Project

General

Profile

Support #4059

osmo-trx-lms: segfault on start LimeSDR-USB

Added by LimeSDR 13 days ago. Updated 8 days ago.

Status:
Resolved
Priority:
Normal
Assignee:
Category:
-
Target version:
-
Start date:
06/12/2019
Due date:
% Done:

100%

Spec Reference:

Description

after folowing

https://osmocom.org/projects/cellular-infrastructure/wiki/Osmocom_New_Splits_(BSC_MGW_HLR_MSC)

i am running Vbox + extetions.
2x cpu 100%
usb3 selected.
4096mb ram
128mb gpu
60gb hdd

i am doing all from a clean new installed and updated ubuntu 16.04.
i do get the next error see below.

sudo osmo-trx-lms -C ~/osmobsc/limesdr.cfg
Info: SSE3 support compiled in and supported by CPU
Info: SSE4.1 support compiled in and supported by CPU
Tue Jun 11 22:21:57 2019 DLGLOBAL <0004> telnet_interface.c:104 Available via telnet 127.0.0.1 4237
Tue Jun 11 22:21:57 2019 DLCTRL <000b> control_if.c:911 CTRL at 127.0.0.1 4236
Tue Jun 11 22:21:57 2019 DMAIN <0000> osmo-trx.cpp:478 [tid=140198298917632] Config Settings
Log Level............... 3
Device args.............
TRX Base Port........... 5700
TRX Address............. 127.0.0.1
GSM BTS Address......... 127.0.0.1
Channels................ 1
Tx Samples-per-Symbol... 4
Rx Samples-per-Symbol... 4
EDGE support............ 0
Extended RACH support... 0
Reference............... 0
C0 Filler Table......... 1
Multi-Carrier........... 0
Tuning offset........... 0
RSSI to dBm offset...... 0
Swap channels........... 0
Tx Antennas............. 'BAND1'
Rx Antennas............. 'LNAW'

Tue Jun 11 22:21:57 2019 DMAIN <0000> osmo-trx.cpp:434 [tid=140198298917632] Setting SCHED_RR priority 18
Tue Jun 11 22:21:57 2019 DDEV <0002> LMSDevice.cpp:52 [tid=140198298917632] creating LMS device...
Tue Jun 11 22:21:57 2019 DDEV <0002> LMSDevice.cpp:139 [tid=140198298917632] Opening LMS device..
Tue Jun 11 22:21:57 2019 DDEV <0002> LMSDevice.cpp:145 [tid=140198298917632] Devices found: 1
Tue Jun 11 22:21:57 2019 DDEV <0002> LMSDevice.cpp:155 [tid=140198298917632] Device [0]: LimeSDR-USB, media=USB 3.0, module=FX3, addr=1d50:6108, serial=0009060B00490D0F
Tue Jun 11 22:21:57 2019 DDEV <0002> LMSDevice.cpp:164 [tid=140198298917632] Using device0
Tue Jun 11 22:21:57 2019 DLMS <0003> LMSDevice.cpp:92 [tid=140198298917632] Reference clock 30.72 MHz
Tue Jun 11 22:21:57 2019 DDEV <0002> LMSDevice.cpp:190 [tid=140198298917632] Init LMS device
Tue Jun 11 22:21:58 2019 DDEV <0002> LMSDevice.cpp:203 [tid=140198298917632] Setting Internal clock reference
Tue Jun 11 22:21:58 2019 DLMS <0003> LMSDevice.cpp:92 [tid=140198298917632] Disabling external reference clock
Tue Jun 11 22:21:58 2019 DDEV <0002> LMSDevice.cpp:97 [tid=140198298917632] Sample Rate: Min=100000 Max=6.144e+07 Step=0
Tue Jun 11 22:21:58 2019 DDEV <0002> LMSDevice.cpp:226 [tid=140198298917632] Setting sample rate to 1.08333e+06 4
Tue Jun 11 22:21:59 2019 DDEV <0002> LMSDevice.cpp:232 [tid=140198298917632] Sample Rate: Host=1.08333e+06 RF=3.46667e+07
Tue Jun 11 22:21:59 2019 DMAIN <0000> LMSDevice.cpp:209 [tid=140198298917632] Antennas configured successfully
Tue Jun 11 22:21:59 2019 DMAIN <0000> Threads.cpp:116 [tid=140198299232000] Thread 140198299232000 (task 24985) set name: CtrlService0
Tue Jun 11 22:21:59 2019 DMAIN <0000> osmo-trx.cpp:526 [tid=140198298917632] -- Transceiver active with 1 channel(s)
Tue Jun 11 22:22:01 2019 DTRXCTRL <0001> Transceiver.cpp:717 [tid=140198299232000][chan=0] command is 'POWERON'
Tue Jun 11 22:22:01 2019 DMAIN <0000> Transceiver.cpp:244 [tid=140198299232000] Starting the transceiver
Tue Jun 11 22:22:01 2019 DMAIN <0000> radioInterface.cpp:177 [tid=140198299232000] Starting radio device
Tue Jun 11 22:22:01 2019 DDEV <0002> LMSDevice.cpp:260 [tid=140198299232000] starting LMS...
Tue Jun 11 22:22:01 2019 DDEV <0002> LMSDevice.cpp:409 [tid=140198299232000][chan=0] Setting TX gain to 73 dB
Segmentation fault (core dumped)

