
B -    400495 - clock_init, Start
D -       152 - clock_init, Delta
B -    406290 - boot_flash_init, Start
D -     37667 - boot_flash_init, Delta
B -    448136 - Image Load, Start
D -     56608 - QSEE Image Loaded, Delta - (451980 Bytes)
B -    504744 - Image Load, Start
D -        30 - SEC Image Loaded, Delta - (0 Bytes)
B -    512278 - sbl1_efs_handle_cookies, Start
D -         0 - sbl1_efs_handle_cookies, Delta
B -    519567 - Image Load, Start
D -     31903 - RPM Image Loaded, Delta - (151152 Bytes)
B -    551531 - Image Load, Start
D -     20710 - APPSBL Image Loaded, Delta - (178836 Bytes)
B -    572271 - QSEE Execution, Start
D -       213 - QSEE Execution, Delta
B -    578036 - SBL1, End
D -    481076 - SBL1, Delta
S - Throughput, 2000 KB/s  (782388 Bytes,  268183 us)
S - DDR Frequency, 240 MHz
Android Bootloader - UART_DM Initialized!!!
[0] welcome to lk

[0] SCM call: 0x2000601 failed with :fffffffc
[0] Failed to initialize SCM
[10] platform_init()
[10] target_init()
[10] 111 flash->id=0x2690ac2c,supported_flash[0]=0x1590ac2c, flash->id2=0x54, supported_flash_id2=0x56[20] 111 flash->id=0x2690ac2c,supported_flash[1]=0x1590ac01, flash->id2=0x54, supported_flash_id2=0x56[30] 111 flash->id=0x2690ac2c,supported_flash[2]=0x1590ac2c, flash->id2=0x54, supported_flash_id2=0x57[30] 111 flash->id=0x2690ac2c,supported_flash[3]=0x1590aa2c, flash->id2=0x54, supported_flash_id2=0x6[40] 111 flash->id=0x2690ac2c,supported_flash[4]=0x2690ac2c, flash->id2=0x54, supported_flash_id2=0x54[50] smem ptable found: ver: 4 len: 16
[60] ERROR: No devinfo partition found
[60] Neither 'config' nor 'frp' partition found
[60] CTL+C key, enter the FastBoot
[90] @Ramos Read flag qpic_nand_read_page =0x2440, 
[90] @Ramos Read flag qpic_nand_read_page result=0, 
[90] flash_read_image: success (0 errors)
[100] @Ramos Ql_check_RestoreFlag:offset=940000, magic1=78e5d4c2,magic2=54f7d60e,linuxfs_restoreFlag=0, cefs_restoreFlag=0
[110] @Ramos Read flag qpic_nand_read_page =0x2440, 
[110] @Ramos Read flag qpic_nand_read_page result=0, 
[120] flash_read_image: success (0 errors)
[120] @Ramos Ql_check_RestoreFlag:offset=940000, magic1=78e5d4c2,magic2=54f7d60e,linuxfs_restoreFlag=0, cefs_restoreFlag=0
[130] BBBBLoading (boot) image (5259264): start
[650] BBBBBLoading (boot) image (5259264): done
[660] DTB Total entry: 25, DTB version: 3
[660] Using DTB entry 0x00000129/00010000/0x00000008/0 for device 0x00000129/00010000/0x00010008/0
[680] cmdline: noinitrd  rw console=ttyHSL0,115200,n8 androidboot.hardware=qcom ehci-hcd.park=3 msm_rtb.filter=0x37 lpm_levels.sleep_disabled=1  earlycon=msm_hsl_uart,0x78b3000  androidboot.serialno=313a01a5 androidboot.baseband=msm rootfstype=ubifs rootflags=b[700] Updating device tree: start
[830] Updating device tree: done
[840] booting linux @ 0x80008000, ramdisk @ 0x80008000 (0), tags/device tree @ 0x81e00000

msm LNX version

msm LNX.LE.5.0.1-57031-9x40 mdm9607-perf /dev/ttyHSL0

root password

oelinux1, like on EC20

df

root@mdm9607-perf:~# df
Filesystem           1K-blocks      Used Available Use% Mounted on
ubi0:rootfs              57132     37260     19872  65% /
ubi1:modem               60864     33804     27060  56% /firmware
tmpfs                       64         4        60   6% /dev
tmpfs                    79788        20     79768   0% /run
tmpfs                    79788        56     79732   0% /var/volatile
tmpfs                    79788         0     79788   0% /media/ram
ubi0:usrfs               55032       916     54116   2% /data

ps

root@mdm9607-perf:~# ps axuw
PID   USER     TIME   COMMAND
    1 root       0:06 init [5]
    2 root       0:00 [kthreadd]
    3 root       0:00 [ksoftirqd/0]
    4 root       0:00 [kworker/0:0]
    5 root       0:00 [kworker/0:0H]
    6 root       0:00 [kworker/u2:0]
    7 root       0:00 [rcu_preempt]
    8 root       0:00 [rcu_sched]
    9 root       0:00 [rcu_bh]
   10 root       0:00 [khelper]
   11 root       0:00 [netns]
   12 root       0:00 [perf]
   13 root       0:00 [msm_watchdog]
   14 root       0:00 [smd_channel_clo]
   15 root       0:00 [smsm_cb_wq]
   16 root       0:00 [kworker/u2:1]
   17 root       0:00 [deferwq]
   18 root       0:00 [kworker/0:1]
   19 root       0:00 [irq/52-cpr]
   20 root       0:00 [mpm]
   21 root       0:00 [kworker/u2:2]
   22 root       0:00 [kworker/u2:3]
   29 root       0:00 [writeback]
   30 root       0:00 [crypto]
   31 root       0:00 [bioset]
   32 root       0:00 [kblockd]
   33 root       0:00 [system]
   34 root       0:00 [devfreq_wq]
   35 root       0:00 [cfg80211]
   36 root       0:00 [power_off_alarm]
   37 root       0:00 [kswapd0]
   38 root       0:00 [fsnotify_mark]
   46 root       0:00 [glink_ssr_wq]
   47 root       0:00 [apr_driver]
   48 root       0:00 [k_hsuart]
   49 root       0:00 [msm_serial_hs_0]
   50 root       0:00 [msm_serial_hs_0]
   51 root       0:00 [diag_real_time_]
   52 root       0:00 [diag_wq]
   53 root       0:00 [DIAG_USB_diag]
   54 root       0:00 [diag_cntl_wq]
   55 root       0:00 [diag_dci_wq]
   56 root       0:00 [DIAG_SMD_MODEM_]
   57 root       0:00 [DIAG_SMD_MODEM_]
   58 root       0:00 [DIAG_SMD_MODEM_]
   59 root       0:00 [DIAG_SMD_MODEM_]
   60 root       0:00 [DIAG_SMD_MODEM_]
   61 root       0:00 [DIAG_SMD_LPASS_]
   62 root       0:00 [DIAG_SMD_LPASS_]
   63 root       0:00 [DIAG_SMD_LPASS_]
   64 root       0:00 [DIAG_SMD_LPASS_]
   65 root       0:00 [DIAG_SMD_LPASS_]
   66 root       0:00 [DIAG_SMD_WCNSS_]
   67 root       0:00 [DIAG_SMD_WCNSS_]
   68 root       0:00 [DIAG_SMD_WCNSS_]
   69 root       0:00 [DIAG_SMD_WCNSS_]
   70 root       0:00 [DIAG_SMD_WCNSS_]
   71 root       0:00 [DIAG_SMD_SENSOR]
   72 root       0:00 [DIAG_SMD_SENSOR]
   73 root       0:00 [DIAG_SMD_SENSOR]
   74 root       0:00 [DIAG_SMD_SENSOR]
   75 root       0:00 [DIAG_SMD_SENSOR]
   76 root       0:00 [DIAG_SOCKMODEM_]
   77 root       0:00 [DIAG_SOCKMODEM_]
   78 root       0:00 [DIAG_SOCKMODEM_]
   79 root       0:00 [DIAG_SOCKMODEM_]
   80 root       0:00 [DIAG_SOCKMODEM_]
   81 root       0:00 [DIAG_SOCKLPASS_]
   82 root       0:00 [DIAG_SOCKLPASS_]
   83 root       0:00 [DIAG_SOCKLPASS_]
   84 root       0:00 [DIAG_SOCKLPASS_]
   85 root       0:00 [DIAG_SOCKLPASS_]
   86 root       0:00 [DIAG_SOCKWCNSS_]
   87 root       0:00 [DIAG_SOCKWCNSS_]
   88 root       0:00 [DIAG_SOCKWCNSS_]
   89 root       0:00 [DIAG_SOCKWCNSS_]
   90 root       0:00 [DIAG_SOCKWCNSS_]
   91 root       0:00 [DIAG_SOCKSENSOR]
   92 root       0:00 [DIAG_SOCKSENSOR]
   93 root       0:00 [DIAG_SOCKSENSOR]
   94 root       0:00 [DIAG_SOCKSENSOR]
   95 root       0:00 [DIAG_SOCKSENSOR]
   96 root       0:00 [DIAG_CNTL_SOCKE]
   97 root       0:00 [k_gserial]
   98 root       0:00 [k_ipa_usb]
   99 root       0:00 [uether]
  100 root       0:00 [k_gbridge]
  101 root       0:00 [therm_core:noti]
  102 root       0:00 [therm_core:noti]
  103 root       0:00 [therm_core:noti]
  104 root       0:00 [therm_core:noti]
  105 root       0:00 [therm_core:noti]
  106 root       0:00 [irq/216-tsens_i]
  107 root       0:00 [therm_core:noti]
  108 root       0:00 [therm_core:noti]
  109 root       0:00 [cfinteractive]
  110 root       0:00 [irq/170-7824900]
  111 root       0:00 [irq/155-mmc0]
  112 root       0:00 [irq/253-7864900]
  113 root       0:00 [irq/157-mmc1]
  114 root       0:00 [usb_bam_wq]
  115 root       0:00 [qsmd]
  116 root       0:00 [ipv6_addrconf]
  117 root       0:00 [msm_ipc_router]
  118 root       0:00 [irq/441-modem]
  119 root       0:00 [sysmon_wq]
  120 root       0:00 [qmi_svc_event_w]
  121 root       0:00 [kworker/0:2]
  122 root       0:00 [bam_dmux_rx]
  123 root       0:00 [bam_dmux_tx]
  124 root       0:00 [ubi_bgt0d]
  125 root       0:00 [ubi_bgt1d]
  126 root       0:00 [k_bam_data]
  127 root       0:00 [f_mtp]
  129 root       0:00 [msm_thermal:fre]
  130 root       0:00 [msm_thermal:the]
  131 root       0:00 [ubifs_bgt0_0]
  132 root       0:00 [IPCRTR]
  133 root       0:00 [modem_IPCRTR]
  185 root       0:00 [ubifs_bgt0_1]
  194 root       0:00 /sbin/adbd
  229 root       0:00 psmd
  323 root       0:00 ipacm_perf
  331 root       0:00 ipacmdiag
  342 root       0:00 QCMAP_ConnectionManager /etc/mobileap_cfg.xml d
  346 root       0:00 /usr/bin/qti
  357 root       0:00 /sbin/tftp_server
  358 root       0:00 /sbin/fs-scrub-daemon
  375 root       0:00 /usr/bin/quectel_pcm_daemon
  397 root       0:00 [sh]
  426 root       0:00 [kworker/u2:4]
  458 root       0:00 /sbin/syslogd -n -C64
  494 root       0:00 [k_gsmd]
  495 root       0:00 [k_gbam]
  509 root       0:00 /usr/bin/qmuxd
  514 root       0:00 /usr/bin/thermal-engine
  518 root       0:00 /usr/bin/netmgrd
  545 root       0:00 /usr/bin/qmi_shutdown_modem
  553 root       0:00 /usr/bin/quectel-gps-handle
  564 root       0:00 /usr/bin/quectel_monitor_daemon
  599 root       0:00 /usr/bin/quectel_daemon
  605 root       0:00 /usr/bin/quectel_psm_aware
  614 root       0:00 /usr/bin/quectel-remotefs-service
  699 root       0:00 alsaucm_test
  762 nobody     0:00 dnsmasq -i bridge0 -I lo -z --dhcp-range=bridge0,192.168.
  811 www-data   0:00 /usr/sbin/lighttpd -f /etc/lighttpd.conf
  823 root       0:00 eMBMs_TunnelingModule
  827 root       0:00 /usr/bin/qmi_ip_multiclient /etc/qmi_ip_cfg.xml
  869 root       0:00 wlan_services
  981 messageb   0:00 /usr/bin/dbus-daemon --system
 1003 root       0:00 /sbin/reboot-daemon
 1009 diag       0:00 /usr/bin/diagrebootapp
 1012 root       0:00 /usr/bin/atfwd_daemon
 1052 root       0:00 /usr/bin/pdc_daemon
 1070 root       0:00 /usr/bin/time_daemon
 1071 root       0:00 /usr/bin/mbimd
 1072 root       0:00 -sh
 1123 root       0:00 ps axuw

