Project

General

Profile

Projects

Filters

Apply Clear

Name Description
Z-Netz

Z-Netz related stuff

UUCP and UseNet

UUCP and UseNet related stuf

UmTRX

UmTRX is a dual-channel wide-band SDR transceiver that is designed to be used with ​OpenBTS and ​OsmoBTS GSM base stations. Given its SDR architecture UmTRX can easily be used with many other RF applications, and a combination of FPGA and FPRF (Field-Programmable RF) technology plus the ability to process data on a CPU or a DSP, makes it an extraordinarily flexible platform. See UmTRX....

SuperSignal AP 2820V

Research on the Vodafone/Sagem SuperSignal AP 2820V femtocell

SIMtrace 2

2nd generation SIMtrace: Uses same circuit board / peripherals as SIMtrace 1, but contains a SAM3 (Cortex-M3) instead of the SAM7 (ARM7TDMI) microcontroller. The SAM3 has a faster CPU and its internal USB peripheral offers more endpoints. This can be used for more features in the devie firmware, such as man-in-the-middle....

Sim Toolkit
SIM card related Projects
SDR (Software Defined Radio)

A collection of SDR related software + hardware projects. In particular, look at the sub-projects such as rtl-sdr, gr-osmosdr, osmo-fl2k, gr-gsm, libosmo-dsp

rtl-sdr

Software project for [ab]using DVB-T USB receivers based on RTL2132 as inexpensive SDR receivers

Retronetworking

Project about operating ancient, phased-out networking technologies such as TDM, ISDN, PDH, SDH, FDDI, ArcNet, TokenRing and others. The purpose of this is to keep alive the knowledge about the technology, and to be able to present it to interested parties....

Retrocomputing

Some general retrocomputing stuff that's not specifically networking related.

Radio Access Network

Osmocom Radio Access Network (RAN), consisting of projects like osmotrx, osmobts, osmobsc, osmopcu and osmo-hnodeb

Qualcomm Linux Modems by Quectel & Co

Information / Research on the internals of Qualcomm Linux based cellular modems available from Quectel and other vendors

pySim

pySim is a small command-line tool to program(write to) a variety of programmable sim cards.

OsmoUPF

Osmocom User Plane Function

OsmoTRX

OsmoTRX is a GSM Radio Modem based on a fork of the OpenBTS Transceiver program. It is intended to be used with the osmo-bts-trx variant of OsmoBTS in order to build GSM base stations with Abis/IP interface from general purpose SDR hardware such as USRP or LimeSDR devices....

OsmoSTP

Osmocom STP (Signal Transfer Point), implementing SS7 (MTP) routing and SIGTRAN Signalling Gateway functionality. Supports SIGTRAN only, no legacy E1/T1 based signaling links. Currently only MTP-level routing no GTR or GTT yet, but contributions in that area are very welcome....

OsmoSMSC

Scalable Smalltalk/Pharo SMSC with SMPP input and SMPP and SS7 output.

OsmoSMLC

Osmocom Serving Mobile Location Center

OsmoSGSN

OsmoSGSN is an Open Source implementation of a SGSN (Serving GPRS Support Node). It provides a 3GPP Gb/IP interface towards PCUs like OsmoPCU as well as a Gp (GTP) interface towards GGSNs like OsmoGGSN and a GSUP interface towards OsmoHLR....

OsmoPCU

OsmoPCU is an Open Source GPRS/EGPRS PCU (Packet Control Unit) with Gb/IP interface. It connects via a pcu_socket to OsmoBTS or OsmoBSC and provides RLC/MAC layer and air interface scheduling for GPRS/EGPRS. Connects via 3GPP Gb/IP to a SGSN like OsmoSGSN...

OsmoMSC

New (2017) Osmocom Mobile Switching Center (MSC). It provides a 3GPP AoIP interface towards BSCs like OsmoBSC as well as 3GPP IuCS towards RNCs or HNB-GWs like OsmoHNBGW as well as GSUP towards OsmoHLR. Also features a minimal built-in SMSC with SMPP interface....

