General

Profile

spaar

  • Registered on: 02/18/2016
  • Last connection: 11/15/2017

Issues

Projects

Activity

03/28/2017

05:56 PM Osmocom Conferences (OsmoDevCon + OsmoCon) Wiki edit: OsmoDevCon2017 (#33)

11/27/2016

04:50 PM OsmocomTETRA Revision 158270f4 (osmotetra): normalize_fn(): Fix computation of frame numbers
A copy+paste mistake resulted in the calculation of wrong frame numbers
in normalize_fn().

02/19/2016

10:48 PM OsmocomBB Wiki edit: L1A_L23_Interface (#2)
the payload is 23 bytes !?!

10/12/2012

02:22 PM libosmo-abis Revision 08c10325 (libosmoabis): Make sure sync header was fully received
The sync header consists of 16 zero-bits followed by 1 one-bit. Before,
subchan_demux only tested for the 16 zero-bit...

10/08/2012

07:36 PM libosmo-abis Revision b9ba61a4 (libosmoabis): Make sure sync header was fully received
Some BTS seem to send more than 16 zero bits at the beginning of a
frame, so to be sure synchronisation is achieved w...

08/21/2011

08:49 AM libosmo-abis Revision aa494244 (libosmoabis): TRAU: Properly initialize idle frames
This is particularly important in case of the Nokia BTS, as they seem
to drop the RF/signalling channel if they don't...

12/12/2010

02:46 PM OsmocomBB Revision d2b13fce (osmocombb): Add mandatory routeing area IE to SUSPEND-NACK
02:46 PM libosmocore Revision d2b13fce (libosmocore): Add mandatory routeing area IE to SUSPEND-NACK

09/28/2010

06:04 AM OsmocomBB Revision 78704ca3 (osmocombb): target/dsp: Add dsp audio initialization
Written-by: Dieter Spaar <spaar@mirider.augusta.de>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
06:04 AM OsmocomBB Revision f4bbb30f (osmocombb): target/dsp: Adjust dsp parameters for TCH FR Codec
Written-by: Dieter Spaar <spaar@mirider.augusta.de>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>

Also available in: Atom

Add picture from clipboard (Maximum size: 48.8 MB)