Project

General

Profile

EC25 Linux

Kernel Version

for rev in `cat tags`; do patchsize=$(git diff -w $rev | wc -l); echo $patchsize $rev; done
8496400 LNX.LE.5.2-75040-9x40
8495851 LNX.LE.5.2-75075-9x40
8497159 LNX.LE.5.2-75110-9x40
8497416 LNX.LE.5.2-75128-9x40
8497603 LNX.LE.5.2-75177-9x40
8497603 LNX.LE.5.2-75190-9x40
444556 LNX.LE.5.3-76020-9x40
504035 LNX.LE.5.3-76035-9x40
540243 LNX.LE.5.3-76105-9x40
542904 LNX.LE.5.3-76132-9x40
516225 LNX.LE.5.3-79002-9x40
537202 LNX.LE.5.3-79003-9x40
542904 LNX.LE.5.3.1-82005-9x40
546475 LNX.LE.5.3.1-82011-9x40
542904 LNX.LE.5.3.c1-81026-9x40
8533963 LNX.LE.5.0-56003-9x40
8535277 LNX.LE.5.0-56005-9x40
8533539 LNX.LE.5.0-56009-9x40
8533462 LNX.LE.5.0-56016-9x40
8533414 LNX.LE.5.0-56020-9x40

the above shows that LNX.LE.5.3-76020-9x40 is actually the closest tag to what Quectel is shipping. But then, it still has more than 440k lines of diffstat, i.e. is significantly different. More research is needed on why that is. Maybe Qualcomm has provided a non-tagged version to Quectel?

bootloader

Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.2-00055
S - IMAGE_VARIANT_STRING=LAATANAZA
S - OEM_IMAGE_VERSION_STRING=becking-PC
S - Boot Config, 0x000002e1
B -      1216 - PBL, Start
B -      3723 - bootable_media_detect_entry, Start
B -      5002 - bootable_media_detect_success, Start
B -      5006 - elf_loader_entry, Start
B -      8457 - auth_hash_seg_entry, Start
B -      8678 - auth_hash_seg_exit, Start
B -     51007 - elf_segs_hash_verify_entry, Start
B -     90729 - PBL, End
B -     99247 - SBL1, Start
B -    157258 - pm_device_init, Start
B -    177388 - PM_SET_VAL:Skip
D -     18086 - pm_device_init, Delta
B -    178364 - boot_config_data_table_init, Start
D -    174917 - boot_config_data_table_init, Delta - (420 Bytes)
B -    356819 - CDT version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0
B -    363255 - sbl1_ddr_set_params, Start
B -    366823 - cpr_init, Start
D -        30 - cpr_init, Delta
B -    372374 - Pre_DDR_clock_init, Start
D -       213 - Pre_DDR_clock_init, Delta
D -         0 - sbl1_ddr_set_params, Delta
B -    385093 - pm_driver_init, Start
D -      4544 - pm_driver_init, Delta
B -    397537 - sbl1_qhsusb_al_do_fast_enum, Start
D -        30 - sbl1_qhsusb_al_do_fast_enum, Delta
B -    400495 - clock_init, Start
D -       152 - clock_init, Delta
B -    406290 - boot_flash_init, Start
D -     37667 - boot_flash_init, Delta
B -    448136 - Image Load, Start
D -     56608 - QSEE Image Loaded, Delta - (451980 Bytes)
B -    504744 - Image Load, Start
D -        30 - SEC Image Loaded, Delta - (0 Bytes)
B -    512278 - sbl1_efs_handle_cookies, Start
D -         0 - sbl1_efs_handle_cookies, Delta
B -    519567 - Image Load, Start
D -     31903 - RPM Image Loaded, Delta - (151152 Bytes)
B -    551531 - Image Load, Start
D -     20710 - APPSBL Image Loaded, Delta - (178836 Bytes)
B -    572271 - QSEE Execution, Start
D -       213 - QSEE Execution, Delta
B -    578036 - SBL1, End
D -    481076 - SBL1, Delta
S - Throughput, 2000 KB/s  (782388 Bytes,  268183 us)
S - DDR Frequency, 240 MHz
Android Bootloader - UART_DM Initialized!!!
[0] welcome to lk

[0] SCM call: 0x2000601 failed with :fffffffc
[0] Failed to initialize SCM
[10] platform_init()
[10] target_init()
[10] 111 flash->id=0x2690ac2c,supported_flash[0]=0x1590ac2c, flash->id2=0x54, supported_flash_id2=0x56[20] 111 flash->id=0x2690ac2c,supported_flash[1]=0x1590ac01, flash->id2=0x54, supported_flash_id2=0x56[30] 111 flash->id=0x2690ac2c,supported_flash[2]=0x1590ac2c, flash->id2=0x54, supported_flash_id2=0x57[30] 111 flash->id=0x2690ac2c,supported_flash[3]=0x1590aa2c, flash->id2=0x54, supported_flash_id2=0x6[40] 111 flash->id=0x2690ac2c,supported_flash[4]=0x2690ac2c, flash->id2=0x54, supported_flash_id2=0x54[50] smem ptable found: ver: 4 len: 16
[60] ERROR: No devinfo partition found
[60] Neither 'config' nor 'frp' partition found
[60] CTL+C key, enter the FastBoot
[90] @Ramos Read flag qpic_nand_read_page =0x2440, 
[90] @Ramos Read flag qpic_nand_read_page result=0, 
[90] flash_read_image: success (0 errors)
[100] @Ramos Ql_check_RestoreFlag:offset=940000, magic1=78e5d4c2,magic2=54f7d60e,linuxfs_restoreFlag=0, cefs_restoreFlag=0
[110] @Ramos Read flag qpic_nand_read_page =0x2440, 
[110] @Ramos Read flag qpic_nand_read_page result=0, 
[120] flash_read_image: success (0 errors)
[120] @Ramos Ql_check_RestoreFlag:offset=940000, magic1=78e5d4c2,magic2=54f7d60e,linuxfs_restoreFlag=0, cefs_restoreFlag=0
[130] BBBBLoading (boot) image (5259264): start
[650] BBBBBLoading (boot) image (5259264): done
[660] DTB Total entry: 25, DTB version: 3
[660] Using DTB entry 0x00000129/00010000/0x00000008/0 for device 0x00000129/00010000/0x00010008/0
[680] cmdline: noinitrd  rw console=ttyHSL0,115200,n8 androidboot.hardware=qcom ehci-hcd.park=3 msm_rtb.filter=0x37 lpm_levels.sleep_disabled=1  earlycon=msm_hsl_uart,0x78b3000  androidboot.serialno=313a01a5 androidboot.baseband=msm rootfstype=ubifs rootflags=b[700] Updating device tree: start
[830] Updating device tree: done
[840] booting linux @ 0x80008000, ramdisk @ 0x80008000 (0), tags/device tree @ 0x81e00000

msm LNX version

msm LNX.LE.5.0.1-57031-9x40 mdm9607-perf /dev/ttyHSL0

root password

oelinux1, like on EC20

df

root@mdm9607-perf:~# df
Filesystem           1K-blocks      Used Available Use% Mounted on
ubi0:rootfs              57132     37260     19872  65% /
ubi1:modem               60864     33804     27060  56% /firmware
tmpfs                       64         4        60   6% /dev
tmpfs                    79788        20     79768   0% /run
tmpfs                    79788        56     79732   0% /var/volatile
tmpfs                    79788         0     79788   0% /media/ram
ubi0:usrfs               55032       916     54116   2% /data