====================================================================================================================================================================================================================================================

and trying
https://osmocom.org/projects/cellular-infrastructure/wiki/OpenBSC_with_Asterisk

gives me the same result

========================================================================================================================== ==========================================================================================================================

LimeUtil --make
Make device
Device name: LimeSDR-USB
Expansion name: UNSUPPORTED
Firmware version: 4
Hardware version: 4
Protocol version: 1
Gateware version: 2
Gateware revision: 21
Gateware target: LimeSDR-USB
Serial number: 0x9060b00490d0f
Free connection... OK

========================================================================================================================== ==========================================================================================================================

LimeUtil --find * [LimeSDR-USB, media=USB 3.0, module=FX3, addr=1d50:6108, serial=0009060B00490D0F]

========================================================================================================================== ==========================================================================================================================
kimesdr@kimesdr-VirtualBox:~$ LimeUtil LimeUtil --info ######################################################
  1. LimeSuite information summary ######################################################

Version information:
Library version: v19.04.0-g4ab24db5
Build timestamp: 2019-06-11
Interface version: v2019.1.0
Binary interface: 19.04-1

System resources:
Installation root: /usr/local
User home directory: /home/kimesdr
App data directory: /home/kimesdr/.local/share/LimeSuite
Config directory: /home/kimesdr/.limesuite
Image search paths:
- /home/kimesdr/.local/share/LimeSuite/images
- /usr/local/share/LimeSuite/images

Supported connections: * FT601 * FX3 * PCIEXillybus

========================================================================================================================== ==========================================================================================================================
SoapySDRUtil --info ######################################################
  1. Soapy SDR -- the SDR abstraction library ## ######################################################

Lib Version: v0.8.0-g980c2c50
API Version: v0.8.0
ABI Version: v0.8
Install root: /usr/local
Search path: /usr/local/lib/SoapySDR/modules0.8
Module found: /usr/local/lib/SoapySDR/modules0.8/libLMS7Support.so (19.04.0-4ab24db)
Available factories... lime
Available converters...
- CF32 -> [CF32, CS16, CS8, CU16, CU8]
- CS16 -> [CF32, CS16, CS8, CU16, CU8]
- CS32 -> [CS32]
- CS8 -> [CF32, CS16, CS8, CU16, CU8]
- CU16 -> [CF32, CS16, CS8]
- CU8 -> [CF32, CS16, CS8]
- F32 -> [F32, S16, S8, U16, U8]
- S16 -> [F32, S16, S8, U16, U8]
- S32 -> [S32]
- S8 -> [F32, S16, S8, U16, U8]
- U16 -> [F32, S16, S8]
- U8 -> [F32, S16, S8]

========================================================================================================================== ==========================================================================================================================
SoapySDRUtil --find ######################################################
  1. Soapy SDR -- the SDR abstraction library ## ######################################################

Found device 0
addr = 1d50:6108
driver = lime
label = LimeSDR-USB [USB 3.0] 9060B00490D0F
media = USB 3.0
module = FX3
name = LimeSDR-USB
serial = 0009060B00490D0F