OsmoMGW

Osmocom Media Gateway, to manage, connect and optionally transcode voice streams between different network elements such as BTSs and external entities like SIP. It is typically co-located with both OsmoBSC and OsmoMSC and controlled by them via IETF MGCP (Media Gateway Control Protocol)....

OsmoHNodeB

This is a first step towards implementing a minimal hNodeB upper layer part, mainly handling HNBAP/RUA/RANAP messages on the Iuh interface. This is not expected to be a full / usable hNodeB anytime soon [if ever].

OsmoHNBGW

An Open Source implenentation of a HNB-GW (HomeNodeB-Gateway), implementing the Iuh, IuCS and IuPS interfaces. It aggregates the Iuh links from femtocells (hNodeBs) and presents them as regular IuCS and IuPS towards MSC and SGSN (such as OsmoMSC and OsmoSGSN). It uses M3UA as signaling transport....

OsmoHLR

The Osmocom Home Location Register (OsmoHLR) is the subscriber database and authentication key store of an Osmocom 2G/3G network. It implements the GSUP protocol which is used by OsmoMSC and OsmoSGSN instead of the classic 3GPP TCAP/MAP protocols....

OsmoGSMTester

This is a python-based test framework by which we can control a set of BTSs and Modems to execute full-system end-to-end verification tests. We use this within Osmocom to du full end-to-end testing with all our network elements and real BTS + RF + Modem Hardware....

OsmoGGSN (former OpenGGSN)

OsmoGGSN is an Open Source implementation of a GGSN (Gateway GPRS Support Node). It is the successor to OpenGGSN and provides a Gp (GTP v0/v1) interface towards SGSNs like OsmoSGSN and a Gi interface towards the IP network. It supports Linux kernel GTP-U acceleration via a linux-kernel-gtp-u....

OsmoDia2GSUP

The Diameter to GSUP (HLR) adapter (OsmoDia2GSUP) enables you to connect osmo-hlr to a 4G MME. It speaks GSUP with osmo-hlr and Diameter/S6a with the MME (hence the name).

OsmocomTETRA

This project aims at practical research and experimentation with the TETRA trunked radio system. See OsmocomTETRA.

OsmocomLCS

This project contains proof-of-concept code to send GPS assistance data to mobile phones using RRLP (Radio Resource Location Protocol) as well as inquiring/obtaining their geolocation using RRLP queries. It uses OsmoNITB to operate the GSM network, and a u-blox GPS receiver to obtain the assistance data....

OsmocomGMR

This is the homepage of the Osmocom sub-project GEO Mobile Radio.

OsmocomDECT

[old, abandoned] OsmocomDECT project by Patrick McHardy, implements a linux kernel based DECT stack.

OsmocomBB SDR PHY

Up to now there was no software defined GSM mobile phone. The "SDR PHY for Osmocom BB" project aims to fill this void. The project is focused on the client side of GSM protocol stack, and bridging the gap between existing GSM stack implementation project and SDR hardware....

OsmocomBB

OsmocomBB is an Free Software / Open Source GSM Baseband software implementation. It intends to completely replace the need for a proprietary GSM baseband software.

Osmocom Libraries

This is about a set of shared C programming libraries the Osmocom project develops+maintains, such as libosmocore, libosmovty, libosmo-abis, libosmo-netif, etc.

Osmocom Conferences (OsmoDevCon, OsmoCon, OsmoDevCall)

The Osmcoom [Developer] Conference, an annual event where Osmocom Developers and Users gather

Osmocom Analog

This is a project implementing the analog cellular systems used in Germany and other countries in the past. It provides base station implementation of A-Netz (German pre-cellular), B-Netz (German pre-cellular), C-Netz (German cellular), NMT (Scandinavian: Nordisk Mobil Telefon) and AMPS/TACS (American: Advanced Mobile Phone Service)....

OsmoCBC

Osmocom Cell Broadcast Centre (CBC). It is the heart of the Cell Broadcast Service (CBS) as well as a variety of disaster/emergency warning systems (PWS).
OsmoCBC provides a REST/JSON interface for receiving cell broadcast messages from external entities and a 3GPP CBSP interface towards BSCs like OsmoBSC. Soon to be extended with SABP support towards RNCs....

