Project

General

Profile

Bug #1898

Updated by zecke almost 3 years ago

So handover being detected on TS=0, SS=0... which is unlikely to be the right channel.. Need input validation and checking if the channel is allocated? But verify it.. not sure why it detects it like that.. Happens frequently at the 33C3

<pre>
<0006> l1_if.c:700 SACCH for pchan 9?
<0006> l1_if.c:700 SACCH for pchan 9?
<0006> l1_if.c:700 SACCH for pchan 9?
<0006> l1_if.c:700 SACCH for pchan 9?
<0006> l1_if.c:700 SACCH for pchan 9?
<0006> l1_if.c:700 SACCH for pchan 9?
<0006> l1_if.c:700 SACCH for pchan 9?
<0006> l1_if.c:700 SACCH for pchan 9?
<0006> l1_if.c:700 SACCH for pchan 9?
<0006> l1_if.c:700 SACCH for pchan 9?
<0006> l1_if.c:700 SACCH for pchan 9?
<0006> l1_if.c:700 SACCH for pchan 9?
<0006> l1_if.c:700 SACCH for pchan 9?
<0006> l1_if.c:700 SACCH for pchan 9?
<0006> l1_if.c:700 SACCH for pchan 9?
<000a> handover.c:111 (bts=0,trx=0,ts=0,ss=0) RACH on dedicated channel received with TA=0
<0007> l1sap.c:1205 modifying channel chan_nr=0x20 trx=0
<000a> oml.c:1852 (bts=0,trx=0,ts=0,ss=0) modifying channel for handover
<0006> oml.c:1077 (bts=0,trx=0,ts=0,ss=0) MPH-ACTIVATE.req (hL2=0x000000bb, SDCCH TxDL)
<0007> l1_if.c:166 Tx L1 prim MPH-ACTIVATE.req
<0000> rsl.c:578 Sending HANDOver DETect