dmesg

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.18.20 (becking@root-mdm9607) (gcc version 4.9.2 (GCC) ) #1 PREEMPT Sat Aug
 27 18:53:52 CST 2016
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Qualcomm Technologies, Inc. MDM 9607 MTP
[    0.000000] Reserved memory: reserved region for node 'modem_adsp_region@0': base 0x82a00000, size 80 
MiB
[    0.000000] Reserved memory: reserved region for node 'cnss_debug_region@0': base 0x87a00000, size 2 M
iB
[    0.000000] Reserved memory: reserved region for node 'external_image_region@0': base 0x87c00000, size
 4 MiB
[    0.000000] Removed memory: created DMA memory pool at 0x82a00000, size 80 MiB
[    0.000000] Reserved memory: initialized node modem_adsp_region@0, compatible id removed-dma-pool
[    0.000000] Removed memory: created DMA memory pool at 0x87a00000, size 2 MiB
[    0.000000] Reserved memory: initialized node cnss_debug_region@0, compatible id removed-dma-pool
[    0.000000] Removed memory: created DMA memory pool at 0x87c00000, size 4 MiB
[    0.000000] Reserved memory: initialized node external_image_region@0, compatible id removed-dma-pool
[    0.000000] Reserved memory: allocated memory for 'audio_region@0' node: base 0x8fc00000, size 4 MiB
[    0.000000] Reserved memory: created CMA memory pool at 0x8fc00000, size 4 MiB
[    0.000000] Reserved memory: initialized node audio_region@0, compatible id shared-dma-pool
[    0.000000] cma: Reserved 4 MiB at 0x8f800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 64000
[    0.000000] free_area_init_node: node 0, pgdat c0b2d288, node_mem_map cf5ce000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 64000 pages, LIFO batch:15
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 63488
[    0.000000] Kernel command line: noinitrd  rw console=ttyHSL0,115200,n8 androidboot.hardware=qcom ehci
-hcd.park=3 msm_rtb.filter=0x37 lpm_levels.sleep_disabled=1  earlycon=msm_hsl_uart,0x78b3000  androidboot
.serialno=313a01a5 androidboot.baseband=msm rootfstype=ubifs rootflags=bulk_read root=ubi0:rootfs ubi.mtd
=15 ubi.mtd=9
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 150460K/256000K available (7235K kernel code, 812K rwdata, 3096K rodata, 288K init
, 1145K bss, 105540K reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0a1f0d4   (10333 kB)
[    0.000000]       .init : 0xc0a20000 - 0xc0a68000   ( 288 kB)
[    0.000000]       .data : 0xc0a68000 - 0xc0b33120   ( 813 kB)
[    0.000000]        .bss : 0xc0b331e4 - 0xc0c517e0   (1146 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] GIC CPU mask not found - kernel will fail to boot.
[    0.000000] GIC CPU mask not found - kernel will fail to boot.
[    0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
[    0.000000] MPM 1 irq mapping errored -517
[    0.000000] Architected mmio timer(s) running at 19.20MHz (virt).
[    0.000009] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
[    0.000025] Switching to timer-based delay loop, resolution 52ns
[    0.000044] Switched to clocksource arch_mem_counter
[    0.000729] Console: colour dummy device 80x30
[    0.000749] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS 
(lpj=192000)
[    0.000765] pid_max: default: 32768 minimum: 301
[    0.000877] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000892] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001546] Initializing cgroup subsys freezer
[    0.001573] Initializing cgroup subsys debug
[    0.001610] CPU: Testing write buffer coherency: ok
[    0.001962] Setting up static identity map for 0x806e0be0 - 0x806e0c38
[    0.002896] 
[    0.002896] **********************************************************
[    0.002913] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.002922] **                                                      **
[    0.002930] ** trace_printk() being used. Allocating extra memory.  **
[    0.002938] **                                                      **
[    0.002946] ** This means that this is a DEBUG kernel and it is     **
[    0.002954] ** unsafe for produciton use.                           **
[    0.002962] **                                                      **
[    0.002970] ** If you see this message and you are not debugging    **
[    0.002978] ** the kernel, report this immediately to your vendor!  **
[    0.002986] **                                                      **
[    0.002994] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.003002] **********************************************************
[    0.003832] MSM Memory Dump base table set up
[    0.003868] MSM Memory Dump apps data table set up
[    0.013449] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.015220] pinctrl core: initialized pinctrl subsystem
[    0.015646] regulator-dummy: no parameters
[    0.043886] NET: Registered protocol family 16
[    0.045792] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.100106] cpuidle: using governor ladder
[    0.130098] cpuidle: using governor menu
[    0.160096] cpuidle: using governor qcom
[    0.168923] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
[    0.169213] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
[    0.171905] irq: no irq domain found for /soc/pinctrl@1000000 !
[    0.172966] irq: no irq domain found for /soc/pinctrl@1000000 !
[    0.177867] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
[    0.180640] platform 4080000.qcom,mss: assigned reserved memory node modem_adsp_region@0
[    0.181049] irq: no irq domain found for /soc/pinctrl@1000000 !
[    0.181455] irq: no irq domain found for /soc/pinctrl@1000000 !
[    0.182295] mem_acc_corner: 0 <--> 0 mV 
[    0.183256] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.183270] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.184289] gpiochip_add: registered GPIOs 0 to 79 on device: 1000000.pinctrl
[    0.184309] GPIO chip 1000000.pinctrl: created GPIO range 0->79 ==> 1000000.pinctrl PIN 0->79
[    0.184889] __of_mpm_init(): MPM driver mapping exists
[    0.185424] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
[    0.185440] msm_rpm_dev_probe: APSS-RPM communication over SMD
[    0.185452] smd_open() before smd_init()
[    0.186082] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
[    0.188401] smd_channel_probe_now: allocation table not initialized
[    0.190696] mdm9607_s1: 1050 <--> 1350 mV at 1225 mV normal idle 
[    0.190868] spm_regulator_probe: name=mdm9607_s1, range=LV, voltage=1225000 uV, mode=AUTO, step rate=4800 uV/us
[    0.191383] cpr_efuse_init: apc_corner: efuse_addr = 0x000a4000 (len=0x1000)
[    0.191433] cpr_read_fuse_revision: apc_corner: fuse revision = 2
[    0.191453] cpr_parse_speed_bin_fuse: apc_corner: [row: 37]: 0x97590032313a01a5, speed_bits = 4
[    0.191535] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1100000 1250000] uV
[    0.191550] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1225000 1350000] uV
[    0.191563] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1150000] uV
[    0.192204] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
[    0.192282] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
[    0.192300] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
[    0.195274] msm-thermal soc:qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,core-limit-temp. err=-22. KTM continues
[    0.195309] msm-thermal soc:qcom,msm-thermal: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
[    0.195359] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
[    0.196387] sps:sps is ready.
[    0.198421] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
[    0.198437] msm_rpm_dev_probe: APSS-RPM communication over SMD
[    0.199447] mdm9607_s2: 750 <--> 1275 mV at 750 mV normal idle 
[    0.200421] mdm9607_s3_level: 0 <--> 0 mV at 0 mV normal idle 
[    0.200972] mdm9607_s3_level_ao: 0 <--> 0 mV at 0 mV normal idle 
[    0.201536] mdm9607_s3_floor_level: 0 <--> 0 mV at 0 mV normal idle 
[    0.202065] mdm9607_s3_level_so: 0 <--> 0 mV at 0 mV normal idle 
[    0.202788] mdm9607_s4: 1800 <--> 1950 mV at 1800 mV normal idle 
[    0.203543] mdm9607_l1: 1250 mV normal idle 
[    0.204305] mdm9607_l2: 1800 mV normal idle 
[    0.205036] mdm9607_l3: 1800 mV normal idle 
[    0.205778] mdm9607_l4: 3075 mV normal idle 
[    0.206556] mdm9607_l5: 1700 <--> 3050 mV at 1700 mV normal idle 
[    0.207260] mdm9607_l6: 1700 <--> 3050 mV at 1700 mV normal idle 
[    0.207955] mdm9607_l7: 1700 <--> 1900 mV at 1700 mV normal idle 
[    0.208680] mdm9607_l8: 1800 mV normal idle 
[    0.209361] mdm9607_l9: 1200 <--> 1250 mV at 1200 mV normal idle 
[    0.210352] mdm9607_l10: 1050 mV normal idle 
[    0.211117] mdm9607_l11: 1800 mV normal idle 
[    0.211818] mdm9607_l12_level: 0 <--> 0 mV at 0 mV normal idle 
[    0.212389] mdm9607_l12_level_ao: 0 <--> 0 mV at 0 mV normal idle 
[    0.212935] mdm9607_l12_level_so: 0 <--> 0 mV at 0 mV normal idle 
[    0.213449] mdm9607_l12_floor_lebel: 0 <--> 0 mV at 0 mV normal idle 
[    0.214202] mdm9607_l13: 1800 <--> 2850 mV at 2850 mV normal idle 
[    0.214923] mdm9607_l14: 2650 <--> 3000 mV at 2650 mV normal idle 
[    0.215174] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
[    0.215490] cpr_efuse_init: apc_corner: efuse_addr = 0x000a4000 (len=0x1000)
[    0.215540] cpr_read_fuse_revision: apc_corner: fuse revision = 2
[    0.215559] cpr_parse_speed_bin_fuse: apc_corner: [row: 37]: 0x97590032313a01a5, speed_bits = 4
[    0.215641] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1100000 1250000] uV
[    0.215656] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1225000 1350000] uV
