Filter Replacement » History » Revision 11
Revision 10 (nion, 02/19/2016 10:48 PM) → Revision 11/12 (Anonymous, 02/19/2016 10:48 PM)
== Motorola filter replacement ==
In order to use the phone as a passive uplink sniffer, you will have to remove and replace the RX filters.
To replace filters on Motorola phones you will need:
* [http://search.digikey.com/scripts/DkSearch/dksus.dll?vendor=0&keywords=HHM1526 HHM1526]
* [http://search.digikey.com/scripts/DkSearch/dksus.dll?vendor=0&keywords=HHM1523C1 HHM1523C1]
* [http://search.digikey.com/scripts/DkSearch/dksus.dll?vendor=0&keywords=04025A150JAT2A 04025A150JAT2A]
* [http://search.digikey.com/scripts/DkSearch/dksus.dll?vendor=0&keywords=04025A220JAT2A 04025A220JAT2A]
As the shipping cost for such a small-quantity order is relatively high, a complete component kit is
available for online order from http://shop.sysmocom.de/products/osmocombb-filter-kit
=== Remove existing baluns ===
First you will need to remove existing balun:
[[Image(motorola_filter_replacement_step_1_low.jpg, 250px)]]
[[Image(motorola_filter_replacement_step_2_low.jpg, 250px)]]
=== Solder new baluns ===
Clean up the phone and solder HHM1526 and HHM1523C1 on the right places (the black dot goes up):
[[Image(motorola_filter_replacement_step_3_low.jpg, 250px)]]
[[Image(motorola_filter_replacement_step_4_low.jpg, 250px)]]
[[Image(motorola_filter_replacement_step_5_low.jpg, 250px)]]
=== Solder ceramic capacitors ===
Last step is to solder ceramic capacitors 04025A150JAT2A and 04025A220JAT2A:
[[Image(motorola_filter_replacement_step_6_low.jpg, 250px)]]
[[Image(motorola_filter_replacement_step_7_low.jpg, 250px)]]
=== Credits ===
Thanks to [http://246tnt.com/gsm/rx_filter.html Sylvain] and Peter who made this possible.