Project

General

Profile

Actions

Meas web » History » Revision 6

« Previous | Revision 6/8 (diff) | Next »
Anonymous, 02/19/2016 10:48 PM


Not finished yet!

Web version of the OpenBSC meas_vis utility

This tool will allow you to display and browse the measurement reports of OpenBSC on a web based interface.

https://github.com/fairwaves/meas_web

How to install and configure the meas_web utlility:

Get the code:

git clone https://github.com/fairwaves/meas_web.git

Install dependencies:

1. Install websocketd:

https://github.com/joewalnes/websocketd/releases/

In this example we are going to use a 64bit version:

wget https://github.com/joewalnes/websocketd/releases/download/v0.2.11/websocketd-0.2.11_amd64.deb

sudo dpkg -i websocketd-0.2.11_amd64.deb

2. Install runit:

sudo apt-get install runit

3. Configure runit:

Copy the content of the meas_web/etc folder to your /etc folder:

cd meas_web

sudo cp -avr etc /

4. Make sure the "meas_vis" utility is compiled:

Go to the utility folder of your openbsc source:

cd openbsc/openbsc/src/utils

If you can't find a meas_vis binary, please run:

sudo apt-get install libcdk5-dev

sudo make meas_vis

Now you need to have the binary version of meas_vis in openbsc/openbsc/src/utils

Because meas_json is not yet part of the master, you need to download and compile it:

wget http://cgit.osmocom.org/openbsc/plain/openbsc/src/utils/meas_json.c?h=achemeris/meas_json

mv meas_json.c\?h\=achemeris%2Fmeas_json meas_jscn.c

5. Add the following line at the bottom of your openbsc.conf:

mncc-int
meas-feed destination 127.0.0.1 8888

Files (0)

Updated by about 8 years ago · 6 revisions

Add picture from clipboard (Maximum size: 48.8 MB)