Actions
Bootlog¶
Percello bootrom version 1.2.8 Board: Frequency: 19.2 Mhz Board: External boot: enabled Board: Tcxo: internal Board: MII mode: forward - Reduce: No Board: External device: Eth Board: Diagnostic console: Enabled Board: Secure mode Board: Flash type: NAND Board: flash content detected Enabling caches Valid bootloader - Internal mode PDR execution Init script wait for 65536 Init script wait for 65536 Init script wait for 256 Init script wait for 560 Init script wait for 522 Init script wait for 6656 Init script wait for 6656 Init script end!! DDR test ...DDR: lines test ... PASSED DDR: block test ... PASSED PASSED Image loading from NAND to DDR ...PASSED Secured device - OTP2: verification ...PASSED Secured device - OTP3: verification ...PASSED Running Percello bootloader PASSED Nand execute: load_addr: 3fe0000 Percello bootloader version 0.6 (from NAND) Silicon type: 6000, silicon ver: 1, feature ver: 1, ROM ver: 2 Sagemcom FM-loader v2.0.4-11 Boot 1 (cold) into main system, secured vol: size blocks last_leb name 0: 0001F800 1 0 "bootdata" 1: 0001F800 1 0 "unitdata" 2: 004AD000 38 37 "linux-A" 3: 004AD000 38 37 "linux-B" 4: 007E0000 64 63 "linux-R" 5: 00B71800 93 92 "rfs-A" 6: 00B32800 91 90 "rfs-B" 7: 00372000 28 27 "app-A" 8: 00372000 28 27 "app-B" 9: 00A17000 62 81 "data-A" 10: 0054A800 19 42 "data-B" 11: 0001F800 1 0 "bootdata_backup" 12: 0001F800 1 0 "caldata" 13: 0001F800 1 0 "caldata_backup" 14: 0001F800 1 0 "unitdata_backup" Unit key found and verified TrustStor signature check passed Group A signature check passed Kernel A signature check passed Root file system A signature check passed Application file system A signature check passed Booting system A... Linux version 2.6.31.12-femto3xx-0.3.15 (femtobuilder@bilbo.femto.urd1.local) (gcc version 4.4.1 (Sourcery G++ Lite 4.4-303) ) #1 PREEMPT RT Wed Nov 20 13:42:34 CET 2013 ISPRAM0: PA=1f000000,Size=00008000,enabled DSPRAM0: PA=1f400000,Size=00004000,enabled LINUX started... CPU revision is: 59019381 (MIPS 24Kc) Determined physical RAM map: memory: 08000000 @ 00000000 (usable) User-defined physical RAM map: memory: 08000000 @ 00000000 (usable) Zone PFN ranges: Normal 0x00000000 -> 0x00008000 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x00008000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Kernel command line: console=ttyS0,115200 prt_disable=0 mtdparts=prc6000-nand.0:0x20000@0(boot),-@0x20000(system) ubi.mtd=system root=/dev/mtdblock7 rootfstype=cramfs ethaddr=d8:6c:e9:14:92:be mem=128M panic=1 ramdisk=2M server=192.168.16.18 path=/rfs PID hash table entries: 512 (order: 9, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes Writing ErrCtl register=00000000 Readback ErrCtl register=00000000 Memory: 123732k/131072k available (3643k kernel code, 7172k reserved, 865k data, 172k init, 0k highmem) Real-Time Preemption Support (C) 2004-2007 Ingo Molnar Preemptible RCU implementation. NR_IRQS:128 CPU frequency 614.40 MHz Console: colour dummy device 80x25 Calibrating delay loop... 408.78 BogoMIPS (lpj=2043904) Mount-cache hash table entries: 512 NET: Registered protocol family 16 GPIO: registering PRC6000 chip. Access protect mask = 0x0 PRC6000 FSM: count5us =1ff0000 bio: create slab <bio-0> at 0 Slow work thread pool: Starting up Slow work thread pool: Ready FS-Cache: Loaded CacheFiles: Loaded NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 4, 114688 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered NET: Registered protocol family 1 JFFS2 version 2.2. © 2001-2006 Red Hat, Inc. fuse init (API version 7.12) msgmni has been set to 241 alg: No test for cipher_null (cipher_null-generic) alg: No test for ecb(cipher_null) (ecb-cipher_null) alg: No test for digest_null (digest_null-generic) alg: No test for compress_null (compress_null-generic) alg: No test for stdrng (krng) alg: No test for stdrng (ansi_cprng) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled serial8250.2: ttyS0 at MMIO 0x1ec01800 (irq = 8) is a 16550A console [ttyS0] enabled serial8250.2: ttyS1 at MMIO 0x1ec01c00 (irq = 9) is a 16550A brd: module loaded loop: module loaded nbd: registered device at