OsmoBTS

OsmoBTS is an Open Source GSM BTS (Base Transceiver Station) with A-bis/IP interface. It implements support for a variety of PHY/Hardware, such as sysmocom sysmoBTS, OCTSDR-2G and LiteCell 1.5, but also general-purpose SDR boards such as USRP or LimeSDR via OsmoTRX....

OsmoBSCNAT

OsmoBSCNAT is an A-interface aggregator that can aggregate many A-interface links from many BSCs and present them as one A interface towards a MSC. Most normal networks will not need this component, it only serves some special use case scenarios. It requires SCCPLite and doesn't work with 3GPP AoIP....

OsmoBSC

OsmoBSC is an Open Source BSC (GSM Base Station Controller) with A-bis/IP and A/IP interface. It supports a variety of BTS Vendors/Models, including some Siemens, Nokia, Ericsson and ip.access models. However, main focus during the last 5+ years is OsmoBTS based BTSs....

osmo-uecups
osmo-sip-connector

This is the modern gateway between the MNCC Interface of OsmoMSC and OsmoNITB and an external SIP trunk. It converts between GSM TS 44.007 MNCC primitives on the one hand side and SIP messages on the other, while also signaling the RTP IP/port parameters for the voice user plane....

osmo-sim-auth
osmo-rfds

RF delay simulator using the ADI Pluto SDR

osmo-remsim

osmo-remsim is the Remote SIM software suite used to manage a set of phones/modems and a set of SIM/banks as well as the dynamic mappings of SIM cards to their remote phones/modems.

It consists of:
  • osmo-remsim-client: physically emulate SIM card at modem/phone using SIMtrace2 cardem or sysmoQMOD...
osmo-qcdiag

Osmocom tool for Qualcomm DIAG

osmo-pcap

Osmocom PCAP utilities, such as a distributed client/server capture architecture. It allows a number of PCAP probes on remote hosts, feeding captured packets to a central host in the network. Each probe can have different capture filters. There are multiple options for the protocol between probe and central host....

osmo-modbus

This project targets a C-Language library providing an implementation and interface to manage a Modbus node in a Modbus bus.

This library relies heavily on libosmocore library and it is aimed at being used by applications using that same library.

The Modbus specs can be found here: https://www.modbus.org/specs.php...

osmo-lab-rack

Various modules for building lab/testing setups using an industry-standard 3U component carrier

osmo-isdntap

A small program used to tap an E1 PRI line and obtain GSMTAP traces of the D channel as well as raw files with B channel content of each direction of each call.

osmo-gbproxy

The Osmocom Gb Proxy is a proxy for the 3GPP Gb interface (between BSS/PCU and SGSN). It allows you to aggregate many Gb links/connections into one. It also has the ability to convert between different Gb interface protocol stacking, such as from Gb-over-FrameRelay to Gb-over-IP....

osmo-fl2k

Osmocom project to (ab)use the DAC inside the FL2000 USB 3.0 VGA adapter to transmit radio frequency

osmo-ePDG - VoWifi Evolved Packet Data Gateway

plan for upcoming open source ePDG (IPsec cateway for VoWiFi)

osmo-e1d

Osmocom E1 daemon; used as a "software defined" implementation of E1, where the framer and HDLC controller is implemented inside osmo-e1d and a relatively simple hardware (such as USB attached hardware) interfaces with the actual E1 physical line.

osmo-e1-recorder

A program to record traffic on E1 or T1 TDM interfaces to disk. This provides tcpdump-like functionality for TDM interfaces. You can configure on a per-timeslot bases if the raw bitstream should be recorded, or if a HDLC decoder should be used. Requires a high-impedance tap and two E1/T1 ports per link you want to monitor (one for Rx, one for Tx)....

osmo-clock-gen

Osmocom Clock Generator board, using the Si5351C clock synthesizer to derive up to 8 different clocks from a single clock reference, such as a 10MHz GPS-DO or OCXO.

osmo-clock-conv

The osmo-clock-conv is a small board for low-jitter conversion of a sine clock into a square clock, based around the LTC6957-4.

osmo-ccid-firmware

Firmware for Smart Card Reader implementing the USB CCID (Circuit Card Interface Device) Specification, based on Atmel ASF4. Used on the sysmoOCTSIM 8-way CCID reader.

