BS11LMT » History » Revision 3
Revision 2 (Anonymous, 02/19/2016 10:47 PM) → Revision 3/8 (Anonymous, 02/19/2016 10:47 PM)
== How to use LMT ==
* connect serial port of PC with J2 on BS11 using the cable that came with the BS11
* start LMT program
=== LMT rs232 connector pinout ===
If you look at the BS-11 interface (Antenne connectors top), its the upper 8-pin connector:
{{{
The four E1 BNC connectors are above here.
(Rx) x x x x (right pin: Gnd)
(Tx) x x x x (right pin: +5V)
|
+ LMT
}}}
see also [http://bs11-abis.gnumonks.org/trac/attachment/wiki/BS11_Configuration/bs11_power_lmt_cabling.jpg bs11_power_lmt_cabling.jpg]
'''J2:'''
[[Image(img_6412-1.jpg, 15%)]]
{{{
1(GND)
|
| 2(TX)
| |
X 0 X 0
0 0 X 0
|
3(RX)
}}}
'''RS232:'''
[[Image(img_6414-1.jpg, 15%)]]
{{{
1(GND)
|
| 2(TX)
| |
| | 3(RX)
| | |
X 0 X X 0
0 0 0 0
}}}
== Known Versions (and issues?) ==
=== LMT v4.17 ===
=== LMT v4.21 ===