major 43 Fixed MDIO Bus: probed IMQ driver loaded successfully. Hooking IMQ after NAT on PREROUTING. Hooking IMQ before NAT on POSTROUTING. tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> STMMAC driver: platform registration... done! DWMAC1000 - user ID: 0x10, Synopsys ID: 0x34 Enhanced descriptor structure eth0 - (dev. name: stmmaceth - id: 0, IRQ #21 IO base addr: 0xbe800000) mmi: probed eth0: PHY ID 004dd043 at 0 IRQ -1 (mii0:00) active eth0: PHY ID 004dd043 at 1 IRQ -1 (mii0:01) eth0: PHY ID 004dd043 at 2 IRQ -1 (mii0:02) eth0: PHY ID 004dd043 at 3 IRQ -1 (mii0:03) eth0: PHY ID 004dd043 at 4 IRQ -1 (mii0:04) eth0: PHY ID 00000000 at 16 IRQ -1 (mii0:10) eth0: PHY ID 00000000 at 17 IRQ -1 (mii0:11) eth0: PHY ID 00000000 at 18 IRQ -1 (mii0:12) eth0: PHY ID 00000000 at 19 IRQ -1 (mii0:13) eth0: PHY ID 40040000 at 20 IRQ -1 (mii0:14) eth0: PHY ID 00000000 at 21 IRQ -1 (mii0:15) eth0: PHY ID 00000000 at 22 IRQ -1 (mii0:16) eth0: PHY ID 00000000 at 23 IRQ -1 (mii0:17) eth0: PHY ID 00000000 at 24 IRQ -1 (mii0:18) eth0: PHY ID 00000000 at 25 IRQ -1 (mii0:19) eth0: PHY ID 00000000 at 26 IRQ -1 (mii0:1a) eth0: PHY ID 00000000 at 27 IRQ -1 (mii0:1b) eth0: PHY ID 40040000 at 28 IRQ -1 (mii0:1c) eth0: PHY ID 00000000 at 29 IRQ -1 (mii0:1d) eth0: PHY ID 00000000 at 30 IRQ -1 (mii0:1e) eth0: PHY ID 00000000 at 31 IRQ -1 (mii0:1f) physmap platform flash device: 04000000 at 18000000 physmap-flash physmap-flash.0: map_probe failed Unable to find NOR flash in prc_nand_driver PRC6000 MTD NAND Driver: ECC read delay 11uS, ECC write delay 13uS NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit) Scanning device for bad blocks Bad eraseblock 364 at 0x000002d80000 2 cmdlinepart partitions found on MTD device prc6000-nand.0 Creating 2 MTD partitions on "NAND 128MiB 3,3V 8-bit": 0x000000000000-0x000000020000 : "boot" 0x000000020000-0x000008000000 : "system" UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: attached mtd1 to ubi0 UBI: MTD device name: "system" UBI: MTD device size: 127 MiB UBI: number of good PEBs: 1022 UBI: number of bad PEBs: 1 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 15 UBI: available PEBs: 0 UBI: total number of reserved PEBs: 1022 UBI: number of PEBs reserved for bad PEB handling: 10 UBI: max/mean erase counter: 216/82 UBI: image sequence number: 1755518098 UBI: background thread "ubi_bgt0d" started, PID 892 i2c /dev entries driver prc_i2c prc_i2c.0: PRC6000 i2c bus driver. Port 0=Disabled Port 1=Enabled oprofile: using mips/24K performance monitoring. u32 classifier Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (2048 buckets, 8192 max) ctnetlink v0.93: registering with nfnetlink. IPv4 over IPv4 tunneling driver TCP cubic registered NET: Registered protocol family 17 NET: Registered protocol family 15 RPC: Registered udp transport module. RPC: Registered tcp transport module. SCTP: Hash tables configured (established 1024 bind 1170) timer1_set_mode(mode=1) timer1_set_mode(mode=3) VFS: Mounted root (cramfs filesystem) readonly on device 31:7. Freeing unused kernel memory: 172k freed =================================================== Welcome to Sagemcom Root File System Version 1.39.0 =================================================== ---- Mounting proc file system ---- Mounting ramdisk with size 32M ---- Remounting /dev/root ---- Starting syslogd ---- Mounting sysfs ---- Mounting debugfs ---- Mounting devpts ---- Creating loopback device ---- Activating Ethernet device ---- Activating firewall ---- Loading percello modules ---- Starting marsupial ---- Reset WD ---- Configuring network using dhcp Board's MAC address is: D8:6C:E9:14:92:BE Unit security level: secure 305419857 1 0 0 0 Running out of bank A Signature check ok: unitdata WARNING: /unitdata/cert/hnb.key is missing ---- Starting Monitor net.unix.max_dgram_qlen = 1000 ---- Starting StrongSwan Starting strongSwan 4.3.5 IPsec [starter]... no default route - cannot cope with %defaultroute!!! ---- Starting FAP
Further reading¶
https://pastebin.com/FgjXZ6JF seems to be another percello based device but with Ubiquisys firmware.
Updated by laforge about 6 years ago · 3 revisions