[    0.215669] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1150000] uV
[    0.215888] cpr_init_cpr_parameters: apc_corner: up threshold = 2, down threshold = 3
[    0.215918] cpr_init_cpr_parameters: apc_corner: CPR is enabled by default.
[    0.215950] cpr_init_cpr_efuse: apc_corner: [row:65] = 0x15600283283372
[    0.215972] cpr_init_cpr_efuse: apc_corner: CPR disable fuse = 0
[    0.215986] cpr_init_cpr_efuse: apc_corner: Corner[1]: ro_sel = 0, target quot = 643
[    0.215999] cpr_init_cpr_efuse: apc_corner: Corner[2]: ro_sel = 0, target quot = 643
[    0.216012] cpr_init_cpr_efuse: apc_corner: Corner[3]: ro_sel = 0, target quot = 882
[    0.216195] cpr_config: apc_corner: Timer count: 0x17700 (for 5000 us)
[    0.216686] apc_corner: 0 <--> 0 mV 
[    0.217181] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
[    0.217258] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
[    0.217275] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
[    0.217795] msm-thermal soc:qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,core-limit-temp. err=-22. KTM continues
[    0.217825] msm-thermal soc:qcom,msm-thermal: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
[    0.217945] msm_thermal:get_kernel_cluster_info CPU0 topology not initialized.
[    0.218401] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    0.218417] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
[    0.218428] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
[    0.218893] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    0.218909] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
[    0.218924] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    0.218934] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
[    0.229022] qcom,gcc-mdm9607 1800000.qcom,gcc: Registered GCC clocks
[    0.229440] clock-a7 b010008.qcom,clock-a7: Speed bin: 4 PVS Version: 0
[    0.229519] a7ssmux: set OPP pair(400000000 Hz: 1 uV) on cpu0
[    0.229555] a7ssmux: set OPP pair(1305600000 Hz: 7 uV) on cpu0
[    0.231105] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
[    0.231190] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[    0.231208] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[    0.281649] gpiochip_find_base: found new base at 1018
[    0.281812] gpiochip_add: registered GPIOs 1018 to 1023 on device: pm8019-gpio
[    0.282108] qcom,qpnp-pin qpnp-pin-cf30ec00: qpnp_pin_probe: gpio_chip registered between 1018-1023
[    0.282283] gpiochip_find_base: found new base at 1012
[    0.282412] gpiochip_add: registered GPIOs 1012 to 1017 on device: pm8019-mpp
[    0.282843] qcom,qpnp-pin qpnp-pin-cf30ee00: qpnp_pin_probe: gpio_chip registered between 1012-1017
[    0.283137] KPI: Bootloader start count = 21414
[    0.283151] KPI: Bootloader end count = 49438
[    0.283162] KPI: Bootloader display count = 3135809712
[    0.283172] KPI: Bootloader load kernel count = 17006
[    0.283182] KPI: Kernel MPM timestamp = 70838
[    0.283192] KPI: Kernel MPM Clock frequency = 32768
[    0.283223] socinfo_print: v0.10, id=297, ver=1.0, raw_id=72, raw_ver=0, hw_plat=8, hw_plat_ver=65536
[    0.283223]  accessory_chip=0, hw_plat_subtype=0, pmic_model=65539, pmic_die_revision=131074 foundry_id=1 serial_number=825885093
[    0.283609] of_get_named_gpiod_flags: parsed 'gpio' property of node '/soc/sdcard_ext_vreg[0]' - status (0)
[    0.283817] sdcard_ext_vreg: no parameters
[    0.284046] of_get_named_gpiod_flags: parsed 'gpio' property of node '/soc/rome_vreg[0]' - status (0)
[    0.284249] rome_vreg: no parameters
[    0.284414] of_get_named_gpiod_flags: parsed 'gpio' property of node '/soc/emac_lan_vreg[0]' - status (0)
[    0.284586] emac_lan_vreg: no parameters
[    0.285674] SCSI subsystem initialized
[    0.285892] usbcore: registered new interface driver usbfs
[    0.285978] usbcore: registered new interface driver hub
[    0.286169] usbcore: registered new device driver usb
[    0.287146] cpufreq: driver msm up and running
[    0.287641] platform soc:qcom,ion:qcom,ion-heap@28: assigned reserved memory node audio_region@0
[    0.287938] ION heap system created
[    0.288125] ION heap audio created at 0x8fc00000 with size 400000
[    0.288463] msm_bus_fabric_init_driver
[    0.295560] qcom,qpnp-power-on qpnp-power-on-cf30e200: PMIC@SID0 Power-on reason: Triggered from CBL (external power supply) and 'cold' boot
[    0.295589] qcom,qpnp-power-on qpnp-power-on-cf30e200: PMIC@SID0: Unknown power-off reason
[    0.295810] input: qpnp_pon as /devices/virtual/input/input0
[    0.296252] PMIC@SID0: PM8019 v2.2 options: 3, 2, 2, 2
[    0.297342] Advanced Linux Sound Architecture Driver Initialized.
[    0.297927] Bluetooth: Core ver 2.19
[    0.297977] NET: Registered protocol family 31
[    0.297986] Bluetooth: HCI device and connection manager initialized
[    0.298000] Bluetooth: HCI socket layer initialized
[    0.298012] Bluetooth: L2CAP socket layer initialized
[    0.298055] Bluetooth: SCO socket layer initialized
[    0.298325] cfg80211: Calling CRDA to update world regulatory domain
[    0.298355] cfg80211: World regulatory domain updated:
[    0.298364] cfg80211:  DFS Master region: unset
[    0.298373] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    0.298384] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    0.298394] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    0.298403] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    0.298413] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    0.298423] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    0.298433] cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    0.298443] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    0.298453] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    0.299298] Switched to clocksource arch_mem_counter
[    0.321612] NET: Registered protocol family 2
[    0.322223] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.322258] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
[    0.322304] TCP: Hash tables configured (established 2048 bind 2048)
[    0.322353] TCP: reno registered
[    0.322366] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.322389] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.322546] NET: Registered protocol family 1
[    0.324203] futex hash table entries: 256 (order: 0, 7168 bytes)
[    0.329168] msgmni has been set to 309
[    0.330756] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.330776] io scheduler noop registered
[    0.330790] io scheduler deadline registered
[    0.330897] io scheduler cfq registered (default)
[    0.330988] gpiochip_find_base: found new base at 980
[    0.331091] gpiochip_add: registered GPIOs 980 to 1011 on device: smp2p
[    0.331237] gpiochip_find_base: found new base at 948
[    0.331328] gpiochip_add: registered GPIOs 948 to 979 on device: smp2p
[    0.331365] gpiochip_find_base: found new base at 916
[    0.331451] gpiochip_add: registered GPIOs 916 to 947 on device: smp2p
[    0.331589] gpiochip_find_base: found new base at 884
[    0.331680] gpiochip_add: registered GPIOs 884 to 915 on device: smp2p
[    0.331715] gpiochip_find_base: found new base at 852
[    0.331803] gpiochip_add: registered GPIOs 852 to 883 on device: slave-kernel
[    0.331904] gpiochip_find_base: found new base at 852
[    0.331986] gpiochip_add: registered GPIOs 852 to 883 on device: master-kernel
[    0.336911] msm_rpm_log_probe: OK
[    0.337731] of_get_named_gpiod_flags: parsed 'qcom,gpio-proxy-unvote' property of node '/soc/qcom,mss@4080000[0]' - status (-517)
[    0.338753] of_get_named_gpiod_flags: can't parse 'qcom,tx-gpio' property of node '/soc/uart@78b1000[0]'
[    0.338766] uart_tx_gpio is not available
[    0.338776] of_get_named_gpiod_flags: can't parse 'qcom,rx-gpio' property of node '/soc/uart@78b1000[0]'
[    0.338784] uart_rx_gpio is not available
[    0.338794] of_get_named_gpiod_flags: can't parse 'qcom,cts-gpio' property of node '/soc/uart@78b1000[0]'
[    0.338801] uart_cts_gpio is not available
[    0.338811] of_get_named_gpiod_flags: can't parse 'qcom,rfr-gpio' property of node '/soc/uart@78b1000[0]'
[    0.338818] uart_rfr_gpio is not available
[    0.339345] sps: BAM device 0x07884000 is not registered yet.
[    0.339620] sps:BAM 0x07884000 is registered.
[    0.341775] 78b1000.uart: ttyHS0 at MMIO 0x78b1000 (irq = 151, base_baud = 460800) is a MSM HS UART
[    0.343639] msm_serial_hs module loaded
[    0.344007] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
[    0.344044] AXI: get_pdata(): Error: Client name not found
[    0.344053] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
[    0.344062] msm_serial_hsl_probe: Bus scaling is disabled
[    0.344191] 78b3000.serial: ttyHSL0 at MMIO 0x78b3000 (irq = 153, base_baud = 460800) is a MSM
[    0.344542] msm_serial_hsl_init: driver initialized
[    0.358411] brd: module loaded
[    0.361024] loop: module loaded
[    0.362639] [Max][DTR]  [quectel_power_manager_probe:391] 
[    0.362733] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/quec,quectel-power-manager[0]' - status (0)
[    0.362746] [Max][DTR] quectel_dt_parse_gpio_info: cnt: 0, gpio[dtr] = 5
[    0.362766] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/quec,quectel-power-manager[1]' - status (0)
[    0.362778] [Max][DTR] quectel_dt_parse_gpio_info: cnt: 1, gpio[wakeup_in] = 25
[    0.362801] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/quec,quectel-power-manager[2]' - status (0)
[    0.362812] [Max][DTR] quectel_dt_parse_gpio_info: cnt: 2, gpio[sleep_ind] = 42
[    0.362822] [Max][DTR] quectel_power_manager_probe: find dtr: 5 
