Cellular Network Infrastructure » Radio Access Network » OsmoBSC

While looking into OML traces between osmo-bsc and osmo-bts the wireshark displays NSVC link configuration different than the osmo-bsc is configured. osmo-bts works as osmo-bsc is configured.

The question:
Is only wireshark wrong, but ipa nanobts, osmo-bts, osmo-bsc works as expected?
or
Does wireshark and ipa nanobts have a different understanding than osmo-bts and osmo-bsc?

Please test with osmo-bsc with a ip.access nanobts and configure different local and remote udp ports and see if it works.

e.g. bsc config:

network
 bts 0
[..]
  gprs nsei 102
  gprs nsvc 0 nsvci 102
  gprs nsvc 0 local udp port 23100
  gprs nsvc 0 remote ip 192.168.1.44
  gprs nsvc 0 remote udp port 23000
  gprs nsvc 1 nsvci 202
  gprs nsvc 1 local udp port 23102
  gprs nsvc 1 remote ip 192.168.1.44
  gprs nsvc 1 remote udp port 23001

Wireshark will display local udp port and remote udp port switched in the OML obj (0xf2, 0x0, 0x0), PDU IPA Set Attributes.