Project

General

Profile

OsmocomBB Firmware » History » Version 3

nion, 02/19/2016 10:48 PM

1 1 prom
2 1 prom
[[PageOutline]]
3 1 prom
4 2 nion
= Background =
5 2 nion
The OsmocomBB source code comes with several applications for various purposes.
6 2 nion
Those applications can be devided into two separate classes, applications:
7 2 nion
 * running on the baseband chip of the phone
8 2 nion
 * running on a PC, communicating with the baseband firmware over serial
9 1 prom
10 2 nion
Applications running on the PC can further be partitioned into:
11 2 nion
 * Firmware management software (loading, flashing, ...)
12 3 nion
 * GSM Layer 2/3 applications
13 1 prom
14 2 nion
The following will provide you a rough overview of the most commonly used software pieces.
15 1 prom
16 1 prom
17 1 prom
18 2 nion
= Baseband firmware =
19 2 nion
20 2 nion
Binary location: src/target/firmware/board/*/*.bin
21 2 nion
Source locations: src/target/firmware/, particularly apps and layer1
22 2 nion
23 1 prom
== layer1 ==
24 1 prom
25 1 prom
A simple GSM layer 1 proxy, communicating over the [wiki:L1A_L23_Interface].
26 1 prom
27 1 prom
This allows you to run a full-blown GSM implementation on your host machine, communicating through the phones radio interface.
28 1 prom
29 1 prom
== l1test ==
30 1 prom
31 1 prom
Layer 1 development application.
32 1 prom
33 1 prom
This application does what layer1 does, but automatically tunes to the strongest ARFCN it can find.
34 1 prom
35 1 prom
It can be used for stand-alone-testing of the phones radio.
36 1 prom
37 1 prom
== loader ==
38 1 prom
39 1 prom
Our [wiki:Bootloader], available in various build configurations.
40 1 prom
41 1 prom
== compal_dsp_dump ==
42 1 prom
43 1 prom
Application for dumping the contents of the DSP in the Calypso chip.
44 1 prom
45 1 prom
== compal_dumper ==
46 1 prom
47 1 prom
The old compal device dumper. Use [wiki:Bootloader] instead once it is available.
48 1 prom
49 1 prom
== hello_world ==
50 1 prom
51 1 prom
The initial obligatory "Hello, world!" application.
52 1 prom
53 1 prom
Currently, this does more than say hello. Intended as a template for new applications.
54 2 nion
55 2 nion
== rssi ==
56 2 nion
57 2 nion
The [blog:rssi-firmware] can be used to monitor the received signal indication (RSSI) of ARFCNs or the entire spectrum.
58 2 nion
59 2 nion
60 2 nion
61 2 nion
= Firmware management software =
62 2 nion
Location (source and binary): src/host/osmocon
63 2 nion
64 2 nion
== osmocon ==
65 2 nion
[wiki:osmocon] is a console tool for interfacing our baseband firmware on the phone with applications on the host PC.
66 2 nion
It is responsible for downloading a baseband firmware or bootloader into the phone and relay communication between Layer 3 applications and baseband firmwares over serial.
67 2 nion
68 2 nion
== osmoload ==
69 2 nion
[wiki:osmoload] is used to write, dump and examine flash memory of supported phones
70 2 nion
You will need this program for example if you intent [wiki:flashing] an application to the phone (the software is usually loaded into RAM).
71 1 prom
72 3 nion
== calypso_pll == 
73 3 nion
The [wiki:calypso_pll] tool can be used to calculate Calypso DPLL multiplier+divider.
74 1 prom
75 3 nion
== rita_pll ==
76 3 nion
The [wiki:rita_pll] tool can be used to calculate the Rita PLL multiplier/divider.
77 1 prom
78 3 nion
79 3 nion
= GSM Layer 2/3 applications = 
80 2 nion
Location (source and binary): src/host/layer23/*
81 2 nion
82 3 nion
Layer 3 applications implement various functionality based on GSM Layer 3 in combination with Layer 2 (LAPDm).
83 2 nion
84 2 nion
== mobile ==
85 2 nion
[wiki:mobile] is the most sophisticated OsmocomBB application so far.
86 2 nion
It implements most of the behavior of a regular GSM telephone, but is extended in many ways with features interesting to researchers.
87 2 nion
88 2 nion
== cell_log ==
89 2 nion
The cell_log application scans through valid available carrier frequencies, attempts to sync to them and dumps information gathered from the BCCH.
90 2 nion
It is usually used to create a list of used ARFCNs and information such as their reception levels, MNC, MCC, and System Information.
91 2 nion
92 2 nion
== ccch_scan ==
93 2 nion
The ccch_scan application can sync to a carrier ARFCN and logs power measurement and CCCH information (paging requests and Immediate Assignments).
94 2 nion
95 2 nion
== bcch_scan ==
96 2 nion
bcch_scan is basically a predecessor of cell_log and logs information as observed on the BCCH (System Information).
97 2 nion
98 2 nion
== cbch_sniff ==
99 2 nion
cbch_sniff dumps cell broadcast channel information such as, e.g., GPS location of the cell.
Add picture from clipboard (Maximum size: 48.8 MB)