[    0.362829] [Max][DTR] quectel_power_manager_probe: find wakeup_in: 25 
[    0.362837] [Max][DTR] quectel_power_manager_probe: find sleep_ind: 42 
[    0.363061] [Max][DTR] quectel_power_manager_probe: OK ###############################
[    0.363328] i2c-core: driver [tabla-i2c-core] using legacy suspend method
[    0.363338] i2c-core: driver [tabla-i2c-core] using legacy resume method
[    0.363453] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
[    0.363462] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
[    0.363565] i2c-core: driver [tasha-i2c-core] using legacy suspend method
[    0.363573] i2c-core: driver [tasha-i2c-core] using legacy resume method
[    0.363746] SCSI Media Changer driver v0.25 
[    0.367443] sps: BAM device 0x07984000 is not registered yet.
[    0.367718] sps:BAM 0x07984000 is registered.
[    0.367738] msm_nand_bam_init: msm_nand_bam_init: BAM device registered: bam_handle 0xceafbc00
[    0.367951] sps:BAM 0x07984000 (va:0xd09a0000) enabled: ver:0x18, number of pipes:7
[    0.369930] msm_nand_parse_smem_ptable: Parsing partition table info from SMEM
[    0.369972] msm_nand_parse_smem_ptable: SMEM partition table found: ver: 4 len: 16
[    0.369999] msm_nand_version_check: nand_major:1, nand_minor:5, qpic_major:1, qpic_minor:5
[    0.370038] msm_nand_scan: NAND Id: 0x2690ac2c Buswidth: 8Bits Density: 512 MByte
[    0.370148] msm_nand_scan: pagesize: 4096 Erasesize: 262144 oobsize: 224 (in Bytes)
[    0.370157] msm_nand_scan: BCH ECC: 8 Bit
[    0.370171] msm_nand_scan: CFG0: 0x290409c0,           CFG1: 0x08045d5c
[    0.370171]             RAWCFG0: 0x2b8401c0,        RAWCFG1: 0x0005055d
[    0.370171]           ECCBUFCFG: 0x00000203,      ECCBCHCFG: 0x42040d10
[    0.370171]           RAWECCCFG: 0x42000d11, BAD BLOCK BYTE: 0x00000175
[    0.370193] Creating 16 MTD partitions on "7980000.nand":
[    0.370206] 0x000000000000-0x000000280000 : "sbl" 
[    0.370922] 0x000000280000-0x000000500000 : "mibib" 
[    0.371481] 0x000000500000-0x000001b00000 : "efs2" 
[    0.372041] 0x000001b00000-0x000002500000 : "sys_rev" 
[    0.372602] 0x000002500000-0x000002800000 : "tz" 
[    0.373176] 0x000002800000-0x000002b00000 : "rpm" 
[    0.373748] 0x000002b00000-0x000002e00000 : "aboot" 
[    0.374326] 0x000002e00000-0x000003800000 : "boot" 
[    0.374909] 0x000003800000-0x000004880000 : "scrub" 
[    0.375513] 0x000004880000-0x0000098c0000 : "modem" 
[    0.376071] 0x0000098c0000-0x000009bc0000 : "misc" 
[    0.376621] 0x000009bc0000-0x00000a5c0000 : "recovery" 
[    0.377163] 0x00000a5c0000-0x00000b9c0000 : "fota" 
[    0.377740] 0x00000b9c0000-0x00000d7c0000 : "recoveryfs" 
[    0.378319] 0x00000d7c0000-0x000013bc0000 : "sys_back" 
[    0.378899] 0x000013bc0000-0x000020000000 : "system" 
[    0.379492] msm_nand_probe: NANDc phys addr 0x7980000, BAM phys addr 0x7984000, BAM IRQ 164
[    0.379504] msm_nand_probe: Allocated DMA buffer at virt_addr 0xcf844000, phys_addr 0x8f844000
[    0.381895] PPP generic driver version 2.4.2
[    0.383141] cnss_configure_ramdump: ramdump addr: d2c00000, phys: 0x87a00000 subsys:'AR6320'
[    0.383501] subsys-restart: subsys_set_state(): [cf044000]: subsys_set_state 1
[    0.383563] cnss_sdio 87a00000.qcom,cnss-sdio: CNSS SDIO Driver registered
[    0.384071] msm_otg 78d9000.usb: msm_otg probe
[    0.384267] of_get_named_gpiod_flags: can't parse 'qcom,hub-reset-gpio' property of node '/soc/usb@78d9000[0]'
[    0.384280] of_get_named_gpiod_flags: can't parse 'qcom,sw-sel-gpio' property of node '/soc/usb@78d9000[0]'
[    0.384315] of_get_named_gpiod_flags: parsed 'qcom,usbid-gpio' property of node '/soc/usb@78d9000[0]' - status (0)
[    0.384335] of_get_named_gpiod_flags: can't parse 'qcom,hsusb-otg-vddmin-gpio' property of node '/soc/usb@78d9000[0]'
[    0.386080] msm_otg 78d9000.usb: OTG regs = d08ee000
[    0.388188] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.388506] ehci-msm: Qualcomm On-Chip EHCI Host Controller
[    0.388829] usbcore: registered new interface driver cdc_acm
[    0.388838] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    0.388918] usbcore: registered new interface driver usb-storage
[    0.388963] usbcore: registered new interface driver ums-alauda
[    0.389006] usbcore: registered new interface driver ums-cypress
[    0.389048] usbcore: registered new interface driver ums-datafab
[    0.389090] usbcore: registered new interface driver ums-freecom
[    0.389131] usbcore: registered new interface driver ums-isd200
[    0.389173] usbcore: registered new interface driver ums-jumpshot
[    0.389214] usbcore: registered new interface driver ums-karma
[    0.389256] usbcore: registered new interface driver ums-onetouch
[    0.389297] usbcore: registered new interface driver ums-sddr09
[    0.389349] usbcore: registered new interface driver ums-sddr55
[    0.389393] usbcore: registered new interface driver ums-usbat
[    0.389446] usbcore: registered new interface driver usb_ehset_test
[    0.390646] gbridge_init: gbridge_init successs.
[    0.392096] qcom,qpnp-rtc qpnp-rtc-cf30ea00: rtc core: registered qpnp_rtc as rtc0
[    0.392346] i2c /dev entries driver
[    0.393036] unable to find DT imem DLOAD mode node
[    0.393325] unable to find DT imem EDLOAD mode node
[    0.393566] unable to find DT imem dload-type node
[    0.396381] msm_otg 78d9000.usb: phy_reset: success
[    0.414812] Bluetooth: HCI UART driver ver 2.2
[    0.414827] Bluetooth: HCI H4 protocol initialized
[    0.414836] Bluetooth: HCI_IBS protocol initialized
[    0.414967] of_get_named_gpiod_flags: parsed 'qca,bt-reset-gpio' property of node '/bt_qca6174[0]' - status (0)
[    0.414981] bt_dt_parse_vreg_info: qca,bt-vdd-core: is not provided in device tree
[    0.415025] bt_power bt_qca6174: no qca,bt-vdd-pa-voltage-level property
[    0.415035] bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree
[    0.415045] bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
[    0.415871] sdhci: Secure Digital Host Controller Interface driver
[    0.415883] sdhci: Copyright(c) Pierre Ossman
[    0.415895] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.416318] sdhci_msm 7824900.sdhci: sdhci_msm_probe: ICE device is not enabled
[    0.416344] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/soc/sdhci@7824900[0]'
[    0.416365] sdhci_msm 7824900.sdhci: No vreg data found for vdd
[    0.416536] sdhci_msm 7824900.sdhci: sdhci_msm_pm_qos_parse_irq: error -22 reading irq cpu
[    0.416548] sdhci_msm 7824900.sdhci: sdhci_msm_pm_qos_parse: PM QoS voting for IRQ will be disabled
[    0.416561] sdhci_msm 7824900.sdhci: sdhci_msm_pm_qos_parse: PM QoS voting for cpu group will be disabled
[    0.419001] sdhci_msm 7824900.sdhci: sdhci_msm_probe: sdiowakeup_irq = 354
[    0.419359] sdhci_msm 7824900.sdhci: No vmmc regulator found
[    0.419372] sdhci_msm 7824900.sdhci: No vqmmc regulator found
[    0.419719] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 32-bit ADMA in legacy mode
[    0.448402] sdhci_msm 7864900.sdhci: sdhci_msm_probe: ICE device is not enabled
[    0.448423] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/soc/sdhci@07864900[0]'
[    0.448678] sdhci_msm 7864900.sdhci: sdhci_msm_pm_qos_parse_irq: error -22 reading irq cpu
[    0.448690] sdhci_msm 7864900.sdhci: sdhci_msm_pm_qos_parse: PM QoS voting for IRQ will be disabled
[    0.448704] sdhci_msm 7864900.sdhci: sdhci_msm_pm_qos_parse: PM QoS voting for cpu group will be disabled
[    0.455863] sdhci_msm 7864900.sdhci: No vmmc regulator found
[    0.455880] sdhci_msm 7864900.sdhci: No vqmmc regulator found
[    0.456247] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 32-bit ADMA in legacy mode
[    0.485495] usbcore: registered new interface driver usbhid
[    0.485507] usbhid: USB HID core driver
[    0.486860] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
[    0.487468] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
[    0.487807] coresight-fuse a601c.fuse: QPDI fuse not specified
[    0.487895] coresight-fuse a601c.fuse: Fuse initialized
[    0.490894] coresight-csr 6001000.csr: CSR initialized
[    0.494779] coresight-tmc 6026000.tmc: Byte Counter feature enabled
[    0.495208] sps:BAM 0x06084000 is registered.
[    0.495457] coresight-tmc 6026000.tmc: TMC initialized
[    0.495744] coresight-tmc 6025000.tmc: TMC initialized
[    0.497229] nidnt boot config: 0
[    0.498006] coresight-tpiu 6020000.tpiu: NIDnT on SDCARD only mode
[    0.498130] coresight-tpiu 6020000.tpiu: TPIU initialized
[    0.499184] coresight-replicator 6024000.replicator: REPLICATOR initialized
[    0.499695] coresight-stm 6002000.stm: STM initialized
[    0.500312] coresight-hwevent 606c000.hwevent: Hardware Event driver initialized
[    0.501492] @Ramos Qstart_init entry !!!
[    0.501793] [Max][SMEM] qsmem_init running: misc_register return 0
[    0.501810] [Sunyd]==========>>[SMD] qsmd_init running...
[    0.504308] sps:BAM 0x078c4000 is registered.
[    0.504357] IPA HW is not supported on this target
[    0.514794] msm-compr-dsp soc:qcom,msm-compr-dsp: msm_compr_probe: dev name soc:qcom,msm-compr-dsp
[    0.516424] msm_pcm_probe: dev name soc:qcom,msm-voice-host-pcm
[    0.521180] mdm9607-asoc-tomtom soc:sound: ASoC: platform (null) not registered
[    0.521511] Netfilter messages via NETLINK v0.30.
[    0.521581] nf_conntrack version 0.5.0 (2478 buckets, 9912 max)
[    0.521970] ctnetlink v0.93: registering with nfnetlink.
[    0.522268] ip_set: protocol 6
[    0.522627] ip_tables: (C) 2000-2006 Netfilter Core Team
[    0.522784] arp_tables: (C) 2002 David S. Miller
[    0.522819] TCP: cubic registered