ps

root@mdm9607-perf:~# ps axuw
PID   USER     TIME   COMMAND
    1 root       0:06 init [5]
    2 root       0:00 [kthreadd]
    3 root       0:00 [ksoftirqd/0]
    4 root       0:00 [kworker/0:0]
    5 root       0:00 [kworker/0:0H]
    6 root       0:00 [kworker/u2:0]
    7 root       0:00 [rcu_preempt]
    8 root       0:00 [rcu_sched]
    9 root       0:00 [rcu_bh]
   10 root       0:00 [khelper]
   11 root       0:00 [netns]
   12 root       0:00 [perf]
   13 root       0:00 [msm_watchdog]
   14 root       0:00 [smd_channel_clo]
   15 root       0:00 [smsm_cb_wq]
   16 root       0:00 [kworker/u2:1]
   17 root       0:00 [deferwq]
   18 root       0:00 [kworker/0:1]
   19 root       0:00 [irq/52-cpr]
   20 root       0:00 [mpm]
   21 root       0:00 [kworker/u2:2]
   22 root       0:00 [kworker/u2:3]
   29 root       0:00 [writeback]
   30 root       0:00 [crypto]
   31 root       0:00 [bioset]
   32 root       0:00 [kblockd]
   33 root       0:00 [system]
   34 root       0:00 [devfreq_wq]
   35 root       0:00 [cfg80211]
   36 root       0:00 [power_off_alarm]
   37 root       0:00 [kswapd0]
   38 root       0:00 [fsnotify_mark]
   46 root       0:00 [glink_ssr_wq]
   47 root       0:00 [apr_driver]
   48 root       0:00 [k_hsuart]
   49 root       0:00 [msm_serial_hs_0]
   50 root       0:00 [msm_serial_hs_0]
   51 root       0:00 [diag_real_time_]
   52 root       0:00 [diag_wq]
   53 root       0:00 [DIAG_USB_diag]
   54 root       0:00 [diag_cntl_wq]
   55 root       0:00 [diag_dci_wq]
   56 root       0:00 [DIAG_SMD_MODEM_]
   57 root       0:00 [DIAG_SMD_MODEM_]
   58 root       0:00 [DIAG_SMD_MODEM_]
   59 root       0:00 [DIAG_SMD_MODEM_]
   60 root       0:00 [DIAG_SMD_MODEM_]
   61 root       0:00 [DIAG_SMD_LPASS_]
   62 root       0:00 [DIAG_SMD_LPASS_]
   63 root       0:00 [DIAG_SMD_LPASS_]
   64 root       0:00 [DIAG_SMD_LPASS_]
   65 root       0:00 [DIAG_SMD_LPASS_]
   66 root       0:00 [DIAG_SMD_WCNSS_]
   67 root       0:00 [DIAG_SMD_WCNSS_]
   68 root       0:00 [DIAG_SMD_WCNSS_]
   69 root       0:00 [DIAG_SMD_WCNSS_]
   70 root       0:00 [DIAG_SMD_WCNSS_]
   71 root       0:00 [DIAG_SMD_SENSOR]
   72 root       0:00 [DIAG_SMD_SENSOR]
   73 root       0:00 [DIAG_SMD_SENSOR]
   74 root       0:00 [DIAG_SMD_SENSOR]
   75 root       0:00 [DIAG_SMD_SENSOR]
   76 root       0:00 [DIAG_SOCKMODEM_]
   77 root       0:00 [DIAG_SOCKMODEM_]
   78 root       0:00 [DIAG_SOCKMODEM_]
   79 root       0:00 [DIAG_SOCKMODEM_]
   80 root       0:00 [DIAG_SOCKMODEM_]
   81 root       0:00 [DIAG_SOCKLPASS_]
   82 root       0:00 [DIAG_SOCKLPASS_]
   83 root       0:00 [DIAG_SOCKLPASS_]
   84 root       0:00 [DIAG_SOCKLPASS_]
   85 root       0:00 [DIAG_SOCKLPASS_]
   86 root       0:00 [DIAG_SOCKWCNSS_]
   87 root       0:00 [DIAG_SOCKWCNSS_]
   88 root       0:00 [DIAG_SOCKWCNSS_]
   89 root       0:00 [DIAG_SOCKWCNSS_]
   90 root       0:00 [DIAG_SOCKWCNSS_]
   91 root       0:00 [DIAG_SOCKSENSOR]
   92 root       0:00 [DIAG_SOCKSENSOR]
   93 root       0:00 [DIAG_SOCKSENSOR]
   94 root       0:00 [DIAG_SOCKSENSOR]
   95 root       0:00 [DIAG_SOCKSENSOR]
   96 root       0:00 [DIAG_CNTL_SOCKE]
   97 root       0:00 [k_gserial]
   98 root       0:00 [k_ipa_usb]
   99 root       0:00 [uether]
  100 root       0:00 [k_gbridge]
  101 root       0:00 [therm_core:noti]
  102 root       0:00 [therm_core:noti]
  103 root       0:00 [therm_core:noti]
  104 root       0:00 [therm_core:noti]
  105 root       0:00 [therm_core:noti]
  106 root       0:00 [irq/216-tsens_i]
  107 root       0:00 [therm_core:noti]
  108 root       0:00 [therm_core:noti]
  109 root       0:00 [cfinteractive]
  110 root       0:00 [irq/170-7824900]
  111 root       0:00 [irq/155-mmc0]
  112 root       0:00 [irq/253-7864900]
  113 root       0:00 [irq/157-mmc1]
  114 root       0:00 [usb_bam_wq]
  115 root       0:00 [qsmd]
  116 root       0:00 [ipv6_addrconf]
  117 root       0:00 [msm_ipc_router]
  118 root       0:00 [irq/441-modem]
  119 root       0:00 [sysmon_wq]
  120 root       0:00 [qmi_svc_event_w]
  121 root       0:00 [kworker/0:2]
  122 root       0:00 [bam_dmux_rx]
  123 root       0:00 [bam_dmux_tx]
  124 root       0:00 [ubi_bgt0d]
  125 root       0:00 [ubi_bgt1d]
  126 root       0:00 [k_bam_data]
  127 root       0:00 [f_mtp]
  129 root       0:00 [msm_thermal:fre]
  130 root       0:00 [msm_thermal:the]
  131 root       0:00 [ubifs_bgt0_0]
  132 root       0:00 [IPCRTR]
  133 root       0:00 [modem_IPCRTR]
  185 root       0:00 [ubifs_bgt0_1]
  194 root       0:00 /sbin/adbd
  229 root       0:00 psmd
  323 root       0:00 ipacm_perf
  331 root       0:00 ipacmdiag
  342 root       0:00 QCMAP_ConnectionManager /etc/mobileap_cfg.xml d
  346 root       0:00 /usr/bin/qti
  357 root       0:00 /sbin/tftp_server
  358 root       0:00 /sbin/fs-scrub-daemon
  375 root       0:00 /usr/bin/quectel_pcm_daemon
  397 root       0:00 [sh]
  426 root       0:00 [kworker/u2:4]
  458 root       0:00 /sbin/syslogd -n -C64
  494 root       0:00 [k_gsmd]
  495 root       0:00 [k_gbam]
  509 root       0:00 /usr/bin/qmuxd
  514 root       0:00 /usr/bin/thermal-engine
  518 root       0:00 /usr/bin/netmgrd
  545 root       0:00 /usr/bin/qmi_shutdown_modem
  553 root       0:00 /usr/bin/quectel-gps-handle
  564 root       0:00 /usr/bin/quectel_monitor_daemon
  599 root       0:00 /usr/bin/quectel_daemon
  605 root       0:00 /usr/bin/quectel_psm_aware
  614 root       0:00 /usr/bin/quectel-remotefs-service
  699 root       0:00 alsaucm_test
  762 nobody     0:00 dnsmasq -i bridge0 -I lo -z --dhcp-range=bridge0,192.168.
  811 www-data   0:00 /usr/sbin/lighttpd -f /etc/lighttpd.conf
  823 root       0:00 eMBMs_TunnelingModule
  827 root       0:00 /usr/bin/qmi_ip_multiclient /etc/qmi_ip_cfg.xml
  869 root       0:00 wlan_services
  981 messageb   0:00 /usr/bin/dbus-daemon --system
 1003 root       0:00 /sbin/reboot-daemon
 1009 diag       0:00 /usr/bin/diagrebootapp
 1012 root       0:00 /usr/bin/atfwd_daemon
 1052 root       0:00 /usr/bin/pdc_daemon
 1070 root       0:00 /usr/bin/time_daemon
 1071 root       0:00 /usr/bin/mbimd
 1072 root       0:00 -sh
 1123 root       0:00 ps axuw

