Project

General

Profile

Accelerate3g5 -- unicornteam » History » Revision 17

Revision 16 (Alin, 04/11/2017 09:36 AM) → Revision 17/24 (Alin, 04/11/2017 09:41 AM)

h1. Accelerate3g5 -- unicornteam 

 Journal 

 2017/03/15 -- Received the package of nano3G. 

 !C7aK_6IVAAALB5Z.jpg! 


 2017/04/10 

 h2. Building from source 
 * PC:Ubuntu16.04 
 * HardWare:ip.access nano3G 
 * SoftWare:Osmocom  

 !C7aK_5_U0AAN1Co.jpg! 

 h3.    1.1 Install cross-compilation environment 

 <pre> 
 sudo apt-get update 

 sudo apt-get install libtool shtool autoconf git-core pkg-config make gcc build-essential libgmp3-dev libmpfr-dev libx11-6 libx11-dev texinfo flex bison libncurses5 libncurses5-dbg libusb-0.1-4 libpcsclite1 libccid pcscd libncurses5-dev libncursesw5 libncursesw5-dbg libncursesw5-dev zlibc zlib1g-dev libmpfr4 libmpc-dev libpcsclite-dev  
 sudo ldconfig 

 mkdir osm 
 cd osm 
 mkdir build install src 
 wget http://bb.osmocom.org/trac/raw-attachment/wiki/GnuArmToolchain/gnu-arm-build.3.sh 
 cd src 
 wget http://ftp.gnu.org/gnu/gcc/gcc-4.8.2/gcc-4.8.2.tar.bz2 
 wget http://ftp.gnu.org/gnu/binutils/binutils-2.21.1a.tar.bz2 
 wget ftp://sources.redhat.com/pub/newlib/newlib-1.19.0.tar.gz 

 cd .. 
 chmod +x gnu-arm-build.3.sh 
 sudo bash gnu-arm-build.3.sh 
 </pre> 

 h3.    1.2 Add Cross compiler environment 

 <pre> 
 cd install/bin 
 pwd 

 vi ~/./.bashrc 
 export PATH=$PATH:/home/$username(change this to your name)/osm/install/bin 

 #save and quit 
 cd ../../ 
 source ~/.bashrc 
 </pre>  

 h3. 0x02 build CalypsoBTS  

 h3.    2.1 Build libosmo-dsp 

 <pre> 
 git clone git://git.osmocom.org/libosmo-dsp.git 
 cd libosmo-dsp/ 
 autoreconf -i 
 ./configure 
 make 
 sudo make install 
 cd .. 
 </pre> 


 h3.    2.2 Build osmocom-bb 

 <pre> 
 git clone git://git.osmocom.org/osmocom-bb.git trx 
 cd trx/ 
 git checkout jolly/testing 
 cd src/ 

 # It needs TX support 
 # Just uncomment 'CFLAGS += -DCONFIG_TX_ENABLE' in target/firmware/Makefile 

 # And make with transceiver support 
 make HOST_layer23_CONFARGS=--enable-transceiver 
 </pre> 


 h3.    2.3 Install dependency package 

 <pre> 
 sudo apt-get install sqlite3 libdbi-dev libdbd-sqlite3 libsctp-dev 
 </pre> 

 h3.    2.4 Build Ortp 
 
 <pre> 
 wget http://download.savannah.gnu.org/releases/linphone/ortp/sources/ortp-0.22.0.tar.gz 
 tar -xvf ortp-0.22.0.tar.gz 
 cd ortp-0.22.0/ 
 ./configure 
 make 
 sudo make install 
 sudo ldconfig 
 cd .. 
 </pre> 


 h3.    2.5 Build libosmo-abis 

 <pre> 
 git clone git://git.osmocom.org/libosmo-abis.git 
 cd libosmo-abis 
 autoreconf -i 
 ./configure 
 make 
 sudo make install 
 sudo ldconfig 
 cd .. 
 </pre> 

 h3.    2.6 Build libosmo-netif 

 <pre> 
 git clone git://git.osmocom.org/libosmo-netif.git 
 cd libosmo-netif/ 
 autoreconf -i 
 ./configure 
 make 
 sudo make install 
 sudo ldconfig 
 cd .. 
 </pre> 

 h3.    2.7 Build openbsc 
 
 install PCAP library frist 
 <pre> 
 apt-cache search PCAP 
 sudo pat-get install libpcap-dev libpcap0.8 libpcap0.8-dbg libpcap0.8-dev 
 sudo ldconfig 

 git clone git://git.osmocom.org/openbsc.git 
 cd openbsc/openbsc/ 
 autoreconf -i 
 ./configure 
 make 
 sudo make install 
 cd ../.. 