Osmo-CC

Osmocom Call Control. A new, protocol-agnostic way of interfacing call control of various different protocols with each other. Currently used within the osmocom-analog domain and with several endpoints.

Endpoints

OpenVizsla USB tracer/analyzer

OpenVizsla is a Open Hardware FPGA-based USB analyzer for USB Low-Speed, Full-Speed and High-Speed. Unlike other similar devices on the market, hardware design files are available as well as full source code for the firmware and client software of the device....

OpenBSC

This is a legacy all-in-one implementation of the Osmocom BSC + MSC + HLR, instead refer to OsmoBSC, OsmoMSC, OsmoHLR.

This is a project aiming to create a Free Software, (A)GPL-licensed software implementations for the GSM/3GPP protocol stacks and elements....

Open Source IMS Client

Some exploration and hacking towards putting tother an open source IMS (VoLTE, VoWiFi) client

OP25

OP25 is a not-for-profit project to bring together folks that are interested in implementing APCO P25 using a software-defined radio. Our goal is to build a software-defined analyzer for APCO P25 signals that is available under the GNU Public License (GPL)....

OCTOI - Osmocom Community TDM over IP

Building a community TDM-over-IP network so retronetworking enthusiasts can interconnect equipment with ISDN, Frame Relay or other technologies using PRI (E1) or BRI TDM technology in a private TDM network.

Nuttx-bb

This is a more experimental, work-in-progress port of the OsmocomBB Layer1 to the Nuttx RTOS

multi-voltage USB UART

A small USB UART board with two CMOS UARTs exposed on 2.54mm headers.

The logic voltage can be manually selected at 1.8, 2.3, 2.5, 2.8, 3.0 or 3.3V

mPCIe WWAN modem USB breakout board

This is a small break-out board for miniPCIe (mPCIe) type cellular / WWAN modems.

It allows you to insert a mPCIe modem from any vendor, and it will provide you with:
  • mini USB socket for connection to a USB Host (like your PC/Laptop or Embedded System)...
Mobile (in)Security

This website is intended to collect information about publicly-known security issues and other bugs of mobile communications systems, with a particular focus on the 3GPP-specified protocol layers of GSM, GPRS, EDGE and WCDMA. We collect informationon issues at any protocol layer and at any of the interfaces, i.e. the Um air interface just as well as A-bis, A, IuB, C or any of the SS7/MAP/TCAP based core network interfaces....

Miscellaneous Projects

This is basically a place-holder for everything else that doesn't fit in other places.

Misc Hardware Projects

Various uncategorized small hardware projects that don't each deserve their own redmine project

Misc DECT hacks

Various miscellaneous DECT hacks / information

M.2 (NGFF) WWAN modem USB breakout board

This is a small break-out board for M.2 (NGFF) type cellular / WWAN modems.

It allows you to insert a M.2 modem from any vendor, and it will provide you with:
  • mini USB 3 socket for connection to a USB Host (like your PC/Laptop or Embedded System)
  • 5V DC input for power supply (USB supply usually insufficient for a modem)...
M.2 (NGFF) WWAN modem + SIM Card emulation board

This is a carrier board for M.2 (NGFF) type cellular / WWAN modems with integrated SIMtrace2.

It allows you to insert a M.2 modem from any vendor, and it will provide you with:
  • mini USB 3 socket for connection to a USB Host (like your PC/Laptop or Embedded System)...
Linux Kernel GTP-U

This is an implementation of the GTP-U (user plane) inside the Linux kernel. Originally developed within Osmocom, it was brought further in cooperation by Travelping, and is now in mainline Linux since 4.7.0. You can use it as a high-performance user plane e.g. from OsmoGGSN...

linmodem

Here is the generic Linux Modem. This modem is totally software, it means that all the DSP stuff is done by the main CPU, as in some so called "winmodems".