Program received signal SIGSEGV, Segmentation fault.
rslms_rx_rll_udata_req (msg=msg@entry=0xc0748, dl=dl@entry=0xb6fc14b0) at lapdm.c:855
855 lapdm.c: No such file or directory.
(gdb) bt
#0 rslms_rx_rll_udata_req (msg=msg@entry=0xc0748, dl=dl@entry=0xb6fc14b0) at lapdm.c:855
#1 0x4fcacb00 in rslms_rx_rll (lc=0xb6fc133c, msg=0xc0748) at lapdm.c:1154
#2 lapdm_rslms_recvmsg (msg=msg@entry=0xc0748, lc=lc@entry=0xb6fc1294) at lapdm.c:1223
#3 0x000279d4 in ho_tx_phys_info (lchan=lchan@entry=0xb6fc11ec) at handover.c:61
#4 0x00027cbc in handover_rach (lchan=0xb6fc11ec, ra=<optimized out>, acc_delay=acc_delay@entry=0 '\000') at handover.c:131
#5 0x0002a680 in l1sap_handover_rach (l1sap=<optimized out>, rach_ind=<optimized out>, rach_ind=<optimized out>,
rach_ind=<optimized out>, trx=0xb6fbd038) at l1sap.c:659
#6 l1sap_ph_rach_ind (rach_ind=0xbf4fc, l1sap=0xbf4ec, trx=0xb6fbd038) at l1sap.c:974
#7 l1sap_up (trx=trx@entry=0xb6fbd038, l1sap=l1sap@entry=0xbf4ec) at l1sap.c:1022
#8 0x0000d690 in handle_ph_ra_ind (l1p_msg=0xbf428, ra_ind=<optimized out>, fl1=0xbf428) at l1_if.c:1064
#9 l1if_handle_ind (fl1=<optimized out>, msg=msg@entry=0xbf428) at l1_if.c:1090
#10 0x0000dfc8 in l1if_handle_l1prim (wq=<optimized out>, fl1h=<optimized out>, msg=msg@entry=0xbf428) at l1_if.c:1144
#11 0x00017e48 in read_dispatch_one (queue=<optimized out>, msg=0xbf428, fl1h=<optimized out>) at l1_transp_hw.c:190
#12 l1if_fd_cb (ofd=0xb86d0, what=<optimized out>) at l1_transp_hw.c:224
#13 0x4fcd6330 in osmo_fd_disp_fds (_eset=0xbefffb48, _wset=0xbefffac8, _rset=0xbefffa48) at select.c:149
#14 osmo_select_main (polling=polling@entry=0) at select.c:189
#15 0x0002bf84 in bts_main (argc=<optimized out>, argv=<optimized out>) at main.c:349
#16 0x4fa61684 in __libc_start_main (main=0xbefffd84, argc=1337463808, argv=0x4fa61684 <__libc_start_main+276>,
init=<optimized out>, fini=0x2ec70 <__libc_csu_fini>, rtld_fini=0x4fa27dc4 <_dl_fini>, stack_end=0xbefffd84) at libc-start.c:269
#17 0x0000b8a4 in _start () at ../ports/sysdeps/arm/start.S:124
(gdb) frame 5
#5 0x0002a680 in l1sap_handover_rach (l1sap=<optimized out>, rach_ind=<optimized out>, rach_ind=<optimized out>,
rach_ind=<optimized out>, trx=0xb6fbd038) at l1sap.c:659
659 l1sap.c: No such file or directory.
#17 0x0000b8a4 in _start () at ../ports/sysdeps/arm/start.S:124
(gdb) frame 5
#5 0x0002a680 in l1sap_handover_rach (l1sap=<optimized out>, rach_ind=<optimized out>, rach_ind=<optimized out>,
rach_ind=<optimized out>, trx=0xb6fbd038) at l1sap.c:659
659 l1sap.c: No such file or directory.
(gdb) p lc
No symbol "lc" in current context.
(gdb) p lc^CQuit
(gdb) p *lchan
value has been optimized out
(gdb) p *rach_ind
value has been optimized out
(gdb) p rach_ind->chan_nr
value has been optimized out
(gdb) frame 6
#6 l1sap_ph_rach_ind (rach_ind=0xbf4fc, l1sap=0xbf4ec, trx=0xb6fbd038) at l1sap.c:974
974 in l1sap.c
(gdb) p *rach_ind
$1 = {chan_nr = 64 '@', ra = 0, acc_delay = 0 '\000', fn = 2107, is_11bit = 0 '\000', burst_type = GSM_L1_BURST_TYPE_ACCESS_0}