[    0.523292] NET: Registered protocol family 10
[    0.524260] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    0.524476] sit: IPv6 over IPv4 tunneling driver
[    0.525026] NET: Registered protocol family 17
[    0.525107] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    0.525141] Bridge firewalling registered
[    0.525156] Ebtables v2.0 registered
[    0.526143] NET: Registered protocol family 27
[    0.528297] gpiochip_find_base: found new base at 852
[    0.528411] gpiochip_add: registered GPIOs 852 to 883 on device: slave-kernel
[    0.528640] gpiochip_find_base: found new base at 820
[    0.528740] gpiochip_add: registered GPIOs 820 to 851 on device: master-kernel
[    0.529156] of_get_named_gpiod_flags: parsed 'qcom,gpio-proxy-unvote' property of node '/soc/qcom,mss@4080000[0]' - status (0)
[    0.529796] of_get_named_gpiod_flags: parsed 'qcom,gpio-err-fatal' property of node '/soc/qcom,mss@4080000[0]' - status (0)
[    0.529815] of_get_named_gpiod_flags: parsed 'qcom,gpio-err-ready' property of node '/soc/qcom,mss@4080000[0]' - status (0)
[    0.529828] of_get_named_gpiod_flags: parsed 'qcom,gpio-stop-ack' property of node '/soc/qcom,mss@4080000[0]' - status (0)
[    0.529843] of_get_named_gpiod_flags: parsed 'qcom,gpio-force-stop' property of node '/soc/qcom,mss@4080000[0]' - status (0)
[    0.529858] of_get_named_gpiod_flags: parsed 'qcom,gpio-shutdown-ack' property of node '/soc/qcom,mss@4080000[0]' - status (0)
[    0.532139] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
[    0.533732] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/qcom,smp2pgpio_test_smp2p_15_in[0]' - status (0)
[    0.533796] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/qcom,smp2pgpio_test_smp2p_15_out[0]' - status (0)
[    0.533847] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/qcom,smp2pgpio_test_smp2p_1_in[0]' - status (0)
[    0.533897] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/qcom,smp2pgpio_test_smp2p_1_out[0]' - status (0)
[    0.612246] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
[    0.612570] ubi0: attaching mtd15
[    1.300899] ubi0: scanning is finished
[    1.307269] ubi0: attached mtd15 (name "system", size 196 MiB)
[    1.307283] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
[    1.307292] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
[    1.307301] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192
[    1.307310] ubi0: good PEBs: 785, bad PEBs: 0, corrupted PEBs: 0
[    1.307318] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
[    1.307328] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1361646696
[    1.307337] ubi0: available PEBs: 0, total reserved PEBs: 785, PEBs reserved for bad PEB handling: 40
[    1.307361] ubi1: attaching mtd9
[    1.320105] ubi0: background thread "ubi_bgt0d" started, PID 124
[    1.587794] ubi1: scanning is finished
[    1.593614] ubi1: attached mtd9 (name "modem", size 80 MiB)
[    1.593628] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
[    1.593637] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
[    1.593646] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192
[    1.593654] ubi1: good PEBs: 321, bad PEBs: 0, corrupted PEBs: 0
[    1.593663] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.593673] ubi1: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 162890607
[    1.593682] ubi1: available PEBs: 0, total reserved PEBs: 321, PEBs reserved for bad PEB handling: 40
[    1.593720] RNDIS_IPA module is loaded.
[    1.594361] file system registered
[    1.594449] mbim_init: initialize 1 instances
[    1.594533] mbim_init: Initialized 1 ports
[    1.594752] ubi1: background thread "ubi_bgt1d" started, PID 125
[    1.596377] rndis_qc_init: initialize rndis QC instance
[    1.596673] Number of LUNs=8
[    1.596687] Mass Storage Function, version: 2009/09/11
[    1.596699] LUN: removable file: (no medium)
[    1.596719] Number of LUNs=1
[    1.596793] LUN: removable file: (no medium)
[    1.596802] Number of LUNs=1
[    1.597085] android_usb gadget: android_usb ready
[    1.597099] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
[    1.597146] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
[    1.597160] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_UDC_STARTED_EVENT received
[    1.597783] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
[    1.598245] qcom,qpnp-rtc qpnp-rtc-cf30ea00: setting system clock to 1970-01-01 00:01:17 UTC (77)
[    1.599384] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
[    1.601087] parse_legacy_cluster_params(): Ignoring cluster params
[    1.601103] ------------[ cut here ]------------
[    1.601121] WARNING: CPU: 0 PID: 1 at /home/becking/9X07_V/EC25_V/MDM9x07/MCU_R02/apps_proc/oe-core/build/tmp-glibc/work-shared/mdm9607-perf/kernel-source/drivers/cpuidle/lpm-levels-of.c:739 parse_cluster+0xb48/0xcac()
[    1.601129] Modules linked in:
[    1.601143] CPU: 0 PID: 1 Comm: swapper Not tainted 3.18.20 #1
[    1.601171] [<c001312c>] (unwind_backtrace) from [<c0011380>] (show_stack+0x10/0x14)
[    1.601188] [<c0011380>] (show_stack) from [<c001c1e0>] (warn_slowpath_common+0x68/0x88)
[    1.601202] [<c001c1e0>] (warn_slowpath_common) from [<c001c290>] (warn_slowpath_null+0x18/0x20)
[    1.601216] [<c001c290>] (warn_slowpath_null) from [<c03b2c30>] (parse_cluster+0xb48/0xcac)
[    1.601231] [<c03b2c30>] (parse_cluster) from [<c03b0250>] (lpm_probe+0xc/0x1ec)
[    1.601246] [<c03b0250>] (lpm_probe) from [<c025b104>] (platform_drv_probe+0x30/0x7c)
[    1.601263] [<c025b104>] (platform_drv_probe) from [<c0259950>] (driver_probe_device+0xb8/0x1dc)
[    1.601278] [<c0259950>] (driver_probe_device) from [<c0259b20>] (__driver_attach+0x68/0x8c)
[    1.601293] [<c0259b20>] (__driver_attach) from [<c025821c>] (bus_for_each_dev+0x6c/0x90)
[    1.601308] [<c025821c>] (bus_for_each_dev) from [<c02591a0>] (bus_add_driver+0xe0/0x1c8)
[    1.601322] [<c02591a0>] (bus_add_driver) from [<c025a350>] (driver_register+0x9c/0xe0)
[    1.601338] [<c025a350>] (driver_register) from [<c0a46b28>] (lpm_levels_module_init+0x14/0x38)
[    1.601353] [<c0a46b28>] (lpm_levels_module_init) from [<c00088f0>] (do_one_initcall+0xf8/0x1a0)
[    1.601368] [<c00088f0>] (do_one_initcall) from [<c0a20d30>] (kernel_init_freeable+0xf0/0x1b0)
[    1.601384] [<c0a20d30>] (kernel_init_freeable) from [<c06d87b8>] (kernel_init+0x10/0x1dc)
[    1.601399] [<c06d87b8>] (kernel_init) from [<c000dce0>] (ret_from_fork+0x14/0x34)
[    1.601408] ---[ end trace b1a68bbeb03c7033 ]---
[    1.601438] WARNING: CPU: 0 PID: 1 at /home/becking/9X07_V/EC25_V/MDM9x07/MCU_R02/apps_proc/oe-core/build/tmp-glibc/work-shared/mdm9607-perf/kernel-source/drivers/cpuidle/lpm-levels-of.c:739 parse_cluster+0xb48/0xcac()
[    1.601446] Modules linked in:
[    1.601457] CPU: 0 PID: 1 Comm: swapper Tainted: G        W      3.18.20 #1
[    1.601472] [<c001312c>] (unwind_backtrace) from [<c0011380>] (show_stack+0x10/0x14)
[    1.601486] [<c0011380>] (show_stack) from [<c001c1e0>] (warn_slowpath_common+0x68/0x88)
[    1.601499] [<c001c1e0>] (warn_slowpath_common) from [<c001c290>] (warn_slowpath_null+0x18/0x20)
[    1.601513] [<c001c290>] (warn_slowpath_null) from [<c03b2c30>] (parse_cluster+0xb48/0xcac)
[    1.601526] [<c03b2c30>] (parse_cluster) from [<c03b0250>] (lpm_probe+0xc/0x1ec)
[    1.601539] [<c03b0250>] (lpm_probe) from [<c025b104>] (platform_drv_probe+0x30/0x7c)
[    1.601553] [<c025b104>] (platform_drv_probe) from [<c0259950>] (driver_probe_device+0xb8/0x1dc)
[    1.601568] [<c0259950>] (driver_probe_device) from [<c0259b20>] (__driver_attach+0x68/0x8c)
[    1.601582] [<c0259b20>] (__driver_attach) from [<c025821c>] (bus_for_each_dev+0x6c/0x90)
[    1.601596] [<c025821c>] (bus_for_each_dev) from [<c02591a0>] (bus_add_driver+0xe0/0x1c8)
[    1.601610] [<c02591a0>] (bus_add_driver) from [<c025a350>] (driver_register+0x9c/0xe0)
[    1.601625] [<c025a350>] (driver_register) from [<c0a46b28>] (lpm_levels_module_init+0x14/0x38)
[    1.601639] [<c0a46b28>] (lpm_levels_module_init) from [<c00088f0>] (do_one_initcall+0xf8/0x1a0)
[    1.601652] [<c00088f0>] (do_one_initcall) from [<c0a20d30>] (kernel_init_freeable+0xf0/0x1b0)
[    1.601666] [<c0a20d30>] (kernel_init_freeable) from [<c06d87b8>] (kernel_init+0x10/0x1dc)
[    1.601679] [<c06d87b8>] (kernel_init) from [<c000dce0>] (ret_from_fork+0x14/0x34)
[    1.601687] ---[ end trace b1a68bbeb03c7034 ]---
[    1.601704] /soc/qcom,lpm-levels/qcom,pm-cluster@0: No CPU phandle, assuming single cluster
[    1.602659] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
[    1.604308] qcom,cc-debug-mdm9607 1800000.qcom,debug: Registered Debug Mux successfully
[    1.604900] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
[    1.605337] emac_lan_vreg: disabling
[    1.605351] rome_vreg: disabling
[    1.605359] sdcard_ext_vreg: disabling
[    1.605390] mem_acc_corner: disabling
[    1.605407] clock_late_init: Removing enables held for handed-off clocks
[    1.606971] ALSA device list:
[    1.606982]   No soundcards found.
[    1.607078] Warning: unable to open an initial console.
[    1.620132] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 131
[    1.658147] UBIFS (ubi0:0): recovery needed
[    1.830135] UBIFS (ubi0:0): recovery completed
[    1.830215] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" 
[    1.830227] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
[    1.830238] UBIFS (ubi0:0): FS size: 63741952 bytes (60 MiB, 251 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs)
[    1.830247] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
