BS11LMT » History » Revision 7
Revision 6 (laforge, 02/19/2016 10:47 PM) → Revision 7/8 (laforge, 02/19/2016 10:48 PM)
h2. == How to use LMT == * connect serial port of PC with J2 on BS11 using the cable that came with the BS11 * start LMT program h3. === LMT rs232 connector pinout === If you look at the BS-11 interface (Antenne connectors top), its the upper 8-pin connector: <pre> {{{ The four E1 BNC connectors are above here. (Rx) x x x x (right pin: Gnd) (Tx) x x x x (right pin: +5V) | + LMT </pre> }}} see also [[Image(BS11_Configuration:bs11_power_lmt_cabling.jpg)]] *J2:* '''J2:''' [[Image(img_6412-1.jpg, 15%)]] <pre> {{{ 5(GND) | | 3(TX) | | X 0 X 0 0 0 X 0 | 2(RX) </pre> *RS232:* }}} '''RS232:''' [[Image(img_6414-1.jpg, 15%)]] <pre> {{{ 5(GND) | | 3(TX) | | | | 2(RX) | | | X 0 X X 0 0 0 0 0 </pre> h2. }}} == Known Versions (and issues?) h3. == === LMT v4.17 h3. === === LMT v4.21 ===