========================================================================================================================== ==========================================================================================================================
LimeUtil --update
Connected to [LimeSDR-USB [USB 3.0] 9060B00490D0F]
--2019-06-12 12:47:29-- https://downloads.myriadrf.org/project/limesuite/19.04/LimeSDR-USB_HW_1.4_r2.21.rbf
Resolving downloads.myriadrf.org (downloads.myriadrf.org)... 134.209.28.241, 2a03:b0c0:1:e0::3f9:a001
Connecting to downloads.myriadrf.org (downloads.myriadrf.org)|134.209.28.241|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 580050 (566K) [application/octet-stream]
Saving to: ‘/home/kimesdr/.local/share/LimeSuite/images/19.04/LimeSDR-USB_HW_1.4_r2.21.rbf’

/home/kimesdr/.loca 100%[===================>] 566,46K 2,55MB/s in 0,2s

2019-06-12 12:47:30 (2,55 MB/s) - ‘/home/kimesdr/.local/share/LimeSuite/images/19.04/LimeSDR-USB_HW_1.4_r2.21.rbf’ saved [580050/580050]

--2019-06-12 12:47:30-- https://downloads.myriadrf.org/project/limesuite/19.04/LimeSDR-USB_HW_1.4_r4.0.img
Resolving downloads.myriadrf.org (downloads.myriadrf.org)... 134.209.28.241, 2a03:b0c0:1:e0::3f9:a001
Connecting to downloads.myriadrf.org (downloads.myriadrf.org)|134.209.28.241|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 185976 (182K) [application/octet-stream]
Saving to: ‘/home/kimesdr/.local/share/LimeSuite/images/19.04/LimeSDR-USB_HW_1.4_r4.0.img’

/home/kimesdr/.loca 100%[===================>] 181,62K --.-KB/s in 0,1s

2019-06-12 12:47:30 (1,50 MB/s) - ‘/home/kimesdr/.local/share/LimeSuite/images/19.04/LimeSDR-USB_HW_1.4_r4.0.img’ saved [185976/185976]

Existing firmware is same as update (4)
Existing gateware is same as update (2.21)
Firmware and Gateware update is not required.

Programming update complete!

========================================================================================================================== ==========================================================================================================================

i have alle the ubuntu versions ready. all clean installs waiting for a hero with the solution or a good guide that will work. all i need is just that it runs.


Related issues

Related to OsmoTRX - Bug #4055: osmo-trx-lms: segfault on start with lime mini/usbResolved06/11/2019

History

#1 Updated by fixeria 13 days ago

  • Related to Bug #4055: osmo-trx-lms: segfault on start with lime mini/usb added

#2 Updated by fixeria 13 days ago

  • Project changed from Cellular Network Infrastructure to OsmoTRX
  • Subject changed from Osmocom_New_Splits_(BSC_MGW_HLR_MSC) to osmo-trx-lms: segfault on start LimeSDR-USB

i am running Vbox + extetions.

It's not a good idea to run performance critical applications in a virtualized environment (such as VirtualBox), please do not do that.

Also, please give us more information about the segfault:

$ gdb osmo-trx-lms
gdb$ r -C ~/osmobsc/limesdr.cfg
# Wait for segfault
gdb$ thread apply all bt

So we can see if it's the same problem as in #4055 or not.

#3 Updated by LimeSDR 13 days ago

fixeria wrote:

i am running Vbox + extetions.

It's not a good idea to run performance critical applications in a virtualized environment (such as VirtualBox), please do not do that.

Also, please give us more information about the segfault:

[...]

So we can see if it's the same problem as in #4055 or not.

===========================================================================================================

THANK YOU FOR YOUR FAST RESPONSE
i did want to test it virtual before going live that was the reason.

