Bug #4856
Updated by keith over 3 years ago
It has been noticed that at times osmo-bts, osmo-pcu are up and running on a sysmobts, GPRS is configured but there is no NS connection to the SGSN. What I don't have about this: * A method to reproduce. * logs leading up to failure. * I don't know if the NS was up and failed, or if it never came up on pcu startup. * osmo-bts and pcu are not current master, if fact there are some various versions installed.. (BSC is nitb) As I am writing this, I have one case of running osmo-pcu with no connection. pcu is not logging ANYTHING. (logging level set-all debug) version: OsmoPCU 0.8.0.152-b90d show stats: all counters are zero. ntib shows all of the "states" *Oper 'Enabled', Admin 'Unlocked', Avail 'OK'* as does the associated -pcu- osmo-bts pcu also, shows PCU connected: <pre> OpenBSC# show bts 2 BTS 2 is of sysmobts type in band GSM850, has CI 2 LAC 269, BSIC 63 (NCC=7, BCC=7) and 1 TRX Description: (null) PCU version 0.8.0.152-b90d connected </pre> To possibly simplify a little: It seems to be that the PCU is in a states where it "knows" that the NS is down <pre> OsmoPCU# show ns Encapsulation NS-UDP-IP Local IP: 0.0.0.0, UDP Port: 0 </pre> yet it it not trying to bring it up. Maybe the bts did not inform the PCU of the config? show bts statistics: also all counters at ZERO. all rate-counters are zero. really looks like it was never initialised. Maybe needless to say, but worth adding - systemctl restart osmo-pcu restores service.