Dimetra EBTS Site Controller » History » Version 2
laforge, 02/19/2016 10:52 PM
1 | 1 | laforge | = Integrated Site Controller (CLN1480A) = |
---|---|---|---|
2 | |||
3 | This is a unit that interfaces up to 8 Base Radios with the core network of the Dimetra TETRA network (SwMI). |
||
4 | |||
5 | Hardware-wise, it is a PowerPC based system, looking very much like an old-fashioned PC mainboard with both ISA and PCI slots. |
||
6 | |||
7 | The mainboard houses the PowerPC CPU and it has slots for RAM. |
||
8 | |||
9 | There are some extension cards plugged into the system: |
||
10 | |||
11 | 2 | laforge | * Clock generation card (ISA, full length). |
12 | * has an integrated GPS receiver, to which you attach a GPS antenna |
||
13 | * generates the reference 5MHz clock distributed over Coaxial cable to the Base Radios |
||
14 | * Ethernet Card using DEC tulip chipset (PCI) |
||
15 | * This card is what talks to the Base Radios (BR) via 10-Base-2 |
||
16 | * Unknown card with RJ-45 jack (REDUND) on the back. Might be E1 |
||
17 | 1 | laforge | |
18 | There are further inputs and outputs on the system: |
||
19 | |||
20 | * A DB-15 jack for X.21 synchronous serial backhaul (2048Mbps) |
||
21 | * FIXME |
||
22 | * A RS-232 serial port for local configuration |
||
23 | |||
24 | == Images == |