dmesg

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.18.20 (becking@root-mdm9607) (gcc version 4.9.2 (GCC) ) #1 PREEMPT Sat Aug
 27 18:53:52 CST 2016
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Qualcomm Technologies, Inc. MDM 9607 MTP
[    0.000000] Reserved memory: reserved region for node 'modem_adsp_region@0': base 0x82a00000, size 80 
MiB
[    0.000000] Reserved memory: reserved region for node 'cnss_debug_region@0': base 0x87a00000, size 2 M
iB
[    0.000000] Reserved memory: reserved region for node 'external_image_region@0': base 0x87c00000, size
 4 MiB
[    0.000000] Removed memory: created DMA memory pool at 0x82a00000, size 80 MiB
[    0.000000] Reserved memory: initialized node modem_adsp_region@0, compatible id removed-dma-pool
[    0.000000] Removed memory: created DMA memory pool at 0x87a00000, size 2 MiB
[    0.000000] Reserved memory: initialized node cnss_debug_region@0, compatible id removed-dma-pool
[    0.000000] Removed memory: created DMA memory pool at 0x87c00000, size 4 MiB
[    0.000000] Reserved memory: initialized node external_image_region@0, compatible id removed-dma-pool
[    0.000000] Reserved memory: allocated memory for 'audio_region@0' node: base 0x8fc00000, size 4 MiB
[    0.000000] Reserved memory: created CMA memory pool at 0x8fc00000, size 4 MiB
[    0.000000] Reserved memory: initialized node audio_region@0, compatible id shared-dma-pool
[    0.000000] cma: Reserved 4 MiB at 0x8f800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 64000
[    0.000000] free_area_init_node: node 0, pgdat c0b2d288, node_mem_map cf5ce000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 64000 pages, LIFO batch:15
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 63488
[    0.000000] Kernel command line: noinitrd  rw console=ttyHSL0,115200,n8 androidboot.hardware=qcom ehci
-hcd.park=3 msm_rtb.filter=0x37 lpm_levels.sleep_disabled=1  earlycon=msm_hsl_uart,0x78b3000  androidboot
.serialno=313a01a5 androidboot.baseband=msm rootfstype=ubifs rootflags=bulk_read root=ubi0:rootfs ubi.mtd
=15 ubi.mtd=9
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 150460K/256000K available (7235K kernel code, 812K rwdata, 3096K rodata, 288K init
, 1145K bss, 105540K reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0a1f0d4   (10333 kB)
[    0.000000]       .init : 0xc0a20000 - 0xc0a68000   ( 288 kB)
[    0.000000]       .data : 0xc0a68000 - 0xc0b33120   ( 813 kB)
[    0.000000]        .bss : 0xc0b331e4 - 0xc0c517e0   (1146 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] GIC CPU mask not found - kernel will fail to boot.
[    0.000000] GIC CPU mask not found - kernel will fail to boot.
[    0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
[    0.000000] MPM 1 irq mapping errored -517
[    0.000000] Architected mmio timer(s) running at 19.20MHz (virt).
[    0.000009] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
[    0.000025] Switching to timer-based delay loop, resolution 52ns
[    0.000044] Switched to clocksource arch_mem_counter
[    0.000729] Console: colour dummy device 80x30
[    0.000749] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS 
(lpj=192000)
[    0.000765] pid_max: default: 32768 minimum: 301
[    0.000877] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000892] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001546] Initializing cgroup subsys freezer
[    0.001573] Initializing cgroup subsys debug
[    0.001610] CPU: Testing write buffer coherency: ok
[    0.001962] Setting up static identity map for 0x806e0be0 - 0x806e0c38
[    0.002896] 
[    0.002896] **********************************************************
[    0.002913] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.002922] **                                                      **
[    0.002930] ** trace_printk() being used. Allocating extra memory.  **
[    0.002938] **                                                      **
[    0.002946] ** This means that this is a DEBUG kernel and it is     **
[    0.002954] ** unsafe for produciton use.                           **
[    0.002962] **                                                      **
[    0.002970] ** If you see this message and you are not debugging    **
[    0.002978] ** the kernel, report this immediately to your vendor!  **
[    0.002986] **                                                      **
[    0.002994] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.003002] **********************************************************
[    0.003832] MSM Memory Dump base table set up
[    0.003868] MSM Memory Dump apps data table set up
[    0.013449] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.015220] pinctrl core: initialized pinctrl subsystem
[    0.015646] regulator-dummy: no parameters
[    0.043886] NET: Registered protocol family 16
[    0.045792] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.100106] cpuidle: using governor ladder
[    0.130098] cpuidle: using governor menu
[    0.160096] cpuidle: using governor qcom
[    0.168923] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
[    0.169213] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
[    0.171905] irq: no irq domain found for /soc/pinctrl@1000000 !
[    0.172966] irq: no irq domain found for /soc/pinctrl@1000000 !
[    0.177867] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
[    0.180640] platform 4080000.qcom,mss: assigned reserved memory node modem_adsp_region@0
[    0.181049] irq: no irq domain found for /soc/pinctrl@1000000 !
[    0.181455] irq: no irq domain found for /soc/pinctrl@1000000 !
[    0.182295] mem_acc_corner: 0 <--> 0 mV 
[    0.183256] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.183270] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.184289] gpiochip_add: registered GPIOs 0 to 79 on device: 1000000.pinctrl
[    0.184309] GPIO chip 1000000.pinctrl: created GPIO range 0->79 ==> 1000000.pinctrl PIN 0->79
[    0.184889] __of_mpm_init(): MPM driver mapping exists
[    0.185424] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
[    0.185440] msm_rpm_dev_probe: APSS-RPM communication over SMD
[    0.185452] smd_open() before smd_init()
[    0.186082] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
[    0.188401] smd_channel_probe_now: allocation table not initialized
[    0.190696] mdm9607_s1: 1050 <--> 1350 mV at 1225 mV normal idle 
[    0.190868] spm_regulator_probe: name=mdm9607_s1, range=LV, voltage=1225000 uV, mode=AUTO, step rate=4800 uV/us
[    0.191383] cpr_efuse_init: apc_corner: efuse_addr = 0x000a4000 (len=0x1000)
[    0.191433] cpr_read_fuse_revision: apc_corner: fuse revision = 2
[    0.191453] cpr_parse_speed_bin_fuse: apc_corner: [row: 37]: 0x97590032313a01a5, speed_bits = 4
[    0.191535] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1100000 1250000] uV
[    0.191550] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1225000 1350000] uV
[    0.191563] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1150000] uV
[    0.192204] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
[    0.192282] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
[    0.192300] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
[    0.195274] msm-thermal soc:qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,core-limit-temp. err=-22. KTM continues
[    0.195309] msm-thermal soc:qcom,msm-thermal: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
[    0.195359] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
[    0.196387] sps:sps is ready.
[    0.198421] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
[    0.198437] msm_rpm_dev_probe: APSS-RPM communication over SMD
[    0.199447] mdm9607_s2: 750 <--> 1275 mV at 750 mV normal idle 
[    0.200421] mdm9607_s3_level: 0 <--> 0 mV at 0 mV normal idle 
[    0.200972] mdm9607_s3_level_ao: 0 <--> 0 mV at 0 mV normal idle 
[    0.201536] mdm9607_s3_floor_level: 0 <--> 0 mV at 0 mV normal idle 
[    0.202065] mdm9607_s3_level_so: 0 <--> 0 mV at 0 mV normal idle 
[    0.202788] mdm9607_s4: 1800 <--> 1950 mV at 1800 mV normal idle 
[    0.203543] mdm9607_l1: 1250 mV normal idle 
[    0.204305] mdm9607_l2: 1800 mV normal idle 
[    0.205036] mdm9607_l3: 1800 mV normal idle 
[    0.205778] mdm9607_l4: 3075 mV normal idle 
[    0.206556] mdm9607_l5: 1700 <--> 3050 mV at 1700 mV normal idle 
[    0.207260] mdm9607_l6: 1700 <--> 3050 mV at 1700 mV normal idle 
[    0.207955] mdm9607_l7: 1700 <--> 1900 mV at 1700 mV normal idle 
[    0.208680] mdm9607_l8: 1800 mV normal idle 
[    0.209361] mdm9607_l9: 1200 <--> 1250 mV at 1200 mV normal idle 
[    0.210352] mdm9607_l10: 1050 mV normal idle 
[    0.211117] mdm9607_l11: 1800 mV normal idle 
[    0.211818] mdm9607_l12_level: 0 <--> 0 mV at 0 mV normal idle 
[    0.212389] mdm9607_l12_level_ao: 0 <--> 0 mV at 0 mV normal idle 
[    0.212935] mdm9607_l12_level_so: 0 <--> 0 mV at 0 mV normal idle 
[    0.213449] mdm9607_l12_floor_lebel: 0 <--> 0 mV at 0 mV normal idle 
[    0.214202] mdm9607_l13: 1800 <--> 2850 mV at 2850 mV normal idle 
[    0.214923] mdm9607_l14: 2650 <--> 3000 mV at 2650 mV normal idle 
[    0.215174] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
[    0.215490] cpr_efuse_init: apc_corner: efuse_addr = 0x000a4000 (len=0x1000)
[    0.215540] cpr_read_fuse_revision: apc_corner: fuse revision = 2
[    0.215559] cpr_parse_speed_bin_fuse: apc_corner: [row: 37]: 0x97590032313a01a5, speed_bits = 4
[    0.215641] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1100000 1250000] uV
[    0.215656] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1225000 1350000] uV
[    0.215669] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1150000] uV
[    0.215888] cpr_init_cpr_parameters: apc_corner: up threshold = 2, down threshold = 3
[    0.215918] cpr_init_cpr_parameters: apc_corner: CPR is enabled by default.
[    0.215950] cpr_init_cpr_efuse: apc_corner: [row:65] = 0x15600283283372
[    0.215972] cpr_init_cpr_efuse: apc_corner: CPR disable fuse = 0
[    0.215986] cpr_init_cpr_efuse: apc_corner: Corner[1]: ro_sel = 0, target quot = 643
[    0.215999] cpr_init_cpr_efuse: apc_corner: Corner[2]: ro_sel = 0, target quot = 643
[    0.216012] cpr_init_cpr_efuse: apc_corner: Corner[3]: ro_sel = 0, target quot = 882
[    0.216195] cpr_config: apc_corner: Timer count: 0x17700 (for 5000 us)
[    0.216686] apc_corner: 0 <--> 0 mV 
[    0.217181] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
[    0.217258] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
[    0.217275] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
[    0.217795] msm-thermal soc:qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,core-limit-temp. err=-22. KTM continues
[    0.217825] msm-thermal soc:qcom,msm-thermal: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
[    0.217945] msm_thermal:get_kernel_cluster_info CPU0 topology not initialized.
[    0.218401] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    0.218417] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
[    0.218428] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
[    0.218893] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    0.218909] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
[    0.218924] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    0.218934] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
[    0.229022] qcom,gcc-mdm9607 1800000.qcom,gcc: Registered GCC clocks
[    0.229440] clock-a7 b010008.qcom,clock-a7: Speed bin: 4 PVS Version: 0
[    0.229519] a7ssmux: set OPP pair(400000000 Hz: 1 uV) on cpu0
