Project

General

Profile

EC20 Additional Software

If you want to install additional software on the EC20, the method described in Installing_Software about re-adding opkg will work.

Attached you will find the .tar.gz files of libopkg, opkg and opkg-config-base. Extract them to the root directory.

The additional ipk files will provide you tools like screen, lsof, strace, socat - which are very useful for further debugging/analysis of the device.

We will probably be setting up a package repository/feed at some later point from where pre-compiled packages can be installed.

Licensing information about the respective programs is included in the ipk files as debian-control information. If you would like to receive the full corresponding source code of GPL/LGPL covered software, please contact .

Builds were made from 746e8ffa of https://source.codeaurora.org/quic/le/openembedded/openembedded-core/

libglib-2.0-0_2.32.4-r0_armv7a-vfp-neon.ipk (844 KB) laforge, 12/25/2016 11:02 PM

libopkg1_0.1.8+svnr633-r7.0_armv7a-vfp-neon.tar.gz (75.4 KB) laforge, 12/25/2016 11:02 PM

libreadline6_6.2-r0_armv7a-vfp-neon.ipk (119 KB) laforge, 12/25/2016 11:02 PM

libtinfo5_5.9-r4.1_armv7a-vfp-neon.ipk (52.3 KB) laforge, 12/25/2016 11:02 PM

libwrap0_7.6-r9_armv7a-vfp-neon.ipk (13.6 KB) laforge, 12/25/2016 11:02 PM

lsof_4.85-r0_armv7a-vfp-neon.ipk (66.1 KB) laforge, 12/25/2016 11:02 PM

ncurses-terminfo-base_5.9-r4.1_armv7a-vfp-neon.ipk (4.95 KB) laforge, 12/25/2016 11:02 PM

opkg_0.1.8+svnr633-r7.0_armv7a-vfp-neon.tar.gz (6.35 KB) laforge, 12/25/2016 11:02 PM

opkg-config-base_1.0-r0_9615_cdp.tar.gz (320 Bytes) laforge, 12/25/2016 11:02 PM

screen_4.0.3-r2_armv7a-vfp-neon.ipk (414 KB) laforge, 12/25/2016 11:03 PM

socat_1.7.3.1-r0_armv7a-vfp-neon.ipk (163 KB) laforge, 12/25/2016 11:05 PM

strace_4.6-r0_armv7a-vfp-neon.ipk (96.3 KB) laforge, 12/25/2016 11:05 PM