[    1.830260] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID F2A052C8-E1B3-4486-B70C-FF316E333D48, small LPT model
[    1.832661] VFS: Mounted root (ubifs filesystem) on device 0:12.
[    1.833080] Freeing unused kernel memory: 288K (c0a20000 - c0a68000)
[    1.833094] @Ramos<A1><A1>Kernel command line: noinitrd  rw console=ttyHSL0,115200,n8 androidboot.hardware=qcom ehci-hcd.park=3 msm_rtb.filter=0x37 lpm_levels.sleep_disabled=1  earlycon=msm_hsl_uart,0x78b3000  androidboot.serialno=313a01a5 androidboot.baseband=msm rootfstype=ubifs rootflags=bulk_read root=ubi0:rootfs ubi.mtd=15 ubi.mtd=9
[    1.936329] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "modem", R/O mode
[    1.936347] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
[    1.936359] UBIFS (ubi1:0): FS size: 67805184 bytes (64 MiB, 267 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs)
[    1.936368] UBIFS (ubi1:0): reserved for root: 0 bytes (0 KiB)
[    1.936380] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID C3F2EA6E-08D9-4423-9FED-EC943F9D938C, small LPT model
[    1.938752] quectel_mount_success 
[    1.938770] subsys-restart: __subsystem_get(): Changing subsys fw_name to modem
[    1.953526] pil-q6v5-mss 4080000.qcom,mss: modem: loading from 0x82a00000 to 0x87a00000
[    1.980423] pil-q6v5-mss 4080000.qcom,mss: Debug policy not present - msadp. Continue.
[    1.981161] pil-q6v5-mss 4080000.qcom,mss: Loading MBA and DP (if present) from 0x8f900000 to 0x8fa00000
[    2.028098] pil-q6v5-mss 4080000.qcom,mss: MBA boot done
[    6.224857] pil-q6v5-mss 4080000.qcom,mss: modem: Brought out of reset
[    6.324991] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
[    6.326369] pil-q6v5-mss 4080000.qcom,mss: Subsystem error monitoring/handling services are up
[    6.326423] pil-q6v5-mss 4080000.qcom,mss: modem: Power/Clock ready interrupt received
[    6.326657] M-Notify: General: 7
[    6.326697] subsys-restart: subsys_set_state(): [cf044000]: subsys_set_state 1
[    6.326714] @Ramos kernel_init try_to_run_init_process entry !!!!
[    6.326714] 
[    6.343697] @Ramos kernel_init try_to_run_init_process EXIT 11111
[    6.343697] 
[    6.529466] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
[    6.530777] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
[    6.530964] diag: In diag_send_feature_mask_update, control channel is not open, p: 0, c0beb5e8
[    6.532821] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
[    6.548058] apr_tal:Modem Is Up
[    6.548921] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
[    7.260205] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 185
[    7.260873] [Max][USB_DEF_ID_CHECK] quec_usb_pid exists!
[    7.283278] [Max][USB_DEF_ID_CHECK] quec_usb_vid exists!
[    7.283392] [Max][USB_DEF_ID_CHECK] USB ID in fs: pid is 0125 && pid is 2C7C
[    7.334697] enable_store: android_usb: already disabled
[    7.344229] UBIFS (ubi0:1): recovery needed
[    7.501159] read descriptors
[    7.501182] read strings
[    7.684348] UBIFS (ubi0:1): recovery completed
[    7.684432] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "usrfs" 
[    7.684444] UBIFS (ubi0:1): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
[    7.684455] UBIFS (ubi0:1): FS size: 61456384 bytes (58 MiB, 242 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs)
[    7.684464] UBIFS (ubi0:1): reserved for root: 0 bytes (0 KiB)
[    7.684477] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID A146802F-27F5-47D6-9E76-DE8EB380B587, small LPT model
[    8.485649] QCMAP:start
[    8.500590] QTI:start
[    8.979570] USB QCMAP NL IOCTL Snd GETNEIGH Succ
[    8.990684] enter rt5616_modinit
[    8.990759] enter rt5616_i2c_probe
[    9.055270] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICEMMODE1_DL --> VoiceMMode1 --> SEC_MI2S_RX_Voice Mixer
[    9.055289] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICEMMODE1_DL -> VoiceMMode1 -> SEC_MI2S_RX_Voice Mixer
[    9.055324] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICEMMODE2_DL --> VoiceMMode2 --> SEC_MI2S_RX_Voice Mixer
[    9.055335] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICEMMODE2_DL -> VoiceMMode2 -> SEC_MI2S_RX_Voice Mixer
[    9.082276] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICE2_STUB_DL --> Voice2 Stub --> INTERNAL_BT_SCO_RX_Voice Mixer
[    9.082296] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICE2_STUB_DL -> Voice2 Stub -> INTERNAL_BT_SCO_RX_Voice Mixer
[    9.083284] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for SENARY_MI2S_TX
[    9.083296] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route BE_IN -> direct -> SENARY_MI2S_TX
[    9.094961] ------------[ cut here ]------------
[    9.094995] WARNING: CPU: 0 PID: 410 at /home/becking/9X07_V/EC25_V/MDM9x07/MCU_R02/apps_proc/oe-core/build/tmp-glibc/work-shared/mdm9607-perf/kernel-source/net/netfilter/nf_queue.c:35 nf_register_queue_handler+0x28/0x38()
[    9.095004] Modules linked in: snd_soc_alc5616
[    9.095021] CPU: 0 PID: 410 Comm: sh Tainted: G        W      3.18.20 #1
[    9.095048] [<c001312c>] (unwind_backtrace) from [<c0011380>] (show_stack+0x10/0x14)
[    9.095065] [<c0011380>] (show_stack) from [<c001c1e0>] (warn_slowpath_common+0x68/0x88)
[    9.095079] [<c001c1e0>] (warn_slowpath_common) from [<c001c290>] (warn_slowpath_null+0x18/0x20)
[    9.095094] [<c001c290>] (warn_slowpath_null) from [<c057ebb8>] (nf_register_queue_handler+0x28/0x38)
[    9.095110] [<c057ebb8>] (nf_register_queue_handler) from [<c0598e30>] (proc_sip_segment+0x38/0x54)
[    9.095126] [<c0598e30>] (proc_sip_segment) from [<c0120930>] (proc_sys_call_handler+0x98/0xb4)
[    9.095142] [<c0120930>] (proc_sys_call_handler) from [<c012095c>] (proc_sys_write+0x10/0x18)
[    9.095156] [<c012095c>] (proc_sys_write) from [<c00d4f48>] (vfs_write+0xb8/0x170)
[    9.095168] [<c00d4f48>] (vfs_write) from [<c00d53b8>] (SyS_write+0x40/0x80)
[    9.095182] [<c00d53b8>] (SyS_write) from [<c000dc40>] (ret_fast_syscall+0x0/0x38)
[    9.095191] ---[ end trace b1a68bbeb03c7035 ]---
[    9.171020] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: mux SLIM_0_RX AANC MUX has no paths
[    9.188056] enter rt5616_probe
[    9.188079] alc5616-codec 2-001b: func: rt5616_reset, reset codec 
[    9.188201] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0x7 (ok)
[    9.188418] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.190357] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000010
[    9.210555] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000010
[    9.210836] alc5616-codec 2-001b: func: rt5616_reg_init, init codec 
[    9.210929] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x091343c8 OPER:0x00000090
[    9.211045] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.211155] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.211287] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.211415] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.211538] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.211661] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.211781] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.211902] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.212021] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.212141] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.212261] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.212380] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.212505] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx)
 bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.212625] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.212745] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.212863] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.212983] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.213128] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.213267] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.213412] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.213552] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.213693] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.213836] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.213979] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.214120] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.214263] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.214406] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.214546] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.214688] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.214828] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.214967] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.215108] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.215248] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.215391] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.215532] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.215676] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.215816] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.215958] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.216099] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.216238] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.216378] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.216534] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.216677] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.219293] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-dtmf-tx: ASoC: no sink widget found for STUB_DTMF_TX
[    9.219314] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-dtmf-tx: ASoC: Failed to add route DTMF TX -> direct -> STUB_DTMF_TX