 </pre> 

 h3.    2.8 Build osmo-bts 

 <pre> 
 git clone git://git.osmocom.org/osmo-bts.git 
 cd osmo-bts 
 autoreconf -i 
 ./configure --enable-trx 
 make 
 sudo make install 
 cd .. 
 </pre>  


 h3.    2.9 Create configuration folder for OpenBSC 

 <pre> 
 # Create the configuration folder if it isn't exist yet 
 mkdir ~/.osmocom 
 cd ~/.osmocom 
 touch ~/.osmocom/open-bsc.cfg 
 touch ~/.osmocom/osmo-bts.cfg 
 </pre> 


 h3.    0x03 Build Cellular Infrastructure 

 h3. 3.1 Clone  

 <pre> 
 git clone git://git.osmocom.org/libosmocore 
 git clone git://git.osmocom.org/libosmo-abis 
 git clone git://git.osmocom.org/openbsc 
 git clone git://git.osmocom.org/libosmo-netif 
 git clone git://git.osmocom.org/libosmo-sccp 
 git clone git://git.osmocom.org/libsmpp34 
 git clone git://git.osmocom.org/openggsn 
 </pre> 


 h3.    3.2 Download and run build script 

 <pre> 
 wget https://osmocom.org/attachments/download/2438/build_2G.sh 
 chmod 777    build_2G.sh 
 sudo bash build_2G.sh 
 </pre> 
 h3. Run BTS 

 Terminal 1: 
 <pre> 
 osmo-nitb -c ~/.osmocom/open-bsc.cfg -l ~/.osmocom/hlr.sqlite3 -P -C --debug=DRLL:DCC:DMM:DRR:DRSL:DNM 
 </pre>  

 Terminal 2: 
 <pre> 
 telnet localhost 4242 
 </pre> 

 !2017-04.png! 

 <pre> 
 OpenBSC> show version 
 OpenBSC 0.15.0.726-ca27 (OpenBSC). 
 Copyright (C) 2008-2016 Harald Welte, Holger Freyther 
 Contributions by Daniel Willmann, Jan Lübbe, Stefan Schmidt 
 Dieter Spaar, Andreas Eversberg, Sylvain Munaut, Neels Hofmeyr 

 License AGPLv3+: GNU AGPL version 3 or later <http://gnu.org/licenses/agpl-3.0.html> 
 This is free software: you are free to change and redistribute it. 
 There is NO WARRANTY, to the extent permitted by law. 

 </pre> 

 2017/04/11 

 h2. Configuring the ip.access nano3G 

 !network.jpg! 

 h3. PC 

 IP:192.168.31.147 (With WiFi) 

 h3. Route 

 IP:192.168.31.1 

 h3. 3G Access Point 

 IP:unkonw 

 <pre> 
 cd openbsc/openbsc/src/ipaccess 
 #or 
 cd openbsc/openbsc/build-2G/src/ipaccess 

 sudo ./abisip-find  

 </pre> 

 !ipfind.png! 

 <pre> 
 telnet 3G Access Point's IP 8090 
 </pre> 

 !telnet.png! 


 <pre> 
 ssh -oKexAlgorithms=+diffie-hellman-group1-sha1 root@192.168.31.136 root@192.168.0.124 
 password:newsys 
 </pre> 

 !Snip20170411_2.png! 

 init3@0xroot:~/osm/openbsc/openbsc/src/ipaccess$ ./ipaccess-config --help 
 ipaccess-config (C) 2009-2010 by Harald Welte and others 
 This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY 

 Usage: ipaccess-config IP_OF_BTS 
 Commands for writing to the BTS: 
   -u --unit-id UNIT_ID        Set the Unit ID of the BTS 
   -o --oml-ip IP          Set primary OML IP (IP of your BSC) 
   -i --ip-address IP/MASK     Set static IP address + netmask of BTS 
   -g --ip-gateway IP          Set static IP gateway of BTS 
   -r --restart            Restart the BTS (after other operations) 
   -n --nvram-flags FLAGS/MASK     Set NVRAM attributes 
   -S --nvattr-set FLAG    Set one additional NVRAM attribute 
   -U --nvattr-unset FLAG      Set one additional NVRAM attribute 
   -l --listen TESTNR          Perform specified test number 
   -L --Listen TEST_NAME       Perform specified test 
   -s --stream-id ID       Set the IPA Stream Identifier for OML 
   -d --software FIRMWARE      Download firmware into BTS 

 Miscellaneous commands: 
   -h --help           this text 
   -H --HELP           Print parameter details. 
   -f --firmware FIRMWARE      Provide firmware information 
   -w --write-firmware         This will dump the firmware parts to the filesystem. Use with -f. 
   -p --loop           Loop the tests executed with the --listen command. 
 </pre> 

 <pre> 
 init3@0xroot:~/osm/openbsc/openbsc/src/ipaccess$ ./ipaccess-proxy --help 
 Usage: ipaccess-proxy [options] 
  ipaccess-proxy is a proxy BTS. 
  -h --help. This help text. 
  -l --listen IP. The ip to listen to. 
  -b --bsc IP. The BSC IP address. 
  -g --gprs IP. Take GPRS NS from that IP. 

  -s --disable-color. Disable the color inside the logging message. 
  -e --log-level number. Set the global loglevel. 
  -T --timestamp. Prefix every log message with a timestamp. 
  -V --version. Print the version of OpenBSC. 
 </pre> 

 h2. Femto Config 

 coming soon
Add picture from clipboard (Maximum size: 48.8 MB)