Actions
Blatzheim BM-33k6/ISDN pro¶
- Table of contents
- Blatzheim BM-33k6/ISDN pro
ISDN TerminalAdapter with integrated V.34+ Modem.
http://www.blatzheim.com/Produkte.produkte.0.html
The device also has support for autonomous sending of SMS and FAX.
ManualHardware¶
| Supply Voltage | 10-24V AC/DC |
| Power Consumption | ~3.9W |
| Power Connector | ELSA style |
| RS232 Connector | DB9 |
| Line Connector | RJ45 |
| AUX Connector | RJ45 |
- Cypress CY7C109D (1-Mbit (128K x 8) Static RAM) CY7C109D.pdf
- 2 x BSI BS62LV1027TIP55 (128K x 8 bit CMOS SRAM) BS62LV1027.pdf
- Freescale MC68302EH25C (Quad HDLC Integrated Multiprotocol Processor) MC68QH302.pdf
...
...
...
Label¶
BM-33k6/ISDN pro Blatzheim Datensysteme GmbH, Bonn SN:0125- 00182 09 11 Made in Germany
AT commands¶
Information¶
ATI
BM-33k6/ISDN pro
(c) by BLATZHEIM Datensysteme GmbH, Bonn - GERMANY
OK
ATI0
BM-33k6/ISDN pro
(c) by BLATZHEIM Datensysteme GmbH, Bonn - GERMANY
OK
ATI1
255
205
BM-33k6/ISDN pro v3.60 released 13.05.08
Blatzheim Datensysteme GmbH, Bonn
OK
ATI2
OK
ATI3
BM-33k6/ISDN pro v3.60 released 13.05.08
OK
ATI4
BM-33k6/ISDN pro v3.60 released 13.05.08
Blatzheim Datensysteme GmbH, Bonn
MODEM CHIP : ROCKWELL RC336DPI
FAX CLASS 1, 2 and 2.0
OK
ATI5
Urloader Version 1.00
OK
ATI6
Main Board Release 2
OK
ATI7
OK
ATI8
EC Version 1.00
OK
...
...
...
ATI12
BM33k6/ISDN pro: includes Rockwell V.34+ Modem
OK
...
...
...
ATI20
Befehl: RemLvl:
'B' 1
'E' 2
'H' 0
'I' 0
'L' 1
'M' 1
'O' 0
'Q' 2
'S' 0
'V' 2
'X' 3
'Y' 3
'\A' 1
'\C' 1
'\E' 1
'\F' 0
'\G' 1
'\J' 1
'\K' 1
'\L' 1
'\N' 1
'\Q' 2
'\T' 1
'\V' 2
'\X' 2
'&C' 2
'&D' 2
'&E' 1
'&G' 1
'&H' 0
'&K' 1
'&L' 1
'&M' 2
'&O' 1
'&R' 2
'&S' 2
'&V' 0
'&W' 3
'&X' 2
'&Y' 3
'&Z' 3
'%A' 1
'%C' 1
'%E' 1
'%L' 1
'%P' 3
'%Q' 0
'%R' 0
'%XADR' 2
'%XDTE' 2
'%XFAC' 2
'%XLADR' 2
'%XNR' 2
'%XNUI' 2
'%XP' 2
'%XUSR' 2
'%&$!XY=' 3
'=' 2
'?B' 0
'?H' 0
'?O' 0
'?' 0
'*B' 1
'*D' 2
'*KEY' 3
'*L' 3
'*M' 2
'*R' 1
'*T' 2
'*FAVL' 2
'*FMEM' 2
'*FSIZ' 2
'*VMEM' 2
'$AUXON' 3
'$AUXTST' 3
'$AUXDEF' 3
'$AUXSET' 3
'$AUXMFVPW' 3
'$AUXTIME' 3
'$AUXTFACT' 3
'$AUXSER' 3
'$AUXSMS' 3
'$AUXDIAL' 3
'$AUXPULS' 3
'$SMSSMSC' 3
'$SMSNR' 3
'$FAXNR' 3
'$FAXSEND' 3
'$FAXID' 3
'$SMSSEND' 3
'$SMSTXT' 3
'$FAXTXT' 3
'$SMSLST' 3
'$FAXLST' 3
'$SMSAC' 3
'$SMSORG' 3
'$SMSSTATE' 3
'$SMSSTOP' 3
'$SMSRETRY' 3
'$FAXRETRY' 3
'$SMSEVT' 3
'$SMSFLVL' 3
'$SMSFNR' 3
'$SMSFNC' 3
'$SMSFN' 3
'$SMSFL' 3
'$SMSFPW' 3
'$SMSFS0' 3
'$SMSFRD' 3
'$SMSFRC' 3
'$A' 1
'$CCLR' 3
'$CPL' 3
'$CP' 3
'$CW' 3
'$C' 3
'$DL' 3
'$DP' 3
'$DU' 3
'$D' 3
'$E' 3
'$FCLR' 3
'$FPL' 3
'$FP' 3
'$F' 3
'$I' 3
'$J' 3
'$K' 3
'$L' 3
'$M' 3
'$NCLR' 3
'$NNL' 3
'$NN' 3
'$N' 3
'$O' 3
'$P' 3
'$R' 3
'$S' 3
'$V' 3
'$X' 3
'$H' 3
'+MS' 3
OK
ATI21
erstellt am 13.05.2008
OK
ATI22
PIN: 59H0O90000
OK
ATI23
Mainboard HW Version: 1
OK
...