[    0.229555] a7ssmux: set OPP pair(1305600000 Hz: 7 uV) on cpu0
[    0.231105] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
[    0.231190] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[    0.231208] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[    0.281649] gpiochip_find_base: found new base at 1018
[    0.281812] gpiochip_add: registered GPIOs 1018 to 1023 on device: pm8019-gpio
[    0.282108] qcom,qpnp-pin qpnp-pin-cf30ec00: qpnp_pin_probe: gpio_chip registered between 1018-1023
[    0.282283] gpiochip_find_base: found new base at 1012
[    0.282412] gpiochip_add: registered GPIOs 1012 to 1017 on device: pm8019-mpp
[    0.282843] qcom,qpnp-pin qpnp-pin-cf30ee00: qpnp_pin_probe: gpio_chip registered between 1012-1017
[    0.283137] KPI: Bootloader start count = 21414
[    0.283151] KPI: Bootloader end count = 49438
[    0.283162] KPI: Bootloader display count = 3135809712
[    0.283172] KPI: Bootloader load kernel count = 17006
[    0.283182] KPI: Kernel MPM timestamp = 70838
[    0.283192] KPI: Kernel MPM Clock frequency = 32768
[    0.283223] socinfo_print: v0.10, id=297, ver=1.0, raw_id=72, raw_ver=0, hw_plat=8, hw_plat_ver=65536
[    0.283223]  accessory_chip=0, hw_plat_subtype=0, pmic_model=65539, pmic_die_revision=131074 foundry_id=1 serial_number=825885093
[    0.283609] of_get_named_gpiod_flags: parsed 'gpio' property of node '/soc/sdcard_ext_vreg[0]' - status (0)
[    0.283817] sdcard_ext_vreg: no parameters
[    0.284046] of_get_named_gpiod_flags: parsed 'gpio' property of node '/soc/rome_vreg[0]' - status (0)
[    0.284249] rome_vreg: no parameters
[    0.284414] of_get_named_gpiod_flags: parsed 'gpio' property of node '/soc/emac_lan_vreg[0]' - status (0)
[    0.284586] emac_lan_vreg: no parameters
[    0.285674] SCSI subsystem initialized
[    0.285892] usbcore: registered new interface driver usbfs
[    0.285978] usbcore: registered new interface driver hub
[    0.286169] usbcore: registered new device driver usb
[    0.287146] cpufreq: driver msm up and running
[    0.287641] platform soc:qcom,ion:qcom,ion-heap@28: assigned reserved memory node audio_region@0
[    0.287938] ION heap system created
[    0.288125] ION heap audio created at 0x8fc00000 with size 400000
[    0.288463] msm_bus_fabric_init_driver
[    0.295560] qcom,qpnp-power-on qpnp-power-on-cf30e200: PMIC@SID0 Power-on reason: Triggered from CBL (external power supply) and 'cold' boot
[    0.295589] qcom,qpnp-power-on qpnp-power-on-cf30e200: PMIC@SID0: Unknown power-off reason
[    0.295810] input: qpnp_pon as /devices/virtual/input/input0
[    0.296252] PMIC@SID0: PM8019 v2.2 options: 3, 2, 2, 2
[    0.297342] Advanced Linux Sound Architecture Driver Initialized.
[    0.297927] Bluetooth: Core ver 2.19
[    0.297977] NET: Registered protocol family 31
[    0.297986] Bluetooth: HCI device and connection manager initialized
[    0.298000] Bluetooth: HCI socket layer initialized
[    0.298012] Bluetooth: L2CAP socket layer initialized
[    0.298055] Bluetooth: SCO socket layer initialized
[    0.298325] cfg80211: Calling CRDA to update world regulatory domain
[    0.298355] cfg80211: World regulatory domain updated:
[    0.298364] cfg80211:  DFS Master region: unset
[    0.298373] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    0.298384] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    0.298394] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    0.298403] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    0.298413] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    0.298423] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    0.298433] cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    0.298443] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    0.298453] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    0.299298] Switched to clocksource arch_mem_counter
[    0.321612] NET: Registered protocol family 2
[    0.322223] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.322258] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
[    0.322304] TCP: Hash tables configured (established 2048 bind 2048)
[    0.322353] TCP: reno registered
[    0.322366] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.322389] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.322546] NET: Registered protocol family 1
[    0.324203] futex hash table entries: 256 (order: 0, 7168 bytes)
[    0.329168] msgmni has been set to 309
[    0.330756] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.330776] io scheduler noop registered
[    0.330790] io scheduler deadline registered
[    0.330897] io scheduler cfq registered (default)
[    0.330988] gpiochip_find_base: found new base at 980
[    0.331091] gpiochip_add: registered GPIOs 980 to 1011 on device: smp2p
[    0.331237] gpiochip_find_base: found new base at 948
[    0.331328] gpiochip_add: registered GPIOs 948 to 979 on device: smp2p
[    0.331365] gpiochip_find_base: found new base at 916
[    0.331451] gpiochip_add: registered GPIOs 916 to 947 on device: smp2p
[    0.331589] gpiochip_find_base: found new base at 884
[    0.331680] gpiochip_add: registered GPIOs 884 to 915 on device: smp2p
[    0.331715] gpiochip_find_base: found new base at 852
[    0.331803] gpiochip_add: registered GPIOs 852 to 883 on device: slave-kernel
[    0.331904] gpiochip_find_base: found new base at 852
[    0.331986] gpiochip_add: registered GPIOs 852 to 883 on device: master-kernel
[    0.336911] msm_rpm_log_probe: OK
[    0.337731] of_get_named_gpiod_flags: parsed 'qcom,gpio-proxy-unvote' property of node '/soc/qcom,mss@4080000[0]' - status (-517)
[    0.338753] of_get_named_gpiod_flags: can't parse 'qcom,tx-gpio' property of node '/soc/uart@78b1000[0]'
[    0.338766] uart_tx_gpio is not available
[    0.338776] of_get_named_gpiod_flags: can't parse 'qcom,rx-gpio' property of node '/soc/uart@78b1000[0]'
[    0.338784] uart_rx_gpio is not available
[    0.338794] of_get_named_gpiod_flags: can't parse 'qcom,cts-gpio' property of node '/soc/uart@78b1000[0]'
[    0.338801] uart_cts_gpio is not available
[    0.338811] of_get_named_gpiod_flags: can't parse 'qcom,rfr-gpio' property of node '/soc/uart@78b1000[0]'
[    0.338818] uart_rfr_gpio is not available
[    0.339345] sps: BAM device 0x07884000 is not registered yet.
[    0.339620] sps:BAM 0x07884000 is registered.
[    0.341775] 78b1000.uart: ttyHS0 at MMIO 0x78b1000 (irq = 151, base_baud = 460800) is a MSM HS UART
[    0.343639] msm_serial_hs module loaded
[    0.344007] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
[    0.344044] AXI: get_pdata(): Error: Client name not found
[    0.344053] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
[    0.344062] msm_serial_hsl_probe: Bus scaling is disabled
[    0.344191] 78b3000.serial: ttyHSL0 at MMIO 0x78b3000 (irq = 153, base_baud = 460800) is a MSM
[    0.344542] msm_serial_hsl_init: driver initialized
[    0.358411] brd: module loaded
[    0.361024] loop: module loaded
[    0.362639] [Max][DTR]  [quectel_power_manager_probe:391] 
[    0.362733] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/quec,quectel-power-manager[0]' - status (0)
[    0.362746] [Max][DTR] quectel_dt_parse_gpio_info: cnt: 0, gpio[dtr] = 5
[    0.362766] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/quec,quectel-power-manager[1]' - status (0)
[    0.362778] [Max][DTR] quectel_dt_parse_gpio_info: cnt: 1, gpio[wakeup_in] = 25
[    0.362801] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/quec,quectel-power-manager[2]' - status (0)
[    0.362812] [Max][DTR] quectel_dt_parse_gpio_info: cnt: 2, gpio[sleep_ind] = 42
[    0.362822] [Max][DTR] quectel_power_manager_probe: find dtr: 5 
[    0.362829] [Max][DTR] quectel_power_manager_probe: find wakeup_in: 25 
[    0.362837] [Max][DTR] quectel_power_manager_probe: find sleep_ind: 42 
[    0.363061] [Max][DTR] quectel_power_manager_probe: OK ###############################
[    0.363328] i2c-core: driver [tabla-i2c-core] using legacy suspend method
[    0.363338] i2c-core: driver [tabla-i2c-core] using legacy resume method
[    0.363453] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
[    0.363462] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
[    0.363565] i2c-core: driver [tasha-i2c-core] using legacy suspend method
[    0.363573] i2c-core: driver [tasha-i2c-core] using legacy resume method
[    0.363746] SCSI Media Changer driver v0.25 
[    0.367443] sps: BAM device 0x07984000 is not registered yet.
[    0.367718] sps:BAM 0x07984000 is registered.
[    0.367738] msm_nand_bam_init: msm_nand_bam_init: BAM device registered: bam_handle 0xceafbc00
[    0.367951] sps:BAM 0x07984000 (va:0xd09a0000) enabled: ver:0x18, number of pipes:7
[    0.369930] msm_nand_parse_smem_ptable: Parsing partition table info from SMEM
[    0.369972] msm_nand_parse_smem_ptable: SMEM partition table found: ver: 4 len: 16
[    0.369999] msm_nand_version_check: nand_major:1, nand_minor:5, qpic_major:1, qpic_minor:5
[    0.370038] msm_nand_scan: NAND Id: 0x2690ac2c Buswidth: 8Bits Density: 512 MByte
[    0.370148] msm_nand_scan: pagesize: 4096 Erasesize: 262144 oobsize: 224 (in Bytes)
[    0.370157] msm_nand_scan: BCH ECC: 8 Bit
[    0.370171] msm_nand_scan: CFG0: 0x290409c0,           CFG1: 0x08045d5c
[    0.370171]             RAWCFG0: 0x2b8401c0,        RAWCFG1: 0x0005055d
[    0.370171]           ECCBUFCFG: 0x00000203,      ECCBCHCFG: 0x42040d10
[    0.370171]           RAWECCCFG: 0x42000d11, BAD BLOCK BYTE: 0x00000175
[    0.370193] Creating 16 MTD partitions on "7980000.nand":
[    0.370206] 0x000000000000-0x000000280000 : "sbl" 
[    0.370922] 0x000000280000-0x000000500000 : "mibib" 
[    0.371481] 0x000000500000-0x000001b00000 : "efs2" 
[    0.372041] 0x000001b00000-0x000002500000 : "sys_rev" 
[    0.372602] 0x000002500000-0x000002800000 : "tz" 
[    0.373176] 0x000002800000-0x000002b00000 : "rpm" 
[    0.373748] 0x000002b00000-0x000002e00000 : "aboot" 
[    0.374326] 0x000002e00000-0x000003800000 : "boot" 
[    0.374909] 0x000003800000-0x000004880000 : "scrub" 
[    0.375513] 0x000004880000-0x0000098c0000 : "modem" 
[    0.376071] 0x0000098c0000-0x000009bc0000 : "misc" 
[    0.376621] 0x000009bc0000-0x00000a5c0000 : "recovery" 
[    0.377163] 0x00000a5c0000-0x00000b9c0000 : "fota" 
[    0.377740] 0x00000b9c0000-0x00000d7c0000 : "recoveryfs" 
[    0.378319] 0x00000d7c0000-0x000013bc0000 : "sys_back" 
[    0.378899] 0x000013bc0000-0x000020000000 : "system" 
[    0.379492] msm_nand_probe: NANDc phys addr 0x7980000, BAM phys addr 0x7984000, BAM IRQ 164
[    0.379504] msm_nand_probe: Allocated DMA buffer at virt_addr 0xcf844000, phys_addr 0x8f844000
[    0.381895] PPP generic driver version 2.4.2
[    0.383141] cnss_configure_ramdump: ramdump addr: d2c00000, phys: 0x87a00000 subsys:'AR6320'
[    0.383501] subsys-restart: subsys_set_state(): [cf044000]: subsys_set_state 1
[    0.383563] cnss_sdio 87a00000.qcom,cnss-sdio: CNSS SDIO Driver registered
[    0.384071] msm_otg 78d9000.usb: msm_otg probe
[    0.384267] of_get_named_gpiod_flags: can't parse 'qcom,hub-reset-gpio' property of node '/soc/usb@78d9000[0]'
[    0.384280] of_get_named_gpiod_flags: can't parse 'qcom,sw-sel-gpio' property of node '/soc/usb@78d9000[0]'
[    0.384315] of_get_named_gpiod_flags: parsed 'qcom,usbid-gpio' property of node '/soc/usb@78d9000[0]' - status (0)
[    0.384335] of_get_named_gpiod_flags: can't parse 'qcom,hsusb-otg-vddmin-gpio' property of node '/soc/usb@78d9000[0]'
[    0.386080] msm_otg 78d9000.usb: OTG regs = d08ee000
