place 3 fiducials
The PCB lacks fiducials. Please add three of simple round-shaped ones of 1 or 1,5mm, free of solder stop and surrounded by a gap w/o copper nor solder stop. Place them in an orthogonal arrangement, close to the mounting holes. Their position shall be reflected in the p'n'p data as well.
#1 Updated by cibomahto about 1 month ago
I put them a little further away from the mounting holes than the reference. Of course not a problem if you have a more specific location for them.
#3 Updated by mschramm about 1 month ago
- Assignee deleted (
- % Done changed from 0 to 50
type, position + size are fine, but I forgot to specify "without solder"; sorry for that late spec and now correction.Just seeing, that there are other spots which now have openings in the solder stencil:
- the four big GND rounded squares, and
- six pads of the two SMA on top layer.
So let's have those ten pads and the three fiducials w/o solder paste.