...
...
ATI40
Urlader Version 1.01 vom 10.06.03
(c) 2003 Blatzheim Datensysteme GmbH
D-53173 Bonn, Germany
OK
...
...
...
ATI57
Urlader Version 1.01 vom 10.06.03
(c) 2003 Blatzheim Datensysteme GmbH
D-53173 Bonn, Germany
OK
...
...
...
ATI61
V.34 Board Release 2 V1.78 16.06.05
OK
...
...
...
ATI69
DIP-Sw 1 2 3 4
On On On On
OK
...
...
...
ATI90
PIN: 59H0O90000
OK
...
...
...
ATI95
(c) 2003 Blatzheim Datensysteme GmbH Bonn Germany
OK
...
...
...
ATI99
PIN2: 59H0O90000
OK
Important settings¶
# set MSN (up to 8) AT$M0=5210 AT$M1=5211 # show MSN (including MSN to service mappings) AT&V10 # show status (e.g. ISDN layer1) AT&V # set ISDN protocol (see table below for possible values for x) AT$Px 0 = V.110, abhängig von der DTE-Rate 1 = V.110, 9.600 bit/s 2 = V.110, 19.200 bit/s 3 = RESERVIERT 4 = V.120 5 = X.75 (Standardvorgabe) 6 = X.75 transparent, synchron 7 7 = X.75 transparent, Flag-Stuff 8 = X.75 T.70NL (früher z.B. für T-Online) 9 = RESERVIERT 10 = RESERVIERT 11 = Async. PPP auf sync. PPP (i.d.R. für Internet-Verbindungen)
ISDN call¶
ISDN X.75 call to 12345
AT$P5 ATD12345
Analog call¶
Analog calls can be forced with an exclamation mark in the end of the called number
Analog call to 56789
ATD56789!
Integrated ISDN D-channel debugger¶
ANSI colored example debug outputThe debugger can be started via register S104.
Register S104| Bit | Value0 | Value1 |
|---|---|---|
| Bit0 | 1 = Debugger enabled | 0 = disabled |
| Bit1 | reserved | |
| Bit2 | 0 = background recording | 1 = continuous output |
| Bit3 | 0 = continuous recording | 1 = abort when buffer is full |
| Bit4 | 0 = record 64 frames | 1 = record 512 frames |
| Bit5 | 0 = no HEX output | 1 = HEX output |
| Bit6 | 0 = no text output | 1 = output decoded text |
| Bit7 | 0 = no ANSI colors | 1 = with ANSI colors |
| AT command | description |
|---|---|
| ATS104 | Activate Debug |
| AT*ZDIA | Debug output in dialog mode (see manual page 45 for details) |
| AT*ZLST | Show all recorded Debug output |
| AT*ZINF | Show Debug Information (settings, ...) |
| AT*ZCLR | Clear Debug memory |
Run the debugger
AT*Z ATS104=255 AT*ZINF
Autonomous FAX¶
AT$FAXTXT set message to send (you can store up to 12 messages) AT$FAXNR set fax recpient numbers AT$FAXSEND send fax AT$FAXID set fax sender ID AT$FAXRETRY set number of retries
# define message (index 0) AT$FAXTXT 0="000 TEST TEST TEST 000" # define message (index 5) AT$FAXTXT 5="555 TEST TEST TEST 555" # query message (index 0) AT$FAXTXT 0? # query message (index 5) AT$FAXTXT 5? # query alls defined messages AT$FAXTXT ? # define fax recipient (index 0) -> number "5280" AT$FAXNR 0=5280,f # define fax recipient (index 1) -> number "5220" AT$FAXNR 1=5220,f # show all defined fax recpients AT$FAXNR ? # send fax with text from $FAXTXT (index 5) to the number defined in $FAXNR (index 0) AT$FAXSEND=0,5
Updated by roox over 1 year ago · 2 revisions