(gdb) frame 3
#3 0x000279d4 in ho_tx_phys_info (lchan=lchan@entry=0xb6fc11ec) at handover.c:61
61 handover.c: No such file or directory.
(gdb) p *lchan
$2 = {ts = 0xb6fc08f8, nr = 0 '\000', type = GSM_LCHAN_SDCCH, rsl_cmode = 0, tch_mode = GSM48_CMODE_SIGN, csd_mode = LCHAN_CSD_M_NT,
state = LCHAN_S_NONE, broken_reason = 0x0, bs_power = 0 '\000', ms_power = 0 '\000', encr = {alg_id = 0 '\000',
key_len = 0 '\000', key = '\000' <repeats 15 times>}, mr_ms_lv = "\000\000\000\000\000\000",
mr_bts_lv = "\000\000\000\000\000\000", sapis = "\000\000\000\000\000\000\000", sacch_deact = 0, abis_ip = {bound_ip = 0,
connect_ip = 0, bound_port = 0, connect_port = 0, conn_id = 0, rtp_payload = 0 '\000', rtp_payload2 = 0 '\000',
speech_mode = 0 '\000', rtp_socket = 0x0}, rqd_ta = 0 '\000', name = 0x6b778 "(bts=0,trx=0,ts=0,ss=0)", sapi_cmds = {
next = 0xc0150, prev = 0xc0240}, sapis_dl = '\000' <repeats 22 times>, sapis_ul = '\000' <repeats 22 times>, lapdm_ch = {list = {
next = 0x0, prev = 0x0}, name = 0x0, lapdm_acch = {datalink = {{dl = {send_dlsap = 0x0, send_ph_data_req = 0x0,
update_pending_frames = 0x0, cr = {loc2rem = {cmd = 0 '\000', resp = 0 '\000'}, rem2loc = {cmd = 0 '\000',
resp = 0 '\000'}}, mode = LAPD_MODE_USER, use_sabme = 0, reestablish = 0, n200 = 0, n200_est_rel = 0, lctx = {
dl = 0x0, n201 = 0, cr = 0 '\000', sapi = 0 '\000', tei = 0 '\000', lpd = 0 '\000', format = 0 '\000', p_f = 0 '\000',
n_send = 0 '\000', n_recv = 0 '\000', s_u = 0 '\000', length = 0, more = 0 '\000'}, maxf = 0, k = 0 '\000',
v_range = 0 '\000', v_send = 0 '\000', v_ack = 0 '\000', v_recv = 0 '\000', state = 0, seq_err_cond = 0,
own_busy = 0 '\000', peer_busy = 0 '\000', t200_sec = 0, t200_usec = 0, t203_sec = 0, t203_usec = 0, t200 = {node = {
rb_parent_color = 0, rb_right = 0x0, rb_left = 0x0}, list = {next = 0x0, prev = 0x0}, timeout = {tv_sec = 0,
tv_usec = 0}, active = 0, cb = 0x0, data = 0x0}, t203 = {node = {rb_parent_color = 0, rb_right = 0x0,
rb_left = 0x0}, list = {next = 0x0, prev = 0x0}, timeout = {tv_sec = 0, tv_usec = 0}, active = 0, cb = 0x0,
data = 0x0}, retrans_ctr = 0 '\000', tx_queue = {next = 0x0, prev = 0x0}, send_queue = {next = 0x0, prev = 0x0},
send_buffer = 0x0, send_out = 0, tx_hist = 0x0, range_hist = 0 '\000', rcv_buffer = 0x0, cont_res = 0x0}, mctx = {
dl = 0x0, lapdm_fmt = 0, chan_nr = 0 '\000', link_id = 0 '\000', ta_ind = 0 '\000', tx_power_ind = 0 '\000'},
entity = 0x0}, {dl = {send_dlsap = 0x0, send_ph_data_req = 0x0, update_pending_frames = 0x0, cr = {loc2rem = {
cmd = 0 '\000', resp = 0 '\000'}, rem2loc = {cmd = 0 '\000', resp = 0 '\000'}}, mode = LAPD_MODE_USER,
use_sabme = 0, reestablish = 0, n200 = 0, n200_est_rel = 0, lctx = {dl = 0x0, n201 = 0, cr = 0 '\000', sapi = 0 '\000',
tei = 0 '\000', lpd = 0 '\000', format = 0 '\000', p_f = 0 '\000', n_send = 0 '\000', n_recv = 0 '\000',
s_u = 0 '\000', length = 0, more = 0 '\000'}, maxf = 0, k = 0 '\000', v_range = 0 '\000', v_send = 0 '\000',
v_ack = 0 '\000', v_recv = 0 '\000', state = 0, seq_err_cond = 0, own_busy = 0 '\000', peer_busy = 0 '\000',