[    0.388188] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.388506] ehci-msm: Qualcomm On-Chip EHCI Host Controller
[    0.388829] usbcore: registered new interface driver cdc_acm
[    0.388838] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    0.388918] usbcore: registered new interface driver usb-storage
[    0.388963] usbcore: registered new interface driver ums-alauda
[    0.389006] usbcore: registered new interface driver ums-cypress
[    0.389048] usbcore: registered new interface driver ums-datafab
[    0.389090] usbcore: registered new interface driver ums-freecom
[    0.389131] usbcore: registered new interface driver ums-isd200
[    0.389173] usbcore: registered new interface driver ums-jumpshot
[    0.389214] usbcore: registered new interface driver ums-karma
[    0.389256] usbcore: registered new interface driver ums-onetouch
[    0.389297] usbcore: registered new interface driver ums-sddr09
[    0.389349] usbcore: registered new interface driver ums-sddr55
[    0.389393] usbcore: registered new interface driver ums-usbat
[    0.389446] usbcore: registered new interface driver usb_ehset_test
[    0.390646] gbridge_init: gbridge_init successs.
[    0.392096] qcom,qpnp-rtc qpnp-rtc-cf30ea00: rtc core: registered qpnp_rtc as rtc0
[    0.392346] i2c /dev entries driver
[    0.393036] unable to find DT imem DLOAD mode node
[    0.393325] unable to find DT imem EDLOAD mode node
[    0.393566] unable to find DT imem dload-type node
[    0.396381] msm_otg 78d9000.usb: phy_reset: success
[    0.414812] Bluetooth: HCI UART driver ver 2.2
[    0.414827] Bluetooth: HCI H4 protocol initialized
[    0.414836] Bluetooth: HCI_IBS protocol initialized
[    0.414967] of_get_named_gpiod_flags: parsed 'qca,bt-reset-gpio' property of node '/bt_qca6174[0]' - status (0)
[    0.414981] bt_dt_parse_vreg_info: qca,bt-vdd-core: is not provided in device tree
[    0.415025] bt_power bt_qca6174: no qca,bt-vdd-pa-voltage-level property
[    0.415035] bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree
[    0.415045] bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
[    0.415871] sdhci: Secure Digital Host Controller Interface driver
[    0.415883] sdhci: Copyright(c) Pierre Ossman
[    0.415895] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.416318] sdhci_msm 7824900.sdhci: sdhci_msm_probe: ICE device is not enabled
[    0.416344] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/soc/sdhci@7824900[0]'
[    0.416365] sdhci_msm 7824900.sdhci: No vreg data found for vdd
[    0.416536] sdhci_msm 7824900.sdhci: sdhci_msm_pm_qos_parse_irq: error -22 reading irq cpu
[    0.416548] sdhci_msm 7824900.sdhci: sdhci_msm_pm_qos_parse: PM QoS voting for IRQ will be disabled
[    0.416561] sdhci_msm 7824900.sdhci: sdhci_msm_pm_qos_parse: PM QoS voting for cpu group will be disabled
[    0.419001] sdhci_msm 7824900.sdhci: sdhci_msm_probe: sdiowakeup_irq = 354
[    0.419359] sdhci_msm 7824900.sdhci: No vmmc regulator found
[    0.419372] sdhci_msm 7824900.sdhci: No vqmmc regulator found
[    0.419719] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 32-bit ADMA in legacy mode
[    0.448402] sdhci_msm 7864900.sdhci: sdhci_msm_probe: ICE device is not enabled
[    0.448423] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/soc/sdhci@07864900[0]'
[    0.448678] sdhci_msm 7864900.sdhci: sdhci_msm_pm_qos_parse_irq: error -22 reading irq cpu
[    0.448690] sdhci_msm 7864900.sdhci: sdhci_msm_pm_qos_parse: PM QoS voting for IRQ will be disabled
[    0.448704] sdhci_msm 7864900.sdhci: sdhci_msm_pm_qos_parse: PM QoS voting for cpu group will be disabled
[    0.455863] sdhci_msm 7864900.sdhci: No vmmc regulator found
[    0.455880] sdhci_msm 7864900.sdhci: No vqmmc regulator found
[    0.456247] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 32-bit ADMA in legacy mode
[    0.485495] usbcore: registered new interface driver usbhid
[    0.485507] usbhid: USB HID core driver
[    0.486860] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
[    0.487468] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
[    0.487807] coresight-fuse a601c.fuse: QPDI fuse not specified
[    0.487895] coresight-fuse a601c.fuse: Fuse initialized
[    0.490894] coresight-csr 6001000.csr: CSR initialized
[    0.494779] coresight-tmc 6026000.tmc: Byte Counter feature enabled
[    0.495208] sps:BAM 0x06084000 is registered.
[    0.495457] coresight-tmc 6026000.tmc: TMC initialized
[    0.495744] coresight-tmc 6025000.tmc: TMC initialized
[    0.497229] nidnt boot config: 0
[    0.498006] coresight-tpiu 6020000.tpiu: NIDnT on SDCARD only mode
[    0.498130] coresight-tpiu 6020000.tpiu: TPIU initialized
[    0.499184] coresight-replicator 6024000.replicator: REPLICATOR initialized
[    0.499695] coresight-stm 6002000.stm: STM initialized
[    0.500312] coresight-hwevent 606c000.hwevent: Hardware Event driver initialized
[    0.501492] @Ramos Qstart_init entry !!!
[    0.501793] [Max][SMEM] qsmem_init running: misc_register return 0
[    0.501810] [Sunyd]==========>>[SMD] qsmd_init running...
[    0.504308] sps:BAM 0x078c4000 is registered.
[    0.504357] IPA HW is not supported on this target
[    0.514794] msm-compr-dsp soc:qcom,msm-compr-dsp: msm_compr_probe: dev name soc:qcom,msm-compr-dsp
[    0.516424] msm_pcm_probe: dev name soc:qcom,msm-voice-host-pcm
[    0.521180] mdm9607-asoc-tomtom soc:sound: ASoC: platform (null) not registered
[    0.521511] Netfilter messages via NETLINK v0.30.
[    0.521581] nf_conntrack version 0.5.0 (2478 buckets, 9912 max)
[    0.521970] ctnetlink v0.93: registering with nfnetlink.
[    0.522268] ip_set: protocol 6
[    0.522627] ip_tables: (C) 2000-2006 Netfilter Core Team
[    0.522784] arp_tables: (C) 2002 David S. Miller
[    0.522819] TCP: cubic registered
[    0.523292] NET: Registered protocol family 10
[    0.524260] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    0.524476] sit: IPv6 over IPv4 tunneling driver
[    0.525026] NET: Registered protocol family 17
[    0.525107] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    0.525141] Bridge firewalling registered
[    0.525156] Ebtables v2.0 registered
[    0.526143] NET: Registered protocol family 27
[    0.528297] gpiochip_find_base: found new base at 852
[    0.528411] gpiochip_add: registered GPIOs 852 to 883 on device: slave-kernel
[    0.528640] gpiochip_find_base: found new base at 820
[    0.528740] gpiochip_add: registered GPIOs 820 to 851 on device: master-kernel
[    0.529156] of_get_named_gpiod_flags: parsed 'qcom,gpio-proxy-unvote' property of node '/soc/qcom,mss@4080000[0]' - status (0)
[    0.529796] of_get_named_gpiod_flags: parsed 'qcom,gpio-err-fatal' property of node '/soc/qcom,mss@4080000[0]' - status (0)
[    0.529815] of_get_named_gpiod_flags: parsed 'qcom,gpio-err-ready' property of node '/soc/qcom,mss@4080000[0]' - status (0)
[    0.529828] of_get_named_gpiod_flags: parsed 'qcom,gpio-stop-ack' property of node '/soc/qcom,mss@4080000[0]' - status (0)
[    0.529843] of_get_named_gpiod_flags: parsed 'qcom,gpio-force-stop' property of node '/soc/qcom,mss@4080000[0]' - status (0)
[    0.529858] of_get_named_gpiod_flags: parsed 'qcom,gpio-shutdown-ack' property of node '/soc/qcom,mss@4080000[0]' - status (0)
[    0.532139] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
[    0.533732] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/qcom,smp2pgpio_test_smp2p_15_in[0]' - status (0)
[    0.533796] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/qcom,smp2pgpio_test_smp2p_15_out[0]' - status (0)
[    0.533847] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/qcom,smp2pgpio_test_smp2p_1_in[0]' - status (0)
[    0.533897] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/qcom,smp2pgpio_test_smp2p_1_out[0]' - status (0)
[    0.612246] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
[    0.612570] ubi0: attaching mtd15
[    1.300899] ubi0: scanning is finished
[    1.307269] ubi0: attached mtd15 (name "system", size 196 MiB)
[    1.307283] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
[    1.307292] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
[    1.307301] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192
[    1.307310] ubi0: good PEBs: 785, bad PEBs: 0, corrupted PEBs: 0
[    1.307318] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
[    1.307328] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1361646696
[    1.307337] ubi0: available PEBs: 0, total reserved PEBs: 785, PEBs reserved for bad PEB handling: 40
[    1.307361] ubi1: attaching mtd9
[    1.320105] ubi0: background thread "ubi_bgt0d" started, PID 124
[    1.587794] ubi1: scanning is finished
[    1.593614] ubi1: attached mtd9 (name "modem", size 80 MiB)
[    1.593628] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
[    1.593637] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
[    1.593646] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192
[    1.593654] ubi1: good PEBs: 321, bad PEBs: 0, corrupted PEBs: 0
[    1.593663] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.593673] ubi1: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 162890607
[    1.593682] ubi1: available PEBs: 0, total reserved PEBs: 321, PEBs reserved for bad PEB handling: 40
[    1.593720] RNDIS_IPA module is loaded.
[    1.594361] file system registered
[    1.594449] mbim_init: initialize 1 instances
[    1.594533] mbim_init: Initialized 1 ports
[    1.594752] ubi1: background thread "ubi_bgt1d" started, PID 125
[    1.596377] rndis_qc_init: initialize rndis QC instance
[    1.596673] Number of LUNs=8
[    1.596687] Mass Storage Function, version: 2009/09/11
[    1.596699] LUN: removable file: (no medium)
[    1.596719] Number of LUNs=1
[    1.596793] LUN: removable file: (no medium)
[    1.596802] Number of LUNs=1
[    1.597085] android_usb gadget: android_usb ready
[    1.597099] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
[    1.597146] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
[    1.597160] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_UDC_STARTED_EVENT received
[    1.597783] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
[    1.598245] qcom,qpnp-rtc qpnp-rtc-cf30ea00: setting system clock to 1970-01-01 00:01:17 UTC (77)
[    1.599384] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
[    1.601087] parse_legacy_cluster_params(): Ignoring cluster params
[    1.601103] ------------[ cut here ]------------
[    1.601121] WARNING: CPU: 0 PID: 1 at /home/becking/9X07_V/EC25_V/MDM9x07/MCU_R02/apps_proc/oe-core/build/tmp-glibc/work-shared/mdm9607-perf/kernel-source/drivers/cpuidle/lpm-levels-of.c:739 parse_cluster+0xb48/0xcac()
[    1.601129] Modules linked in:
[    1.601143] CPU: 0 PID: 1 Comm: swapper Not tainted 3.18.20 #1
[    1.601171] [<c001312c>] (unwind_backtrace) from [<c0011380>] (show_stack+0x10/0x14)
[    1.601188] [<c0011380>] (show_stack) from [<c001c1e0>] (warn_slowpath_common+0x68/0x88)
[    1.601202] [<c001c1e0>] (warn_slowpath_common) from [<c001c290>] (warn_slowpath_null+0x18/0x20)
[    1.601216] [<c001c290>] (warn_slowpath_null) from [<c03b2c30>] (parse_cluster+0xb48/0xcac)
[    1.601231] [<c03b2c30>] (parse_cluster) from [<c03b0250>] (lpm_probe+0xc/0x1ec)
[    1.601246] [<c03b0250>] (lpm_probe) from [<c025b104>] (platform_drv_probe+0x30/0x7c)
[    1.601263] [<c025b104>] (platform_drv_probe) from [<c0259950>] (driver_probe_device+0xb8/0x1dc)
[    1.601278] [<c0259950>] (driver_probe_device) from [<c0259b20>] (__driver_attach+0x68/0x8c)
[    1.601293] [<c0259b20>] (__driver_attach) from [<c025821c>] (bus_for_each_dev+0x6c/0x90)
