OsmocomBB Firmware » History » Revision 13
Revision 12 (fixeria, 01/21/2019 02:33 AM) → Revision 13/17 (fixeria, 01/21/2019 02:33 AM)
h1. Background {{>toc}} The [[OsmocomBB]] source code comes with several applications for various purposes. Those applications can be devided into two separate classes, applications: * running on the baseband chip of the phone * running on a PC, communicating with the baseband firmware over serial Applications running on the PC can further be partitioned into: * Firmware management software (loading, flashing, ...) * GSM Layer 2/3 applications The following will provide you a rough overview of the most commonly used software pieces. h1. Baseband firmware Binary location: src/target/firmware/board/*/*.bin Source locations: src/target/firmware/, particularly apps and layer1 h2. layer1 [[layer1bin]] is a simple GSM layer 1 proxy, communicating over the [[L1A_L23_Interface]]. This allows you to run a full-blown GSM implementation on your host machine, communicating through the phones radio interface. h2. loader [[loaderbin]] is our flash loader, dumper and second stage bootloader h2. l1test (deprecated) Layer 1 development application. This application does what layer1 does, but automatically tunes to the strongest ARFCN it can find. It can be used for stand-alone-testing of the phones radio. h2. loader Our [[Bootloader]], available in various build configurations. h2. compal_dsp_dump Application for dumping the contents of the DSP in the Calypso chip. h2. compal_dumper (deprecated) The old Compal compal device dumper. Use compal_dsp_dump instead. [[Bootloader]] instead once it is available. h2. hello_world The initial obligatory "Hello, world!" application. Currently, this does more than say hello. Intended as a template for new applications. h2. menu Boot menu application to select and load apps that are stored in flash memory. See [[flashing_new]]. h2. rssi The [blog:rssi-firmware] can be used to monitor the received signal indication (RSSI) of ARFCNs or the entire spectrum. h2. EMI The EMI (electro magnetic interference) simulator application can be used to generate RF interference caused by GSM networks an mobile station. See [[emi-firmware]]. h1. Firmware management software Location (source and binary): src/host/osmocon h2. osmocon [[osmocon]] is a console tool for interfacing our baseband firmware on the phone with applications on the host PC. It is responsible for downloading a baseband firmware or bootloader into the phone and relay communication between Layer 3 applications and baseband firmwares over serial. h2. osmoload [[osmoload]] is used to write, dump and examine flash memory of supported phones. You will need this program for example if you intent [[flashing]] an application to the phone (the software is usually loaded into RAM). h2. calypso_pll The [[calypso_pll]] tool can be used to calculate Calypso DPLL multiplier+divider. h2. rita_pll The [[rita_pll]] tool can be used to calculate the Rita PLL multiplier/divider.