Project

General

Profile

Actions

Siemens ULAF+ STU

The Siemens ULAF+ STU (Short instruction Termination Unit) is a modular customer premises equipment for transmitting TDM based 2 Mbit/s signals via a single copper pair using SHDSL (G.991.2).

DSC00167.JPG DSC00152.JPG DSC00154.JPG DSC00156.JPG DSC00168.JPG

The STU can be equipped with a number of different plug-in modules, including
  • G.703 RJ45
  • G.703 BNC
  • G.703 1.6/5.6
  • G.703 Sub-D
  • 10BaseT Ethernet
  • X.21
  • V.35 (M34 connector)
  • V.35; Sub-D25
  • V.36
  • Alarm/Clock

Hardware

X.21 version

DSC00145.JPG DSC00151.JPG

G.703 version

DSC00172.JPG DSC00174.JPG DSC00176.JPG DSC00177.JPG

Files (11)
DSC00151.JPG View DSC00151.JPG 2.68 MB laforge, 12/24/2023 06:28 PM
DSC00145.JPG View DSC00145.JPG 2.91 MB laforge, 12/24/2023 06:28 PM
DSC00152.JPG View DSC00152.JPG 895 KB laforge, 12/24/2023 06:28 PM
DSC00154.JPG View DSC00154.JPG 966 KB laforge, 12/24/2023 06:28 PM
DSC00156.JPG View DSC00156.JPG 1.2 MB laforge, 12/24/2023 06:28 PM
DSC00174.JPG View DSC00174.JPG 998 KB laforge, 12/24/2023 06:30 PM
DSC00176.JPG View DSC00176.JPG 993 KB laforge, 12/24/2023 06:31 PM
DSC00177.JPG View DSC00177.JPG 921 KB laforge, 12/24/2023 06:31 PM
DSC00172.JPG View DSC00172.JPG 15.8 MB laforge, 12/24/2023 06:31 PM
DSC00167.JPG View DSC00167.JPG 712 KB laforge, 12/24/2023 06:32 PM
DSC00168.JPG View DSC00168.JPG 578 KB laforge, 12/24/2023 06:32 PM

Updated by laforge about 2 months ago · 5 revisions

Add picture from clipboard (Maximum size: 48.8 MB)