[    1.601308] [<c025821c>] (bus_for_each_dev) from [<c02591a0>] (bus_add_driver+0xe0/0x1c8)
[    1.601322] [<c02591a0>] (bus_add_driver) from [<c025a350>] (driver_register+0x9c/0xe0)
[    1.601338] [<c025a350>] (driver_register) from [<c0a46b28>] (lpm_levels_module_init+0x14/0x38)
[    1.601353] [<c0a46b28>] (lpm_levels_module_init) from [<c00088f0>] (do_one_initcall+0xf8/0x1a0)
[    1.601368] [<c00088f0>] (do_one_initcall) from [<c0a20d30>] (kernel_init_freeable+0xf0/0x1b0)
[    1.601384] [<c0a20d30>] (kernel_init_freeable) from [<c06d87b8>] (kernel_init+0x10/0x1dc)
[    1.601399] [<c06d87b8>] (kernel_init) from [<c000dce0>] (ret_from_fork+0x14/0x34)
[    1.601408] ---[ end trace b1a68bbeb03c7033 ]---
[    1.601438] WARNING: CPU: 0 PID: 1 at /home/becking/9X07_V/EC25_V/MDM9x07/MCU_R02/apps_proc/oe-core/build/tmp-glibc/work-shared/mdm9607-perf/kernel-source/drivers/cpuidle/lpm-levels-of.c:739 parse_cluster+0xb48/0xcac()
[    1.601446] Modules linked in:
[    1.601457] CPU: 0 PID: 1 Comm: swapper Tainted: G        W      3.18.20 #1
[    1.601472] [<c001312c>] (unwind_backtrace) from [<c0011380>] (show_stack+0x10/0x14)
[    1.601486] [<c0011380>] (show_stack) from [<c001c1e0>] (warn_slowpath_common+0x68/0x88)
[    1.601499] [<c001c1e0>] (warn_slowpath_common) from [<c001c290>] (warn_slowpath_null+0x18/0x20)
[    1.601513] [<c001c290>] (warn_slowpath_null) from [<c03b2c30>] (parse_cluster+0xb48/0xcac)
[    1.601526] [<c03b2c30>] (parse_cluster) from [<c03b0250>] (lpm_probe+0xc/0x1ec)
[    1.601539] [<c03b0250>] (lpm_probe) from [<c025b104>] (platform_drv_probe+0x30/0x7c)
[    1.601553] [<c025b104>] (platform_drv_probe) from [<c0259950>] (driver_probe_device+0xb8/0x1dc)
[    1.601568] [<c0259950>] (driver_probe_device) from [<c0259b20>] (__driver_attach+0x68/0x8c)
[    1.601582] [<c0259b20>] (__driver_attach) from [<c025821c>] (bus_for_each_dev+0x6c/0x90)
[    1.601596] [<c025821c>] (bus_for_each_dev) from [<c02591a0>] (bus_add_driver+0xe0/0x1c8)
[    1.601610] [<c02591a0>] (bus_add_driver) from [<c025a350>] (driver_register+0x9c/0xe0)
[    1.601625] [<c025a350>] (driver_register) from [<c0a46b28>] (lpm_levels_module_init+0x14/0x38)
[    1.601639] [<c0a46b28>] (lpm_levels_module_init) from [<c00088f0>] (do_one_initcall+0xf8/0x1a0)
[    1.601652] [<c00088f0>] (do_one_initcall) from [<c0a20d30>] (kernel_init_freeable+0xf0/0x1b0)
[    1.601666] [<c0a20d30>] (kernel_init_freeable) from [<c06d87b8>] (kernel_init+0x10/0x1dc)
[    1.601679] [<c06d87b8>] (kernel_init) from [<c000dce0>] (ret_from_fork+0x14/0x34)
[    1.601687] ---[ end trace b1a68bbeb03c7034 ]---
[    1.601704] /soc/qcom,lpm-levels/qcom,pm-cluster@0: No CPU phandle, assuming single cluster
[    1.602659] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
[    1.604308] qcom,cc-debug-mdm9607 1800000.qcom,debug: Registered Debug Mux successfully
[    1.604900] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
[    1.605337] emac_lan_vreg: disabling
[    1.605351] rome_vreg: disabling
[    1.605359] sdcard_ext_vreg: disabling
[    1.605390] mem_acc_corner: disabling
[    1.605407] clock_late_init: Removing enables held for handed-off clocks
[    1.606971] ALSA device list:
[    1.606982]   No soundcards found.
[    1.607078] Warning: unable to open an initial console.
[    1.620132] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 131
[    1.658147] UBIFS (ubi0:0): recovery needed
[    1.830135] UBIFS (ubi0:0): recovery completed
[    1.830215] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" 
[    1.830227] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
[    1.830238] UBIFS (ubi0:0): FS size: 63741952 bytes (60 MiB, 251 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs)
[    1.830247] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
[    1.830260] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID F2A052C8-E1B3-4486-B70C-FF316E333D48, small LPT model
[    1.832661] VFS: Mounted root (ubifs filesystem) on device 0:12.
[    1.833080] Freeing unused kernel memory: 288K (c0a20000 - c0a68000)
[    1.833094] @Ramos<A1><A1>Kernel command line: noinitrd  rw console=ttyHSL0,115200,n8 androidboot.hardware=qcom ehci-hcd.park=3 msm_rtb.filter=0x37 lpm_levels.sleep_disabled=1  earlycon=msm_hsl_uart,0x78b3000  androidboot.serialno=313a01a5 androidboot.baseband=msm rootfstype=ubifs rootflags=bulk_read root=ubi0:rootfs ubi.mtd=15 ubi.mtd=9
[    1.936329] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "modem", R/O mode
[    1.936347] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
[    1.936359] UBIFS (ubi1:0): FS size: 67805184 bytes (64 MiB, 267 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs)
[    1.936368] UBIFS (ubi1:0): reserved for root: 0 bytes (0 KiB)
[    1.936380] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID C3F2EA6E-08D9-4423-9FED-EC943F9D938C, small LPT model
[    1.938752] quectel_mount_success 
[    1.938770] subsys-restart: __subsystem_get(): Changing subsys fw_name to modem
[    1.953526] pil-q6v5-mss 4080000.qcom,mss: modem: loading from 0x82a00000 to 0x87a00000
[    1.980423] pil-q6v5-mss 4080000.qcom,mss: Debug policy not present - msadp. Continue.
[    1.981161] pil-q6v5-mss 4080000.qcom,mss: Loading MBA and DP (if present) from 0x8f900000 to 0x8fa00000
[    2.028098] pil-q6v5-mss 4080000.qcom,mss: MBA boot done
[    6.224857] pil-q6v5-mss 4080000.qcom,mss: modem: Brought out of reset
[    6.324991] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
[    6.326369] pil-q6v5-mss 4080000.qcom,mss: Subsystem error monitoring/handling services are up
[    6.326423] pil-q6v5-mss 4080000.qcom,mss: modem: Power/Clock ready interrupt received
[    6.326657] M-Notify: General: 7
[    6.326697] subsys-restart: subsys_set_state(): [cf044000]: subsys_set_state 1
[    6.326714] @Ramos kernel_init try_to_run_init_process entry !!!!
[    6.326714] 
[    6.343697] @Ramos kernel_init try_to_run_init_process EXIT 11111
[    6.343697] 
[    6.529466] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
[    6.530777] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
[    6.530964] diag: In diag_send_feature_mask_update, control channel is not open, p: 0, c0beb5e8
[    6.532821] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
[    6.548058] apr_tal:Modem Is Up
[    6.548921] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
[    7.260205] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 185
[    7.260873] [Max][USB_DEF_ID_CHECK] quec_usb_pid exists!
[    7.283278] [Max][USB_DEF_ID_CHECK] quec_usb_vid exists!
[    7.283392] [Max][USB_DEF_ID_CHECK] USB ID in fs: pid is 0125 && pid is 2C7C
[    7.334697] enable_store: android_usb: already disabled
[    7.344229] UBIFS (ubi0:1): recovery needed
[    7.501159] read descriptors
[    7.501182] read strings
[    7.684348] UBIFS (ubi0:1): recovery completed
[    7.684432] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "usrfs" 
[    7.684444] UBIFS (ubi0:1): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
[    7.684455] UBIFS (ubi0:1): FS size: 61456384 bytes (58 MiB, 242 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs)
[    7.684464] UBIFS (ubi0:1): reserved for root: 0 bytes (0 KiB)
[    7.684477] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID A146802F-27F5-47D6-9E76-DE8EB380B587, small LPT model
[    8.485649] QCMAP:start
[    8.500590] QTI:start
[    8.979570] USB QCMAP NL IOCTL Snd GETNEIGH Succ
[    8.990684] enter rt5616_modinit
[    8.990759] enter rt5616_i2c_probe
[    9.055270] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICEMMODE1_DL --> VoiceMMode1 --> SEC_MI2S_RX_Voice Mixer
[    9.055289] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICEMMODE1_DL -> VoiceMMode1 -> SEC_MI2S_RX_Voice Mixer
[    9.055324] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICEMMODE2_DL --> VoiceMMode2 --> SEC_MI2S_RX_Voice Mixer
[    9.055335] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICEMMODE2_DL -> VoiceMMode2 -> SEC_MI2S_RX_Voice Mixer
[    9.082276] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICE2_STUB_DL --> Voice2 Stub --> INTERNAL_BT_SCO_RX_Voice Mixer
[    9.082296] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICE2_STUB_DL -> Voice2 Stub -> INTERNAL_BT_SCO_RX_Voice Mixer
[    9.083284] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for SENARY_MI2S_TX
[    9.083296] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route BE_IN -> direct -> SENARY_MI2S_TX
[    9.094961] ------------[ cut here ]------------
[    9.094995] WARNING: CPU: 0 PID: 410 at /home/becking/9X07_V/EC25_V/MDM9x07/MCU_R02/apps_proc/oe-core/build/tmp-glibc/work-shared/mdm9607-perf/kernel-source/net/netfilter/nf_queue.c:35 nf_register_queue_handler+0x28/0x38()
[    9.095004] Modules linked in: snd_soc_alc5616
[    9.095021] CPU: 0 PID: 410 Comm: sh Tainted: G        W      3.18.20 #1
[    9.095048] [<c001312c>] (unwind_backtrace) from [<c0011380>] (show_stack+0x10/0x14)
[    9.095065] [<c0011380>] (show_stack) from [<c001c1e0>] (warn_slowpath_common+0x68/0x88)
[    9.095079] [<c001c1e0>] (warn_slowpath_common) from [<c001c290>] (warn_slowpath_null+0x18/0x20)
[    9.095094] [<c001c290>] (warn_slowpath_null) from [<c057ebb8>] (nf_register_queue_handler+0x28/0x38)
[    9.095110] [<c057ebb8>] (nf_register_queue_handler) from [<c0598e30>] (proc_sip_segment+0x38/0x54)
[    9.095126] [<c0598e30>] (proc_sip_segment) from [<c0120930>] (proc_sys_call_handler+0x98/0xb4)
[    9.095142] [<c0120930>] (proc_sys_call_handler) from [<c012095c>] (proc_sys_write+0x10/0x18)
[    9.095156] [<c012095c>] (proc_sys_write) from [<c00d4f48>] (vfs_write+0xb8/0x170)
[    9.095168] [<c00d4f48>] (vfs_write) from [<c00d53b8>] (SyS_write+0x40/0x80)
[    9.095182] [<c00d53b8>] (SyS_write) from [<c000dc40>] (ret_fast_syscall+0x0/0x38)
[    9.095191] ---[ end trace b1a68bbeb03c7035 ]---
[    9.171020] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: mux SLIM_0_RX AANC MUX has no paths
[    9.188056] enter rt5616_probe
[    9.188079] alc5616-codec 2-001b: func: rt5616_reset, reset codec 
[    9.188201] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0x7 (ok)
[    9.188418] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.190357] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000010
[    9.210555] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000010
[    9.210836] alc5616-codec 2-001b: func: rt5616_reg_init, init codec 
[    9.210929] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x091343c8 OPER:0x00000090
[    9.211045] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.211155] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.211287] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.211415] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.211538] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.211661] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.211781] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.211902] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.212021] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.212141] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.212261] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.212380] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.212505] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx)
 bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.212625] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.212745] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.212863] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.212983] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.213128] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.213267] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.213412] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.213552] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.213693] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.213836] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.213979] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.214120] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.214263] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.214406] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.214546] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.214688] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.214828] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.214967] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.215108] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.215248] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.215391] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.215532] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.215676] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.215816] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.215958] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.216099] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.216238] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.216378] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.216534] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.216677] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.219293] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-dtmf-tx: ASoC: no sink widget found for STUB_DTMF_TX
[    9.219314] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-dtmf-tx: ASoC: Failed to add route DTMF TX -> direct -> STUB_DTMF_TX
[    9.219372] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-capture-tx: ASoC: no sink widget found for STUB_HOST_RX_CAPTURE_TX
[    9.219387] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-capture-tx: ASoC: Failed to add route CS-VOICE HOST RX CAPTURE -> direct -> STUB_HOST_RX_CAPTURE_TX
[    9.219436] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-playback-rx: ASoC: no source widget found for STUB_HOST_RX_PLAYBACK_RX
[    9.219448] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-playback-rx: ASoC: Failed to add route STUB_HOST_RX_PLAYBACK_RX -> direct -> CS-VOICE HOST RX PLAYBACK
[    9.219497] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-capture-tx: ASoC: no sink widget found for STUB_HOST_TX_CAPTURE_TX
[    9.219510] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-capture-tx: ASoC: Failed to add route CS-VOICE HOST TX CAPTURE -> direct -> STUB_HOST_TX_CAPTURE_TX
[    9.219556] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-playback-rx: ASoC: no source widget found for STUB_HOST_TX_PLAYBACK_RX
[    9.219569] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-playback-rx: ASoC: Failed to add route STUB_HOST_TX_PLAYBACK_RX -> direct -> CS-VOICE HOST TX PLAYBACK
[    9.244443] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.247326] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx)
 bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.247449] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x011363c8 OPER:0x00000090
[    9.247555] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0113e3c8 OPER:0x00000090
[    9.247665] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x091343c8 OPER:0x00000090
[    9.247771] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x091343c8 OPER:0x00000090
[    9.247874] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x091343c8 OPER:0x00000090
[    9.248009] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x091343c8 OPER:0x00000090
[    9.248146] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x091343c8 OPER:0x00000090
[    9.248284] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x091383c8 OPER:0x00000090
[    9.248454] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
[    9.822921] subsys-restart: state_show(): [cac93180]: state ONLINE
[    9.832372] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
[    9.865276] embms:start/load
[   10.068967] msm_thermal:set_enabled enabled = 0
[   10.185132] msm_otg 78d9000.usb: Avail curr from USB = 100
[   10.185477] android_work: android_work: did not send uevent (0 0   (null))
[   10.252490] subsys-restart: quec_state_show(): [cad20b00]: line: 216, quectel_restart_modem: 0
[   10.255758] android_work: android_work: sent uevent USB_STATE=CONNECTED
[   10.260697] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
[   10.359722] android_work: android_work: sent uevent USB_STATE=CONNECTED
[   10.371389] android_usb gadget: high-speed config #1: 86000c8.android_usb
[   10.371440] diag: USB channel diag connected
[   10.371652] msm_otg 78d9000.usb: Avail curr from USB = 500
[   10.372047] gbam_connect_work: gbam_connect_work: Bam channel is not ready
[   10.432191] android_work: android_work: sent uevent USB_STATE=CONFIGURED
[   10.475471] sps:BAM 0x04044000 is registered.
[   10.475673] sps:BAM 0x04044000 (va:0xd18e0000) enabled: ver:0x27, number of pipes:6
[   11.086196] random: lighttpd urandom read with 39 bits of entropy available
[   11.382939] QCMAP:Start DHCP server
[   11.420189] [Max][SMEM][qsmem_unlocked_ioctl][200] OK! QSMEM_IOCTL_SET_RDY_STATE: successful to copy data to user[qsmem_ready_state=1,pre_state=0]
[   11.420220] [Max][SMEM] find SMEM_ID_VENDOR1 OK when qsmem ready notification has come
[   11.420266] [Max][SMEM] qsmem_write over! res=0
[   11.420283] [Max][SMEM] qsmem_read wait - begin
[   11.614159] QCMAP:DHCP server started
[   11.622946] QCMAP:DHCP server started
[   11.843212] QCMAP:Init Complete
[   11.920129] [Max][SMEM] [qsmem_poll_timer_cb:110] Status=[A],AliveTime=0,condition=0
[   11.926788] eMBMs Tunneling Module:start
[   12.347910] Shortcut_FE_IPV4:start/load
[   12.394494] Shortcut_FE_IPV6:start/load
[   12.398979] gser_suspend: Un-supported transport: TTY
[   12.399035] msm_otg 78d9000.usb: Avail curr from USB = 2
[   12.399064] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received
[   12.399130] android_work: android_work: sent uevent USB_STATE=SUSPENDED
[   12.420137] [Max][SMEM] [qsmem_poll_timer_cb:110] Status=[M],AliveTime=1,condition=0
[   12.420171] [Max][SMEM] qsmem_poll_timer_cb:121 Modem Msg received.
[   12.420243] [Max][SMEM] qsmem_read wait end and del time![r=0]
[   12.457623] [Max][USB_DEF_ID_CHECK] get usb id from modem: pid=0x125, vid=0x2C7C
[   12.466277] [Max][SMEM] qsmem_write over! res=0
[   12.466302] [Max][SMEM] qsmem_read wait - begin
[   12.467023] Shortcut_FE_CM:start/load
[   12.701102] [Max][USB_DEF_ID_CHECK] cur usb id: pid is 0125,vid is 2C7C
[   12.701212] [Max][USB_DEF_ID_CHECK] test usb id: pid's 0125,vid is 2C7C
[   12.701307] [Max][USB_DEF_ID_CHECK] B_USB_ORG=[lrwxrwxrwx    1 root     root            27 Aug 27  2016 /sbin/usb/boot_hsusb_composition -> /sbin/usb/compositions/9025]
[   12.701528] [Max][USB_DEF_ID_CHECK] USB ID is still defined by Quectel! So check it...
[   12.701703] [Max][USB_DEF_ID_CHECK] test usb PID is the same with cur usb id
[   12.701770] [Max][USB_DEF_ID_CHECK] test usb VID is the same with cur usb id
[   12.746250] afe_debug_open: debug intf afe_loop_gain
[   12.746354] afe_debug_write: afe_loop_gain 4109 2
[   12.960134] [Max][SMEM] [qsmem_poll_timer_cb:110] Status=[A],AliveTime=0,condition=0
[   13.006333] subsys-restart: state_show(): [ca828580]: state ONLINE
[   13.188159] subsys-restart: state_show(): [cae5a100]: state ONLINE
[   13.200330] QTI_PPP:start
[   13.460125] [Max][SMEM] [qsmem_poll_timer_cb:110] Status=[M],AliveTime=1,condition=0
[   13.460156] [Max][SMEM] qsmem_poll_timer_cb:121 Modem Msg received.
[   13.460222] [Max][SMEM] qsmem_read wait end and del time![r=0]
[   13.542972] [Max][SMEM] QUECTEL_MODEM_SMEM_INIT_CMP has recved 1 time
[   13.586088] mbimd: Proc start
[   13.624645] mbim_open: Open mbim driver
[   13.624660] mbim_open: Lock mbim_dev->open_excl for open
[   13.624668] mbim_open: USB cable not connected
[   13.624675] mbim_open: Exit, mbim file opened
[   13.830631] [Max][DTR][(null):-1066321201] smd_open_ret = 193
[   13.830703] [Max][DTR]  [dtr_notify:165] event=2
[   13.830712] [Max][DTR] DTR SMD EVENT OPEN
[   13.830765] [Max][DTR]  [dtr_notify:165] event=4
[   13.830796] [Max][DTR] dtr_devp->flag=-1,value = 1,cbits_to_modem = 0,~cbits_to_modem = -1 func = send_data_to_smd
[   14.045105] msm_otg 78d9000.usb: USB in low power mode
[   18.613861] USB QCMAP NL IOCTL Snd GETNEIGH Succ
[   18.704247] USB QCMAP NL IOCTL Snd GETNEIGH Succ
[   33.530408] random: nonblocking pool is initialized
[   43.580662] ------------[ cut here ]------------
[   43.580730] WARNING: CPU: 0 PID: 0 at /home/becking/9X07_V/EC25_V/MDM9x07/MCU_R02/apps_proc/oe-core/build/tmp-glibc/work-shared/mdm9607-perf/kernel-source/net/core/dev.c:3413 netif_rx_internal+0x4c/0x248()
[   43.580745] Cloned packet from dev bridge0
[   43.580760] Modules linked in: shortcut_fe_cm(O) shortcut_fe_ipv6(O) shortcut_fe(O) embms_kernel(O) snd_soc_alc5616
[   43.580805] CPU: 0 PID: 0 Comm: swapper Tainted: G        W  O   3.18.20 #1
[   43.580856] [<c001312c>] (unwind_backtrace) from [<c0011380>] (show_stack+0x10/0x14)
[   43.580886] [<c0011380>] (show_stack) from [<c001c1e0>] (warn_slowpath_common+0x68/0x88)
[   43.580910] [<c001c1e0>] (warn_slowpath_common) from [<c001c22c>] (warn_slowpath_fmt+0x2c/0x3c)
[   43.580935] [<c001c22c>] (warn_slowpath_fmt) from [<c0558f80>] (netif_rx_internal+0x4c/0x248)
[   43.580960] [<c0558f80>] (netif_rx_internal) from [<c05592c0>] (netif_rx_ni+0x8c/0xf4)
[   43.580982] [<c05592c0>] (netif_rx_ni) from [<c05593e0>] (dev_loopback_xmit+0xb8/0xc4)
[   43.581009] [<c05593e0>] (dev_loopback_xmit) from [<c060d6bc>] (ip6_finish_output2+0xe0/0x4dc)
[   43.581039] [<c060d6bc>] (ip6_finish_output2) from [<c062bcfc>] (igmp6_send+0x30c/0x51c)
[   43.581067] [<c062bcfc>] (igmp6_send) from [<c062d35c>] (igmp6_timer_handler+0x2c/0x6c)
[   43.581097] [<c062d35c>] (igmp6_timer_handler) from [<c0052010>] (call_timer_fn+0x84/0x17c)
[   43.581124] [<c0052010>] (call_timer_fn) from [<c0052718>] (run_timer_softirq+0x25c/0x2a8)
[   43.581150] [<c0052718>] (run_timer_softirq) from [<c001ec08>] (__do_softirq+0x124/0x2e4)
[   43.581175] [<c001ec08>] (__do_softirq) from [<c001f038>] (irq_exit+0x80/0xdc)
[   43.581201] [<c001f038>] (irq_exit) from [<c00476bc>] (__handle_domain_irq+0x78/0x90)
[   43.581226] [<c00476bc>] (__handle_domain_irq) from [<c00086cc>] (gic_handle_irq+0x38/0x50)
[   43.581250] [<c00086cc>] (gic_handle_irq) from [<c0011d40>] (__irq_svc+0x40/0x74)
[   43.581266] Exception stack(0xc0a69ef0 to 0xc0a69f38)
[   43.581285] 9ee0:                                     00000139 00000000 00000866 000003e8
[   43.581306] 9f00: 00000001 c0a68038 8d4fdf3b 83126e97 00000001 c0add118 2595a0f5 0000000a
[   43.581325] 9f20: 00000000 c0a69f38 c00583dc c03b18fc 00000013 ffffffff
[   43.581353] [<c0011d40>] (__irq_svc) from [<c03b18fc>] (lpm_cpuidle_enter+0x3f4/0x420)
[   43.581379] [<c03b18fc>] (lpm_cpuidle_enter) from [<c03add68>] (cpuidle_enter_state+0xb8/0x254)
[   43.581408] [<c03add68>] (cpuidle_enter_state) from [<c003f434>] (cpu_startup_entry+0x1d8/0x2ac)
[   43.581439] [<c003f434>] (cpu_startup_entry) from [<c0a20bd4>] (start_kernel+0x32c/0x398)
[   43.581456] ---[ end trace b1a68bbeb03c7036 ]---