[    9.219372] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-capture-tx: ASoC: no sink widget found for STUB_HOST_RX_CAPTURE_TX
[    9.219387] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-capture-tx: ASoC: Failed to add route CS-VOICE HOST RX CAPTURE -> direct -> STUB_HOST_RX_CAPTURE_TX
[    9.219436] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-playback-rx: ASoC: no source widget found for STUB_HOST_RX_PLAYBACK_RX
[    9.219448] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-playback-rx: ASoC: Failed to add route STUB_HOST_RX_PLAYBACK_RX -> direct -> CS-VOICE HOST RX PLAYBACK
[    9.219497] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-capture-tx: ASoC: no sink widget found for STUB_HOST_TX_CAPTURE_TX
[    9.219510] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-capture-tx: ASoC: Failed to add route CS-VOICE HOST TX CAPTURE -> direct -> STUB_HOST_TX_CAPTURE_TX
[    9.219556] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-playback-rx: ASoC: no source widget found for STUB_HOST_TX_PLAYBACK_RX
[    9.219569] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-playback-rx: ASoC: Failed to add route STUB_HOST_TX_PLAYBACK_RX -> direct -> CS-VOICE HOST TX PLAYBACK
[    9.244443] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.247326] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx)
 bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.247449] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x011363c8 OPER:0x00000090
[    9.247555] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0113e3c8 OPER:0x00000090
[    9.247665] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x091343c8 OPER:0x00000090
[    9.247771] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x091343c8 OPER:0x00000090
[    9.247874] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x091343c8 OPER:0x00000090
[    9.248009] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x091343c8 OPER:0x00000090
[    9.248146] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x091343c8 OPER:0x00000090
[    9.248284] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x091383c8 OPER:0x00000090
[    9.248454] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.822921] subsys-restart: state_show(): [cac93180]: state ONLINE
[    9.832372] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
[    9.865276] embms:start/load
[   10.068967] msm_thermal:set_enabled enabled = 0
[   10.185132] msm_otg 78d9000.usb: Avail curr from USB = 100
[   10.185477] android_work: android_work: did not send uevent (0 0   (null))
[   10.252490] subsys-restart: quec_state_show(): [cad20b00]: line: 216, quectel_restart_modem: 0
[   10.255758] android_work: android_work: sent uevent USB_STATE=CONNECTED
[   10.260697] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
[   10.359722] android_work: android_work: sent uevent USB_STATE=CONNECTED
[   10.371389] android_usb gadget: high-speed config #1: 86000c8.android_usb
[   10.371440] diag: USB channel diag connected
[   10.371652] msm_otg 78d9000.usb: Avail curr from USB = 500
[   10.372047] gbam_connect_work: gbam_connect_work: Bam channel is not ready
[   10.432191] android_work: android_work: sent uevent USB_STATE=CONFIGURED
[   10.475471] sps:BAM 0x04044000 is registered.
[   10.475673] sps:BAM 0x04044000 (va:0xd18e0000) enabled: ver:0x27, number of pipes:6
[   11.086196] random: lighttpd urandom read with 39 bits of entropy available
[   11.382939] QCMAP:Start DHCP server
[   11.420189] [Max][SMEM][qsmem_unlocked_ioctl][200] OK! QSMEM_IOCTL_SET_RDY_STATE: successful to copy data to user[qsmem_ready_state=1,pre_state=0]
[   11.420220] [Max][SMEM] find SMEM_ID_VENDOR1 OK when qsmem ready notification has come
[   11.420266] [Max][SMEM] qsmem_write over! res=0
[   11.420283] [Max][SMEM] qsmem_read wait - begin
[   11.614159] QCMAP:DHCP server started
[   11.622946] QCMAP:DHCP server started
[   11.843212] QCMAP:Init Complete
[   11.920129] [Max][SMEM] [qsmem_poll_timer_cb:110] Status=[A],AliveTime=0,condition=0
[   11.926788] eMBMs Tunneling Module:start
[   12.347910] Shortcut_FE_IPV4:start/load
[   12.394494] Shortcut_FE_IPV6:start/load
[   12.398979] gser_suspend: Un-supported transport: TTY
[   12.399035] msm_otg 78d9000.usb: Avail curr from USB = 2
[   12.399064] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received
[   12.399130] android_work: android_work: sent uevent USB_STATE=SUSPENDED
[   12.420137] [Max][SMEM] [qsmem_poll_timer_cb:110] Status=[M],AliveTime=1,condition=0
[   12.420171] [Max][SMEM] qsmem_poll_timer_cb:121 Modem Msg received.
[   12.420243] [Max][SMEM] qsmem_read wait end and del time![r=0]
[   12.457623] [Max][USB_DEF_ID_CHECK] get usb id from modem: pid=0x125, vid=0x2C7C
[   12.466277] [Max][SMEM] qsmem_write over! res=0
[   12.466302] [Max][SMEM] qsmem_read wait - begin
[   12.467023] Shortcut_FE_CM:start/load
[   12.701102] [Max][USB_DEF_ID_CHECK] cur usb id: pid is 0125,vid is 2C7C
[   12.701212] [Max][USB_DEF_ID_CHECK] test usb id: pid's 0125,vid is 2C7C
[   12.701307] [Max][USB_DEF_ID_CHECK] B_USB_ORG=[lrwxrwxrwx    1 root     root            27 Aug 27  2016 /sbin/usb/boot_hsusb_composition -> /sbin/usb/compositions/9025]
[   12.701528] [Max][USB_DEF_ID_CHECK] USB ID is still defined by Quectel! So check it...
[   12.701703] [Max][USB_DEF_ID_CHECK] test usb PID is the same with cur usb id
[   12.701770] [Max][USB_DEF_ID_CHECK] test usb VID is the same with cur usb id
[   12.746250] afe_debug_open: debug intf afe_loop_gain
[   12.746354] afe_debug_write: afe_loop_gain 4109 2
[   12.960134] [Max][SMEM] [qsmem_poll_timer_cb:110] Status=[A],AliveTime=0,condition=0
[   13.006333] subsys-restart: state_show(): [ca828580]: state ONLINE
[   13.188159] subsys-restart: state_show(): [cae5a100]: state ONLINE
[   13.200330] QTI_PPP:start
[   13.460125] [Max][SMEM] [qsmem_poll_timer_cb:110] Status=[M],AliveTime=1,condition=0
[   13.460156] [Max][SMEM] qsmem_poll_timer_cb:121 Modem Msg received.
[   13.460222] [Max][SMEM] qsmem_read wait end and del time![r=0]
[   13.542972] [Max][SMEM] QUECTEL_MODEM_SMEM_INIT_CMP has recved 1 time
[   13.586088] mbimd: Proc start
[   13.624645] mbim_open: Open mbim driver
[   13.624660] mbim_open: Lock mbim_dev->open_excl for open
[   13.624668] mbim_open: USB cable not connected
[   13.624675] mbim_open: Exit, mbim file opened
[   13.830631] [Max][DTR][(null):-1066321201] smd_open_ret = 193
[   13.830703] [Max][DTR]  [dtr_notify:165] event=2
[   13.830712] [Max][DTR] DTR SMD EVENT OPEN
[   13.830765] [Max][DTR]  [dtr_notify:165] event=4
[   13.830796] [Max][DTR] dtr_devp->flag=-1,value = 1,cbits_to_modem = 0,~cbits_to_modem = -1 func = send_data_to_smd
[   14.045105] msm_otg 78d9000.usb: USB in low power mode
[   18.613861] USB QCMAP NL IOCTL Snd GETNEIGH Succ
[   18.704247] USB QCMAP NL IOCTL Snd GETNEIGH Succ
[   33.530408] random: nonblocking pool is initialized
[   43.580662] ------------[ cut here ]------------
[   43.580730] WARNING: CPU: 0 PID: 0 at /home/becking/9X07_V/EC25_V/MDM9x07/MCU_R02/apps_proc/oe-core/build/tmp-glibc/work-shared/mdm9607-perf/kernel-source/net/core/dev.c:3413 netif_rx_internal+0x4c/0x248()
[   43.580745] Cloned packet from dev bridge0
[   43.580760] Modules linked in: shortcut_fe_cm(O) shortcut_fe_ipv6(O) shortcut_fe(O) embms_kernel(O) snd_soc_alc5616
[   43.580805] CPU: 0 PID: 0 Comm: swapper Tainted: G        W  O   3.18.20 #1
[   43.580856] [<c001312c>] (unwind_backtrace) from [<c0011380>] (show_stack+0x10/0x14)
[   43.580886] [<c0011380>] (show_stack) from [<c001c1e0>] (warn_slowpath_common+0x68/0x88)
[   43.580910] [<c001c1e0>] (warn_slowpath_common) from [<c001c22c>] (warn_slowpath_fmt+0x2c/0x3c)
[   43.580935] [<c001c22c>] (warn_slowpath_fmt) from [<c0558f80>] (netif_rx_internal+0x4c/0x248)
[   43.580960] [<c0558f80>] (netif_rx_internal) from [<c05592c0>] (netif_rx_ni+0x8c/0xf4)
[   43.580982] [<c05592c0>] (netif_rx_ni) from [<c05593e0>] (dev_loopback_xmit+0xb8/0xc4)
[   43.581009] [<c05593e0>] (dev_loopback_xmit) from [<c060d6bc>] (ip6_finish_output2+0xe0/0x4dc)
[   43.581039] [<c060d6bc>] (ip6_finish_output2) from [<c062bcfc>] (igmp6_send+0x30c/0x51c)
[   43.581067] [<c062bcfc>] (igmp6_send) from [<c062d35c>] (igmp6_timer_handler+0x2c/0x6c)
[   43.581097] [<c062d35c>] (igmp6_timer_handler) from [<c0052010>] (call_timer_fn+0x84/0x17c)
[   43.581124] [<c0052010>] (call_timer_fn) from [<c0052718>] (run_timer_softirq+0x25c/0x2a8)
[   43.581150] [<c0052718>] (run_timer_softirq) from [<c001ec08>] (__do_softirq+0x124/0x2e4)
[   43.581175] [<c001ec08>] (__do_softirq) from [<c001f038>] (irq_exit+0x80/0xdc)
[   43.581201] [<c001f038>] (irq_exit) from [<c00476bc>] (__handle_domain_irq+0x78/0x90)
[   43.581226] [<c00476bc>] (__handle_domain_irq) from [<c00086cc>] (gic_handle_irq+0x38/0x50)
[   43.581250] [<c00086cc>] (gic_handle_irq) from [<c0011d40>] (__irq_svc+0x40/0x74)
[   43.581266] Exception stack(0xc0a69ef0 to 0xc0a69f38)
[   43.581285] 9ee0:                                     00000139 00000000 00000866 000003e8
[   43.581306] 9f00: 00000001 c0a68038 8d4fdf3b 83126e97 00000001 c0add118 2595a0f5 0000000a
[   43.581325] 9f20: 00000000 c0a69f38 c00583dc c03b18fc 00000013 ffffffff
[   43.581353] [<c0011d40>] (__irq_svc) from [<c03b18fc>] (lpm_cpuidle_enter+0x3f4/0x420)
[   43.581379] [<c03b18fc>] (lpm_cpuidle_enter) from [<c03add68>] (cpuidle_enter_state+0xb8/0x254)
[   43.581408] [<c03add68>] (cpuidle_enter_state) from [<c003f434>] (cpu_startup_entry+0x1d8/0x2ac)
[   43.581439] [<c003f434>] (cpu_startup_entry) from [<c0a20bd4>] (start_kernel+0x32c/0x398)
[   43.581456] ---[ end trace b1a68bbeb03c7036 ]---