===========================================================================================================

sudo gdb osmo-trx-lms
[sudo] password for kimesdr: 
GNU gdb (Ubuntu 7.11.1-0ubuntu1~16.5) 7.11.1
Copyright (C) 2016 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.  Type "show copying" 
and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from osmo-trx-lms...done.
(gdb) r -C ~/osmobsc/limesdr.cfg
Starting program: /usr/local/bin/osmo-trx-lms -C ~/osmobsc/limesdr.cfg
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Info: SSE3 support compiled in and supported by CPU
Info: SSE4.1 support compiled in and supported by CPU
Wed Jun 12 13:50:31 2019 DLGLOBAL <0004> telnet_interface.c:104 Available via telnet 127.0.0.1 4237
Wed Jun 12 13:50:31 2019 DLCTRL <000b> control_if.c:911 CTRL at 127.0.0.1 4236
Wed Jun 12 13:50:31 2019 DMAIN <0000> osmo-trx.cpp:478 [tid=140737353784064] Config Settings
   Log Level............... 3
   Device args............. 
   TRX Base Port........... 5700
   TRX Address............. 127.0.0.1
   GSM BTS Address......... 127.0.0.1
   Channels................ 1
   Tx Samples-per-Symbol... 4
   Rx Samples-per-Symbol... 4
   EDGE support............ 0
   Extended RACH support... 0
   Reference............... 0
   C0 Filler Table......... 1
   Multi-Carrier........... 0
   Tuning offset........... 0
   RSSI to dBm offset...... 0
   Swap channels........... 0
   Tx Antennas............. 'BAND1'
   Rx Antennas............. 'LNAW'

Wed Jun 12 13:50:31 2019 DMAIN <0000> osmo-trx.cpp:434 [tid=140737353784064] Setting SCHED_RR priority 18
Wed Jun 12 13:50:31 2019 DDEV <0002> LMSDevice.cpp:52 [tid=140737353784064] creating LMS device...
Wed Jun 12 13:50:31 2019 DDEV <0002> LMSDevice.cpp:139 [tid=140737353784064] Opening LMS device..
[New Thread 0x7ffff429b700 (LWP 2678)]
[New Thread 0x7ffff3a9a700 (LWP 2679)]
[New Thread 0x7ffff3299700 (LWP 2680)]
Wed Jun 12 13:50:31 2019 DDEV <0002> LMSDevice.cpp:145 [tid=140737353784064] Devices found: 1
Wed Jun 12 13:50:31 2019 DDEV <0002> LMSDevice.cpp:155 [tid=140737353784064] Device [0]: LimeSDR-USB, media=USB 3.0, module=FX3, addr=1d50:6108, serial=0009060B00490D0F
Wed Jun 12 13:50:31 2019 DDEV <0002> LMSDevice.cpp:164 [tid=140737353784064] Using device[0]
Wed Jun 12 13:50:31 2019 DLMS <0003> LMSDevice.cpp:92 [tid=140737353784064] Reference clock 30.72 MHz
Wed Jun 12 13:50:31 2019 DDEV <0002> LMSDevice.cpp:190 [tid=140737353784064] Init LMS device
Wed Jun 12 13:50:32 2019 DDEV <0002> LMSDevice.cpp:203 [tid=140737353784064] Setting Internal clock reference
Wed Jun 12 13:50:32 2019 DLMS <0003> LMSDevice.cpp:92 [tid=140737353784064] Disabling external reference clock
Wed Jun 12 13:50:32 2019 DDEV <0002> LMSDevice.cpp:97 [tid=140737353784064] Sample Rate: Min=100000 Max=6.144e+07 Step=0
Wed Jun 12 13:50:32 2019 DDEV <0002> LMSDevice.cpp:226 [tid=140737353784064] Setting sample rate to 1.08333e+06 4
Wed Jun 12 13:50:32 2019 DDEV <0002> LMSDevice.cpp:232 [tid=140737353784064] Sample Rate: Host=1.08333e+06 RF=3.46667e+07
Wed Jun 12 13:50:32 2019 DMAIN <0000> LMSDevice.cpp:209 [tid=140737353784064] Antennas configured successfully
[New Thread 0x7ffff7ff6700 (LWP 2681)]
Wed Jun 12 13:50:32 2019 DMAIN <0000> Threads.cpp:116 [tid=140737354098432] Thread 140737354098432 (task 2681) set name: CtrlService0
Wed Jun 12 13:50:32 2019 DMAIN <0000> osmo-trx.cpp:526 [tid=140737353784064] -- Transceiver active with 1 channel(s)
Wed Jun 12 13:50:34 2019 DTRXCTRL <0001> Transceiver.cpp:717 [tid=140737354098432][chan=0] command is 'POWERON'
Wed Jun 12 13:50:34 2019 DMAIN <0000> Transceiver.cpp:244 [tid=140737354098432] Starting the transceiver
Wed Jun 12 13:50:34 2019 DMAIN <0000> radioInterface.cpp:177 [tid=140737354098432] Starting radio device
Wed Jun 12 13:50:34 2019 DDEV <0002> LMSDevice.cpp:260 [tid=140737354098432] starting LMS...
Wed Jun 12 13:50:34 2019 DDEV <0002> LMSDevice.cpp:409 [tid=140737354098432][chan=0] Setting TX gain to 73 dB

