Actions
ASUSCOM ISDNLINK TA-200ST-D¶
ISDN TerminalAdapter made by ASUSCOM NETWORK INC, a subsidiary of ASUSTeK Computer Inc.
Product website
https://web.archive.org/web/19970417183507/http://www.asuscom.com.tw/
Hardware¶
| Supply Voltage | 12V AC |
| Power Consumption | ~4.2W |
| RS232 Connector | DB9 |
| Line Connector | RJ45 |
AT commands¶
minicom -D /dev/ttyUSB0 -b 115200
ATI0
ISDN TA S/T-Interface Version: 1.26.1
PROTOCOL : HDLC
SPEED : 64000
PACKET SIZE : 1024
OK
ATI1
SWITCH TYPE : 6 (EURO ISDN)
CODEC : 0 (A_LAW)
SPID 0 : Number=
SPID 1 : Number=
[ MSN and subaddress for Incoming Call ]
MSN (DATA-1): Number=5210 ,Protocol=AUTODETECT
Sub = ,Protocol=AUTODETECT
MSN (DATA-2): Number=5211 ,Protocol=AUTODETECT
Sub = ,Protocol=AUTODETECT
[ MSN and subaddress for Outgoing Call ]
MSN (DATA) : Number=5210 ,Sub=
OK
ATI3
DATA1:
Direction : None
B_Channel : None
Protocol : HDLC
Speed : 64000
Cause : Disconnected by User [0x0000]
Elapse Time : 0 sec
DATA2:
Direction : None
B_Channel : None
Protocol : HDLC
Speed : 64000
Cause : Disconnected by User [0x0000]
Elapse Time : 0 sec
OK
ATI5
ISDN TA;ASU2001
OK
ATI6
1.26.1
OK
ATI8
D_CHANNEL
RxPkt RxSize TxPkt TxSize ReTx OvRun FmErr
[ 0] [ 0] [ 0] [ 0] [ 0] [ 0] [ 0]
B1_CHANNEL
RxPkt RxSize TxPkt TxSize ReTx OvRun FmErr
[ 0] [ 0] [ 0] [ 0] [ 0] [ 0] [ 0]
B2_CHANNEL
RxPkt RxSize TxPkt TxSize ReTx OvRun FmErr
[ 0] [ 0] [ 0] [ 0] [ 0] [ 0] [ 0]
OK
ATI12
Log Data [0]
ATI20
MFR MODE: 255
MFR. :
MODEL : ISDN TA;ASU2003
OK
Important AT commands¶
# set/show incoming MSN AT&ZI2=5210**0 AT&ZI3=5211**0 AT&ZI? # set/show outgoing MSN AT&ZO2=5210 AT&ZO? # set the bearer protocol (see table below for possible values for n) AT&ABn
| ISDN B-channel protocol table | |
| n | description |
|---|---|
| 0 | 64K HDLC (default) |
| 11 | V.110 Async. User rate = 1200 bps (option) |
| 12 | V.110 Async. User rate = 2400 bps (option) |
| 13 | V.110 Async. User rate = 4800 bps (option) |
| 14 | V.110 Async. User rate = 9600 bps (option) |
| 15 | V.110 Async. User rate = 19200 bps (option) |
| 16 | V.110 Async. User rate = 38400 bps (option) |
| 20 | V.120 Async. |
| 3 | X.75 Transparent, the same as ATB30 |
| 30 | X.75 Transparent |
| 31 | X.75 T.70 NL |
| 32 | X.75 ISO 8208 |
| 4 | Async PPP to Sync PPP conversion |
| 41 | Async to Sync PPP conversion in ML PPP mode, compatible with Microsoft ISDN Accelerator pack |
| 42 | Async to Sync PPP conversion in ML-PPP mode with Bandwidth on Demand (BOD) |
| 5 | Bit Transparency (This command is only used for RVS-COM’ s soft-G3Fax) |
Terminal UI interface¶
The AT-command "AT@" activates a nice teminal user interface to set the most important settings
main menu¶
************************** [ ISDN Utility Program ] **************************** ** ** ** 1. Upgrade New Firmware ** ** 2. Set System Parameter ** ** 3. Set Protocol Parameter ** ** ** ** Esc. Exit ** ** ** ******************************************************************************** Please select one item :
firmware upgrade¶
Are you sure to upgrade the new firmware <Y/N>:
Note: When you press 'Y', this ISDN Utility Program will exit automatically and
go into upgrade procedure
system paramter¶
************************** [ System Parameter Table ] ************************** ** SWITCH TYPE : EURO ISDN ** ** CODEC : A-LAW STANDBY TIME: 05 sec ** ** MSN and Subaddress for Incoming Call ** ** MSN (POTS-1): SAD (POTS-1): ** ** MSN (POTS-2): SAD (POTS-2): ** ** MSN (DATA-1): 5210 SAD (DATA-1): ** ** MSN (DATA-2): 5211 SAD (DATA-2): ** ** STORED(TEL1): SAD (TEL1): ** ** STORED(TEL2): SAD (TEL2): ** ** MSN and Subaddress for Outgoing Call ** ** MSN (POTS-1): SAD (POTS-1): ** ** MSN (POTS-2): SAD (POTS-2): ** ** MSN (DATA) : 5210 SAD (DATA) : ** ** ** ** SPID-1 : SPID-2 : ** ******************************************************************************** Esc key : exit Ctl-U key : move to previous item Ctl-W key : save Ctl-D key : move to next item +,- key : select next parameter Ctl-L key : move cursor left Ctl-E key : delete character Ctl-R key : move cursor right
Protocol parameter¶
************************* [ Protocol Parameter Table ] ************************* ** Profile 0 ** ** BIT TRANSPARENT -- Packet Size: 2000 ** ** HDLC -- Packet Size: 1024 ** ** V.120 -- Packet Size: 256 Window Size: 7 ** ** X.75 (Transparent) -- Packet Size: 2048 Window Size: 1 ** ** X.75 (T.90NL) -- Packet Size: 128 Window Size: 7 ** ** X.75 (ISO8208) -- Packet Size: 1024 Window Size: 7 ** ** Profile 1 ** ** BIT TRANSPARENT -- Packet Size: 2000 ** ** HDLC -- Packet Size: 1024 ** ** V.120 -- Packet Size: 256 Window Size: 7 ** ** X.75 (Transparent) -- Packet Size: 2048 Window Size: 1 ** ** X.75 (T.90NL) -- Packet Size: 128 Window Size: 7 ** ** X.75 (ISO8208) -- Packet Size: 1024 Window Size: 7 ** ******************************************************************************** Esc key : exit Ctl-W key : save Ctl-U key : move to previous item Ctl-D key : move to next item +,- key : select next parameter
Firmware¶
Updated by roox over 1 year ago · 1 revisions