  • Linmodem is also a research project. It contains all the necessary stuff to test new digital communication algorithms. The line simulator and the X11 interface can be used to simulate a complete communication chain....
libsmpp34

This is the Osmocom version of libsmpp34, an implementation of the SMPP Protocol v3.4

libosmocore

This covers the libosmocore.git repository including libosmocore, libosmogsm, libosmogb, libosmoctrl, libosmocodec, libosmocoding.

libosmo-sccp + libosmo-sigtran

Osmocom SCCP + Sigtran (M3UA, SUA) library

libosmo-ranap

De- / encode RANAP messages and provide Iu client implementations (to OsmoMSC for IuCS and OsmoSGSN for IuPS).
Lives in the osmo-iuh git repository.

libosmo-pfcp

PFCP protocol encoding and decoding, and generic PFCP endpoint implementation

libosmo-netif

This is a network interfacing library intended to abstract all kinds of signalling + user payload interfaces, including Abis/IP (IPA), A/IP (SCCPlite), as well as the Osmux protocol

libosmo-gprs

This project is a home for several libraries providing common GPRS routines:

  • libosmo-csn1 - CSN.1 (Concrete Syntax Notation 1) codec;
  • libosmo-gprs-rlcmac - RLC/MAC as per 3GPP TS 44.060, TS 44.018;
  • libosmo-gprs-llc - LLC (Logical Link Control) as per 3GPP TS 44.064;...
libosmo-dsp

C-language library for common DSP (Digital Signal Processing) primitives for SDR (Software Defined Radio). They are part of the Osmocom project.

libosmo-abis

This is the A-bis interface library as used by OsmoBSC/OsmoNITB

Huawei HiSilicon Cellular Modems

Information collected on Huawei cellular modems

Hardware Projects

A collection of various small (and not so small) hardware projects created as tools to the cellular research community

GSM Audio Pocket Knife

The GSM Auido Pocket Knife is a small tool that can encode and decode all of the GSM codecs and can convert between various different frame formats, such as the RTP payload formats, those used by the TI Calypso DSP, the Racal 61x3 testers, etc. You can use it as a RTP sink to play back a RTP stream from OsmoBTS. ...

gr-osmosdr

Unified gnuradio input/output block for a variety of SDR devices, including FUNcube Dongle, OsmoSDR, RTL-SDR, MSi2500, SDRplay, SDR-IQ, AirSpy, rad10, HackRF, bladeRF, USSRP/UHD, UMtrx, RedPitaya, FreeSRP, ...

gr-gsm

Gnuradio blocks and tools for receiving GSM transmissions

FidoNet

FidoNet related stuff

erlang/signerl

Erlang implementation of TCAP + MAP Signalling Protocols, runs on top of osmo_ss7 and osmo_sccp

erlang/osmo_ss7

Erlang implementation of M2UA/M3UA/MTP3/SCCP/ISUP codec + utils

erlang/osmo_sccp

Erlang implementation of SCCP (ITU-T Q.71x)

erlang/osmo_map

Erlang implementation of a TCPAP+MAP codec (encoding/decoding). You most likely want to use signerl, not this.

erlang/mgw_nat

Erlang MGW NAT/MASQ implementation

Erlang Core Network Signalling Projects

A set of almost complete Erlang projects implementing the core network protocol stacks from SS7/SIGTRAN over SCCP up to TCAP, MAP and CAP.

Currently not actively maintained due to lack of active customer/user interest.

Ericsson RBS 6xxx

This project is an attempt at an independent set of publicly-available documentation of the Ericsson RBS6xxx family of base station products.

EPC - Evolved Packet Core

Information about the Evolved Packet Core (EPC) and related open source projects

(1-100/111) Per page: 25, 50, 100, 250

Also available in: Atom CSV

Add picture from clipboard (Maximum size: 48.8 MB)