Thread 5 "CtrlService0" received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7ffff7ff6700 (LWP 2681)]
0x00007ffff605d528 in _nl_lookup (item=65536, category=1, 
    l=0x7ffff63d2420 <_nl_global_locale>)
    at ../include/../locale/localeinfo.h:306
306    ../include/../locale/localeinfo.h: No such file or directory.
(gdb) thread apply all bt

Thread 5 (Thread 0x7ffff7ff6700 (LWP 2681)):
#0  0x00007ffff605d528 in _nl_lookup (item=65536, category=1, 
    l=0x7ffff63d2420 <_nl_global_locale>)
    at ../include/../locale/localeinfo.h:306
#1  __GI___printf_fp_l (fp=fp@entry=0x7ffff7ff0660, 
    loc=0x7ffff63d2420 <_nl_global_locale>, info=info@entry=0x7ffff7ff01e0, 
    args=args@entry=0x7ffff7ff01c0) at printf_fp.c:266
#2  0x00007ffff605fbd9 in ___printf_fp (fp=fp@entry=0x7ffff7ff0660, 
    info=info@entry=0x7ffff7ff01e0, args=args@entry=0x7ffff7ff01c0)
    at printf_fp.c:1257
#3  0x00007ffff605c0b9 in _IO_vfprintf_internal (s=s@entry=0x7ffff7ff0660, 
    format=<optimized out>, 
    format@entry=0x7ffff6d18ddf "VCO %.2f MHz, RefClk %.2f MHz", 
    ap=ap@entry=0x7ffff7ff1800) at vfprintf.c:1631
#4  0x00007ffff6123896 in ___vsnprintf_chk (
    s=0x7ffff7ff07d0 "VCO 75, FRAC 0, DIV_OUTCH_CGEN 18", 
    maxlen=<optimized out>, flags=1, slen=<optimized out>, 
    format=0x7ffff6d18ddf "VCO %.2f MHz, RefClk %.2f MHz", args=0x7ffff7ff1800)
    at vsnprintf_chk.c:63
#5  0x00007ffff6ca50bb in lime::log(lime::LogLevel, char const*, __va_list_tag*) () from /usr/local/lib/libLimeSuite.so.19.04-1
#6  0x00007ffff6cb4719 in lime::debug ()
---Type <return> to continue, or q <return> to quit---
   from /usr/local/lib/libLimeSuite.so.19.04-1
#7  0x00007ffff6cbe03b in lime::LMS7002M::SetFrequencyCGEN(double, bool, lime::LMS7002M::CGEN_details*) () from /usr/local/lib/libLimeSuite.so.19.04-1
#8  0x00007ffff6cc9fba in lime::LMS7002M::CalibrateTxGainSetup() ()
   from /usr/local/lib/libLimeSuite.so.19.04-1
#9  0x00007ffff6cca18b in lime::LMS7002M::CalibrateTxGain(float, float*) ()
   from /usr/local/lib/libLimeSuite.so.19.04-1
#10 0x00007ffff6cb7b0e in lime::LMS7002M::SetTBBIAMP_dB(double) ()
   from /usr/local/lib/libLimeSuite.so.19.04-1
#11 0x00007ffff6ce6e6f in lime::LMS7_Device::SetGain(bool, unsigned int, double, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&) () from /usr/local/lib/libLimeSuite.so.19.04-1
#12 0x00007ffff6ce0796 in LMS_SetGaindB ()
   from /usr/local/lib/libLimeSuite.so.19.04-1
#13 0x000000000040d419 in LMSDevice::setTxGain (this=0x70c500, dB=73, chan=0)
    at LMSDevice.cpp:411
#14 0x000000000040fc20 in LMSDevice::start (this=0x70c500) at LMSDevice.cpp:273
#15 0x000000000041936b in RadioInterface::start (this=0x7123f0)
    at radioInterface.cpp:183
#16 0x000000000041efbb in Transceiver::start (this=this@entry=0x7125f0)
    at Transceiver.cpp:251
#17 0x0000000000423dc5 in Transceiver::driveControl (this=this@entry=0x7125f0, 
    chan=chan@entry=0) at Transceiver.cpp:723
---Type <return> to continue, or q <return> to quit---
#18 0x0000000000424a5b in ControlServiceLoopAdapter (chan=<optimized out>)
    at Transceiver.cpp:1098
#19 0x00007ffff7bc16ba in start_thread (arg=0x7ffff7ff6700)
    at pthread_create.c:333
#20 0x00007ffff611441d in clone ()
    at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109