iptables

root@mdm9607-perf:/sbin# iptables --version
iptables v1.4.12.1

reboot

root@mdm9607-perf:/sbin# cat ./reboot-recovery
#! /bin/sh

echo 2 > /etc/reboot-cookie
reboot
root@mdm9607-perf:/sbin# cat ./reboot-bootloader
#! /bin/sh

echo 1 > /etc/reboot-cookie
reboot

Modem Firmware Images

root@mdm9607-perf:/firmware# find .
.
./image
./image/qwlan.bin
./image/mba.b00
./image/mba.b01
./image/mba.b02
./image/mba.b03
./image/mba.b04
./image/mba.b05
./image/mba.mbn
./image/mba.mdt
./image/tfbtnv11.bin
./image/otp.bin
./image/bdwlan.bin
./image/tfbtfw11.tlv
./image/modem.b00
./image/modem.b01
./image/modem.b02
./image/modem.b03
./image/modem.b05
./image/modem.b06
./image/modem.b07
./image/modem.b08
./image/modem.b09
./image/modem.b10
./image/modem.b11
./image/modem.b12
./image/modem.b13
./image/modem.b14
./image/modem.b15
./image/modem.b16
./image/modem.b19
./image/modem.b20
./image/modem.b21
./image/modem.b22
./image/modem.b23
./image/modem.b24
./image/modem.mdt
./image/athwlan.bin
./image/utf.bin
./image/utf30.bin
./image/fakeboar.bin
./image/qwlan30.bin
./image/qca61x4.bin

USB debugger??

root@mdm9607-perf:/sbin/usb/debuger# cat debugFiles 
_______________________________________
1       msm_otg
_______________________________________
2       ci13xxx_udc
_______________________________________
3       ci13xxx_msm
_______________________________________
4       f_gps
_______________________________________
5       f_mbim
_______________________________________
6       f_qc_ecm
_______________________________________
7       f_qc_rndis
_______________________________________
8       f_rmnet
_______________________________________
9       f_tcm
_______________________________________
10      u_bam
_______________________________________
11      u_bam_data
_______________________________________
12      usb_bam
_______________________________________
13      android
_______________________________________
14      composite
_______________________________________
15      ehci-msm-hsic
_______________________________________
16      u_qc_ether
_______________________________________
root@mdm9607-perf:/sbin/usb/debuger# cat help 
usb_debug:
        Bash script for enable or disable debug message from usb related files.
Usage:
        usb_debug [status]
        usb_debug [flag] [Operation] [As Default?] [Arg....]
status:
        show list of the active files (enable debug messaged)
flag:
        -l,     read files name from argument list. here Arg is file name (without suffix ".c")
        -f,     read filenames from Arg, here Arg is path to a file that contain list of filenames
                (each name without suffix ".c")
        all,    enable or disable debug messages from all the files in debugFiles
                (the files that the script support)
Operation:
        on,      enable debug message
        off,     disable debug message
As Default:
        y/n     enable debug messages from these files also in next power cycle?
                - set these files as default debug configuration?

*** important notes ***
1) You can always use the manual interface. Just usb_debug with no param.
2) Each default setting is overrides the previous one.
3) To insert or delete files, you have to edit debugFiles manually,
   add a new line with number(Fid) and file name (without suffix ".c").
4) debugFiles path: on target   usr/bin/usb/debuger/debugFiles
                    GIT         system/core/usb/debuger/debugFiles
5)TIP: to set the files that active now as defult use: usb_debug -f on y usr/bin/usb/debuger/statusFile
Files (2)
ec25-firmware.tar.bz2 ec25-firmware.tar.bz2 29.6 MB archive of all files in / (except sys/dev/proc/firmware) laforge, 10/06/2016 07:05 PM
ec25-rootfs.tar.bz2 ec25-rootfs.tar.bz2 25.8 MB archive of /firmware laforge, 10/06/2016 07:06 PM

Updated by laforge over 7 years ago · 4 revisions

Add picture from clipboard (Maximum size: 48.8 MB)