SysmoUSIM-SJS1 » History » Revision 6
Revision 5 (laforge, 05/28/2016 12:32 PM) → Revision 6/21 (laforge, 05/28/2016 12:34 PM)
{{>toc}}
h1. sysmoUSIM-SJS1
The sysmoUSIM-SJS1 is programmable and Java capable USIM card. Not all commands are known yet and this page should grow over time. Each card is using a separate ADM1 key and the default configuration is hacker/developer friendly (fields being writable, reduced security for installing applets to have more quick development cycles).
Please see [[shadysim.py]] for a tutorial on installing and removing a SIM Toolkit.
h2. User Manual
sysmocom provides a user manual at https://www.sysmocom.de/downloads/sysmousim-manual.pdf
h2. Availability
sysoUSIM-SJS1 is available from http://shop.sysmocom.de/ in both 2FF+3FF (micro) and 2FF+4FF (nano) form factors.
h2. Command Reference
To understand this reference, it is assumed that you are familiar with basic knowledge on smartcard
technologies, such as standard ISO 7816-3/-4 APDUs and GSM TS 11.11.
The below should be possible to set after authenticating with the ADM1 pin
h3. Setting the IMSI
Use a standard UPDATE BINARY command on EF.IMSI (7F20/6F07)
h3. Setting the ICCID
Use a standard UPDATE BINARY command on EF.ICCID (2FE2)
h3. Setting the Ki
Use a standard UPATE BINARY command on EF.KI (7F20/00FF)
h3. Setting the OP
Use a standard UPATE BINARY command on EF.MilenageOP (7F20/00FD)
h3. Setting the OPC
Use a standard UPATE BINARY command on EF.MilenageOPC (7F20/00FC)
h3. Setting the Algorithm(s)
Use a standard UPDATE BINARY command on EF.AUTH (7FCC/6F00)
Two bytes, first byte for 2G, second byte for 3G.
Value '01' for milenage
Value '03' for COMP128v1 (only allowed for 2G)