iptables

root@mdm9607-perf:/sbin# iptables --version
iptables v1.4.12.1

reboot

root@mdm9607-perf:/sbin# cat ./reboot-recovery
#! /bin/sh

echo 2 > /etc/reboot-cookie
reboot
root@mdm9607-perf:/sbin# cat ./reboot-bootloader
#! /bin/sh

echo 1 > /etc/reboot-cookie
reboot

Modem Firmware Images

root@mdm9607-perf:/firmware# find .
.
./image
./image/qwlan.bin
./image/mba.b00
./image/mba.b01
./image/mba.b02
./image/mba.b03
./image/mba.b04
./image/mba.b05
./image/mba.mbn
./image/mba.mdt
./image/tfbtnv11.bin
./image/otp.bin
./image/bdwlan.bin
./image/tfbtfw11.tlv
./image/modem.b00
./image/modem.b01
./image/modem.b02
./image/modem.b03
./image/modem.b05
./image/modem.b06
./image/modem.b07
./image/modem.b08
./image/modem.b09
./image/modem.b10
./image/modem.b11
./image/modem.b12
./image/modem.b13
./image/modem.b14
./image/modem.b15
./image/modem.b16
./image/modem.b19
./image/modem.b20
./image/modem.b21
./image/modem.b22
./image/modem.b23
./image/modem.b24
./image/modem.mdt
./image/athwlan.bin
./image/utf.bin
./image/utf30.bin
./image/fakeboar.bin
./image/qwlan30.bin
./image/qca61x4.bin

USB debugger??

root@mdm9607-perf:/sbin/usb/debuger# cat debugFiles 
_______________________________________
1       msm_otg
_______________________________________
2       ci13xxx_udc
_______________________________________
3       ci13xxx_msm
_______________________________________
4       f_gps
_______________________________________
5       f_mbim
_______________________________________
6       f_qc_ecm
_______________________________________
7       f_qc_rndis
_______________________________________
8       f_rmnet
_______________________________________
9       f_tcm
_______________________________________
10      u_bam
_______________________________________
11      u_bam_data
_______________________________________
12      usb_bam
_______________________________________
13      android
_______________________________________
14      composite
_______________________________________
15      ehci-msm-hsic
_______________________________________
16      u_qc_ether
_______________________________________
root@mdm9607-perf:/sbin/usb/debuger# cat help 
usb_debug:
        Bash script for enable or disable debug message from usb related files.
Usage:
        usb_debug [status]
        usb_debug [flag] [Operation] [As Default?] [Arg....]
status:
        show list of the active files (enable debug messaged)
flag:
        -l,     read files name from argument list. here Arg is file name (without suffix ".c")
        -f,     read filenames from Arg, here Arg is path to a file that contain list of filenames
                (each name without suffix ".c")
        all,    enable or disable debug messages from all the files in debugFiles
                (the files that the script support)
Operation:
        on,      enable debug message
        off,     disable debug message
As Default:
        y/n     enable debug messages from these files also in next power cycle?
                - set these files as default debug configuration?

*** important notes ***
1) You can always use the manual interface. Just usb_debug with no param.
2) Each default setting is overrides the previous one.
3) To insert or delete files, you have to edit debugFiles manually,
   add a new line with number(Fid) and file name (without suffix ".c").
4) debugFiles path: on target   usr/bin/usb/debuger/debugFiles
                    GIT         system/core/usb/debuger/debugFiles
5)TIP: to set the files that active now as defult use: usb_debug -f on y usr/bin/usb/debuger/statusFile

Partitions

root@mdm9607-perf:/proc# cat partitions 
major minor  #blocks  name

  31        0       2560 mtdblock0
  31        1       2560 mtdblock1
  31        2      22528 mtdblock2
  31        3      10240 mtdblock3
  31        4       3072 mtdblock4
  31        5       3072 mtdblock5
  31        6       3072 mtdblock6
  31        7      10240 mtdblock7
  31        8      16896 mtdblock8
  31        9      82176 mtdblock9
  31       10       3072 mtdblock10
  31       11      10240 mtdblock11
  31       12      20480 mtdblock12
  31       13      30720 mtdblock13
  31       14     102400 mtdblock14
  31       15     200960 mtdblock15
Add picture from clipboard (Maximum size: 48.8 MB)