General

Profile

tsaitgaist

  • Registered on: 02/07/2016
  • Last connection: 11/06/2018

Issues

Projects

Activity

11/06/2018

04:37 PM SIMtrace 2 Bug #3683 (New): no reset after DFU flash
the SIMtracev2 board does not reset/go into the application after DFU flashing
- check if dfu-utils signals upload c...

10/25/2018

09:14 AM SIMtrace 2 Bug #1704 (In Progress): test/port card emulation firmware for SAM3S based SIMtrace2
resumed to continue osmo-remsim work
09:12 AM SIMtrace 2 Bug #3379 (Stalled): documentation on how to use SIMtrace2
will be carried again once the cardemu firmware is also available for the simtrace hardware
07:30 AM Osmocom Conferences (OsmoDevCon + OsmoCon) Feature #3545 (Resolved): video recording @ OsmoCon 2018
all presentations to be recorded according to the schedule have been recorded and released (https://media.ccc.de/c/os...

10/01/2018

02:02 PM Osmocom Conferences (OsmoDevCon + OsmoCon) Feature #3545: video recording @ OsmoCon 2018
installation is planned on 17th in the evening.
I will need a short intro about cutting from Bjoern (c3voc), which s...

09/07/2018

06:07 PM SIMtrace 2 Feature #1706: Hardware / Circuit board update for SAM3S based SIMtrace2
laforge wrote:
> So if Kevin cannot accept/tolerate TC-2050, then we should either go for edge-launch, or for
> a c...

09/06/2018

09:41 PM SIMtrace 2 Feature #1706: Hardware / Circuit board update for SAM3S based SIMtrace2
mschramm wrote:
> Another option would be an edge connector, which is as cheap as a Tagconnect footprint, and it mai...
12:01 PM SIMtrace 2 Feature #1706: Hardware / Circuit board update for SAM3S based SIMtrace2
the SAM4S doesn't fully work out of the box.
what works:
- serial output
- USB enumeration of the trace firmware...

09/03/2018

06:47 PM SIMtrace 2 Bug #3504 (Resolved): wformat and long printing
format issue fixed in https://git.osmocom.org/simtrace2/commit/?id=29200c62237594e9ce1d82e1f60298e9f0878e62
higher b...

08/29/2018

07:26 AM SIMtrace 2 Feature #1706: Hardware / Circuit board update for SAM3S based SIMtrace2
laforge wrote:
> yes, we do have even one or two re-worked SIMtrace2 boards with the
> SAM4S, I think one of it is ...

Also available in: Atom

Add picture from clipboard (Maximum size: 48.8 MB)