Make sure we print error message if OM2000 ENABLE RESULT is MO STATE != ENABLED
If we receive an ENABLE RESULT with MO STATE != ENABLED, something went wrong. Make sure this is printed at the according level.
#2 Updated by laforge about 3 years ago
On Thu, Oct 20, 2016 at 03:21:58PM +0000, dexter [REDMINE] wrote:
Maybe it makes sense to exit(1) if this problem occurs?
no. A BSC should never exit() on the problem of a single BTS. Why take
out all of the other BTSs juts because one has a problem?
The proper course of action would be to re-start the entire procedure,
i.e. start to re-initialize everything. The easiest might be to stop all
LAPD links for this BTS and then re-start with the 300ms SABM frames and
associated state machines.
- Harald Welte <firstname.lastname@example.org> http://laforge.gnumonks.org/ ============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)