MotorolaC140 » History » Revision 7
Revision 6 (Anonymous, 02/19/2016 10:48 PM) → Revision 7/15 (Anonymous, 02/19/2016 10:48 PM)
= Motorola C140 =
The internal name of the hardware is E86
[[Image(c140_front.jpg)]]
[[Image(c140_battery_compartment.jpg)]]
The shielding covers of this model are soldered, not snap-on :(
== Specification ==
* GSM 900 / GSM 1800 dual-band
* 101 x 47,8 x 21,9 mm, 80 grams
* 920mAh Li-Ion battery
* TI Calypso/Iota/Rita chipset
== Schematics ==
The schematics can be found e.g. at http://files.shrak-mobile.com/schem/motorola/C139_schem.rar. They apply to C139 as well as C140, as they are very similar.
== Hardware ==
[[Image(Motorola_c140_board_pcb.jpg, 500px)]]
'''GSM Chipset:'''
* DBB: TI Calypso Baseband, D751749ZHH model (Calypso Lite G2), includes 256kBytes of internal SRAM
* ABB: TI TWL3025BZ
* RF: TRF6151CJ
* RF PA: SKY77325-12
'''Flash / SRAM:'''
* Intel (RD38F)1010C0ZTLO
* Stacked-CSP Flash Stacked Memory (32MBit flash, 4MBit SRAM, Advanced Boot Block Flash Memory, 3.0V I/O, Top Blocking)
'''Display:'''
* Toppoly TD014THEA3 (1.4 inch LCD, 96 x 64, 64K colors)
* Controller: Unknown (integrated?)
'''Test points:'''
* Test points surrounding Iota:
* Test points surrounding Calypso:
* Test points accessible from battery compartment:
== Miscellaneous ==
=== Bootloader ===
The loader is pretty much identical to the loader in the C123. However, it has one additional nastiness:
* After the download has completed, it expects the magic string "1003" (0x31 0x30 0x30 0x33) at the RAM address 0x803ce0
* Use the osmoload model-switch "-m c140/c140xor" and upload the [wiki:Bootloader], and use osmoload to load the application (e.g layer1.osmoload.bin)