Thread 4 (Thread 0x7ffff3299700 (LWP 2680)):
#0  0x00007ffff610874d in poll () at ../sysdeps/unix/syscall-template.S:84
#1  0x00007ffff5991bc5 in ?? () from /lib/x86_64-linux-gnu/libusb-1.0.so.0
#2  0x00007ffff5992b53 in libusb_handle_events_timeout_completed ()
   from /lib/x86_64-linux-gnu/libusb-1.0.so.0
#3  0x00007ffff6d0b2f6 in lime::ConnectionFT601Entry::handle_libusb_events() ()
   from /usr/local/lib/libLimeSuite.so.19.04-1
#4  0x00007ffff69aec80 in ?? () from /usr/lib/x86_64-linux-gnu/libstdc++.so.6
#5  0x00007ffff7bc16ba in start_thread (arg=0x7ffff3299700)
    at pthread_create.c:333
#6  0x00007ffff611441d in clone ()
    at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109

Thread 3 (Thread 0x7ffff3a9a700 (LWP 2679)):
#0  0x00007ffff610874d in poll () at ../sysdeps/unix/syscall-template.S:84
#1  0x00007ffff5991bc5 in ?? () from /lib/x86_64-linux-gnu/libusb-1.0.so.0
---Type <return> to continue, or q <return> to quit---
#2  0x00007ffff5992b53 in libusb_handle_events_timeout_completed ()
   from /lib/x86_64-linux-gnu/libusb-1.0.so.0
#3  0x00007ffff6d00e76 in lime::ConnectionFX3Entry::handle_libusb_events() ()
   from /usr/local/lib/libLimeSuite.so.19.04-1
#4  0x00007ffff69aec80 in ?? () from /usr/lib/x86_64-linux-gnu/libstdc++.so.6
#5  0x00007ffff7bc16ba in start_thread (arg=0x7ffff3a9a700)
    at pthread_create.c:333
#6  0x00007ffff611441d in clone ()
    at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109

Thread 2 (Thread 0x7ffff429b700 (LWP 2678)):
#0  0x00007ffff610874d in poll () at ../sysdeps/unix/syscall-template.S:84
#1  0x00007ffff599864c in ?? () from /lib/x86_64-linux-gnu/libusb-1.0.so.0
#2  0x00007ffff7bc16ba in start_thread (arg=0x7ffff429b700)
    at pthread_create.c:333
#3  0x00007ffff611441d in clone ()
    at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109

Thread 1 (Thread 0x7ffff7fa9b00 (LWP 2674)):
#0  0x00007ffff610a5d3 in select () at ../sysdeps/unix/syscall-template.S:84
#1  0x00007ffff6f4de7b in osmo_select_main (polling=polling@entry=0)
    at select.c:255
#2  0x00000000004079b7 in main (argc=<optimized out>, argv=<optimized out>)
---Type <return> to continue, or q <return> to quit---
    at osmo-trx.cpp:637

#4 Updated by pespin 8 days ago

  • Status changed from New to Resolved
  • Assignee set to pespin
  • % Done changed from 0 to 100

Closing as resolved, it's a duplicate of #4055

Also available in: Atom PDF

Add picture from clipboard (Maximum size: 48.8 MB)