Project

General

Profile

Nuttx-bb » History » Version 26

gnutoo, 02/19/2016 10:49 PM

1 24 gnutoo
[[Image(c155.JPG, 10%)]]
2 1 gnutoo
== Introduction ==
3
Nuttx-bb is a port of nuttx on phones compatible with osmocom-bb.
4 6 gnutoo
Currently it was tested on:
5
 * The GTA02
6
 * The Motorola W220.
7
 * The Motorola c155.
8 1 gnutoo
9 8 gnutoo
== News ==
10 22 gnutoo
 * The keypad driver is now integrated into nuttx but still lack proper key mapping(pressing the 2 button gives a 'c' and releasing it gives a 'C')
11 21 gnutoo
 * The keypad driver of the c155 now works with [http://cgit.osmocom.org/cgit/nuttx-bb/log/?h=keypad that branch]
12 19 gnutoo
 * The LCD driver of the c155 was integrated upstream
13 18 gnutoo
 * The LCD of the c155 [http://acassis.wordpress.com/2012/06/10/nuttx-on-motorola-c155-a-long-way-to-get-visible/ now works] [https://gitorious.org/gnutoo-s-for-upstream-osmocom-bb-and-nuttx-bb/nuttx-bb-gta02/commits/lcd_rewrite+rebase+split with that branch ]
14 15 gnutoo
 * SPI was made standalone and doesn't depend anymore on osmocom-bb(spi is not wrapped anymore).
15 10 gnutoo
 * poweroff and SPI support were merged in the upstream nuttx
16 8 gnutoo
 * initial support for the calypso and compal_e99 and compal_e88 were merged in the upstream nuttx
17
18 1 gnutoo
== Resources ==
19 20 gnutoo
 * [wiki:nuttx-bb/TODO] : not yet done tasks
20 25 gnutoo
 * [wiki:nuttx-bb/configurations] : How to configure,compile and run nuttx.
21 26 gnutoo
 * [wiki:nuttx-bb/compile]: How to compile nuttx-bb with the sercomm(different kind of serial console) configuration option
22 4 gnutoo
 * [wiki:nuttx-bb/run] : How to load and run nuttx-bb
23 12 gnutoo
 * [wiki:nuttx-bb/apps] : How to run applications on top of the NSH shell
24 11 gnutoo
 * [wiki:nuttx-bb/drivers] : Status of the driver support
25 5 gnutoo
 * [wiki:nuttx-bb/code-audit] : Code audit for inclusion upstream ( nuttx is BSD while osmocom-bb is GPL)
Add picture from clipboard (Maximum size: 48.8 MB)