t200_sec = 0, t200_usec = 0, t203_sec = 0, t203_usec = 0, t200 = {node = {rb_parent_color = 0, rb_right = 0x0,
rb_left = 0x0}, list = {next = 0x0, prev = 0x0}, timeout = {tv_sec = 0, tv_usec = 0}, active = 0, cb = 0x0,
data = 0x0}, t203 = {node = {rb_parent_color = 0, rb_right = 0x0, rb_left = 0x0}, list = {next = 0x0, prev = 0x0},
timeout = {tv_sec = 0, tv_usec = 0}, active = 0, cb = 0x0, data = 0x0}, retrans_ctr = 0 '\000', tx_queue = {
next = 0x0, prev = 0x0}, send_queue = {next = 0x0, prev = 0x0}, send_buffer = 0x0, send_out = 0, tx_hist = 0x0,
range_hist = 0 '\000', rcv_buffer = 0x0, cont_res = 0x0}, mctx = {dl = 0x0, lapdm_fmt = 0, chan_nr = 0 '\000',
link_id = 0 '\000', ta_ind = 0 '\000', tx_power_ind = 0 '\000'}, entity = 0x0}}, last_tx_dequeue = 0, tx_pending = 0,
mode = LAPDM_MODE_MS, flags = 0, l1_ctx = 0x0, l3_ctx = 0x0, l1_prim_cb = 0x0, l3_cb = 0x0, lapdm_ch = 0x0, ta = 0 '\000',
tx_power = 0 '\000'}, lapdm_dcch = {datalink = {{dl = {send_dlsap = 0x0, send_ph_data_req = 0x0, update_pending_frames = 0x0,
cr = {loc2rem = {cmd = 0 '\000', resp = 0 '\000'}, rem2loc = {cmd = 0 '\000', resp = 0 '\000'}}, mode = LAPD_MODE_USER,
use_sabme = 0, reestablish = 0, n200 = 0, n200_est_rel = 0, lctx = {dl = 0x0, n201 = 0, cr = 0 '\000', sapi = 0 '\000',
tei = 0 '\000', lpd = 0 '\000', format = 0 '\000', p_f = 0 '\000', n_send = 0 '\000', n_recv = 0 '\000',
s_u = 0 '\000', length = 0, more = 0 '\000'}, maxf = 0, k = 0 '\000', v_range = 0 '\000', v_send = 0 '\000',
v_ack = 0 '\000', v_recv = 0 '\000', state = 0, seq_err_cond = 0, own_busy = 0 '\000', peer_busy = 0 '\000',
t200_sec = 0, t200_usec = 0, t203_sec = 0, t203_usec = 0, t200 = {node = {rb_parent_color = 0, rb_right = 0x0,
rb_left = 0x0}, list = {next = 0x0, prev = 0x0}, timeout = {tv_sec = 0, tv_usec = 0}, active = 0, cb = 0x0,
data = 0x0}, t203 = {node = {rb_parent_color = 0, rb_right = 0x0, rb_left = 0x0}, list = {next = 0x0, prev = 0x0},
timeout = {tv_sec = 0, tv_usec = 0}, active = 0, cb = 0x0, data = 0x0}, retrans_ctr = 0 '\000', tx_queue = {
next = 0x0, prev = 0x0}, send_queue = {next = 0x0, prev = 0x0}, send_buffer = 0x0, send_out = 0, tx_hist = 0x0,
range_hist = 0 '\000', rcv_buffer = 0x0, cont_res = 0x0}, mctx = {dl = 0x0, lapdm_fmt = 0, chan_nr = 0 '\000',
link_id = 0 '\000', ta_ind = 0 '\000', tx_power_ind = 0 '\000'}, entity = 0x0}, {dl = {send_dlsap = 0x0,
send_ph_data_req = 0x0, update_pending_frames = 0x0, cr = {loc2rem = {cmd = 0 '\000', resp = 0 '\000'}, rem2loc = {
cmd = 0 '\000', resp = 0 '\000'}}, mode = LAPD_MODE_USER, use_sabme = 0, reestablish = 0, n200 = 0,
n200_est_rel = 0, lctx = {dl = 0x0, n201 = 0, cr = 0 '\000', sapi = 0 '\000', tei = 0 '\000', lpd = 0 '\000',
format = 0 '\000', p_f = 0 '\000', n_send = 0 '\000', n_recv = 0 '\000', s_u = 0 '\000', length = 0, more = 0 '\000'},
maxf = 0, k = 0 '\000', v_range = 0 '\000', v_send = 0 '\000', v_ack = 0 '\000', v_recv = 0 '\000', state = 0,
seq_err_cond = 0, own_busy = 0 '\000', peer_busy = 0 '\000', t200_sec = 0, t200_usec = 0, t203_sec = 0, t203_usec = 0,
t200 = {node = {rb_parent_color = 0, rb_right = 0x0, rb_left = 0x0}, list = {next = 0x0, prev = 0x0}, timeout = {
tv_sec = 0, tv_usec = 0}, active = 0, cb = 0x0, data = 0x0}, t203 = {node = {rb_parent_color = 0, rb_right = 0x0,
rb_left = 0x0}, list = {next = 0x0, prev = 0x0}, timeout = {tv_sec = 0, tv_usec = 0}, active = 0, cb = 0x0,
data = 0x0}, retrans_ctr = 0 '\000', tx_queue = {next = 0x0, prev = 0x0}, send_queue = {next = 0x0, prev = 0x0},
send_buffer = 0x0, send_out = 0, tx_hist = 0x0, range_hist = 0 '\000', rcv_buffer = 0x0, cont_res = 0x0}, mctx = {
dl = 0x0, lapdm_fmt = 0, chan_nr = 0 '\000', link_id = 0 '\000', ta_ind = 0 '\000', tx_power_ind = 0 '\000'},
entity = 0x0}}, last_tx_dequeue = 0, tx_pending = 0, mode = LAPDM_MODE_MS, flags = 0, l1_ctx = 0x0, l3_ctx = 0x0,
l1_prim_cb = 0x0, l3_cb = 0x0, lapdm_ch = 0x0, ta = 0 '\000', tx_power = 0 '\000'}}, dl_tch_queue = {next = 0xb6fc16c0,
prev = 0xb6fc16c0}, si = {valid = 0, last = 0, buf = {'\000' <repeats 22 times> <repeats 24 times>}}, meas = {flags = 0 '\000',
res_nr = 0 '\000', bts_tx_pwr = 0 '\000', num_ul_meas = 0 '\000', uplink = {{ber10k = 0, ta_offs_qbits = 0, c_i = 0,
is_sub = 0 '\000', inv_rssi = 0 '\000'} <repeats 104 times>}, l1_info = "\000", ul_res = {full = {rx_lev = 0 '\000',
rx_qual = 0 '\000'}, sub = {rx_lev = 0 '\000', rx_qual = 0 '\000'}}}, tch = {amr_mr = {gsm48_ie = "\000", ms_mode = {{
mode = 0 '\000', threshold = 0 '\000', hysteresis = 0 '\000'}, {mode = 0 '\000', threshold = 0 '\000',
hysteresis = 0 '\000'}, {mode = 0 '\000', threshold = 0 '\000', hysteresis = 0 '\000'}, {mode = 0 '\000',
threshold = 0 '\000', hysteresis = 0 '\000'}}, bts_mode = {{mode = 0 '\000', threshold = 0 '\000', hysteresis = 0 '\000'},
{mode = 0 '\000', threshold = 0 '\000', hysteresis = 0 '\000'}, {mode = 0 '\000', threshold = 0 '\000',
hysteresis = 0 '\000'}, {mode = 0 '\000', threshold = 0 '\000', hysteresis = 0 '\000'}}, num_modes = 0 '\000'}, dtx = {
dl_amr_fsm = 0x0, cache = '\000' <repeats 19 times>, facch = '\000' <repeats 22 times>, len = 0 '\000', fn = 0,
is_update = false, ul_sid = false, dl_active = false}, last_cmr = 0 '\000', last_fn = 0}, ciph_state = 0 '\000',
ciph_ns = 0 '\000', loopback = 0 '\000', ho = {active = 2 '\002', ref = 0 '\000', t3105 = {node = {rb_parent_color = 0,
rb_right = 0x0, rb_left = 0x0}, list = {next = 0x0, prev = 0x0}, timeout = {tv_sec = 0, tv_usec = 0}, active = 0, cb = 0x0,
data = 0x0}, phys_info_count = 1}, s = 0, rel_act_kind = 0, rtp_tx_marker = false, ms_power_ctrl = {current = 0 '\000',
fixed = 0 '\000'}}
(gdb) frame 4
#4 0x00027cbc in handover_rach (lchan=0xb6fc11ec, ra=<optimized out>, acc_delay=acc_delay@entry=0 '\000') at handover.c:131
131 in handover.c
(gdb) p ra
$3 = <optimized out>
(gdb)
$4 = <optimized out>
(gdb) c
Continuing.

Program terminated with signal SIGSEGV, Segmentation fault.
The program no longer exists.
(gdb)
</pre>

Back

Add picture from clipboard (Maximum size: 48.8 MB)