PotentialCalypsoTargets » History » Revision 10
Revision 9 (Anonymous, 02/19/2016 10:48 PM) → Revision 10/19 (Anonymous, 02/19/2016 10:49 PM)
h3. === Potential Calypso Targets === There are several unsupported phones, which might be able to run osmocomBB with (minor) modifications * Compal ** * Motorola C157 (only sold in China) ** * Motorola C119 (should work out of the box, but is untested) ** * Motorola V170 (should work out of the box as well, untested) ** * Motorola E365 (first Calypso-based phone that Compal made for Motorola) * Chi-Mei ** * Motorola C168 (Si4210-X-GM [[AeroII]] AeroII Transceiver, RF3166 PA) ** * Motorola W220 (Silabs Aero II, romloader via [[HardwareSerialCable]] [wiki:Hardware/SerialCable] works) ** "Motorola MPX220":http://www.steve-m.de/pictures/mpx220_baseband.jpg * [http://www.steve-m.de/pictures/mpx220_baseband.jpg Motorola MPX220] (strange Hitachi? transceiver/PA) * Pirelli (supported by now) ** [[PirelliDPL10|Pirelli DP-L10]], * [wiki:PirelliDPL10 Pirelli DP-L10], also comes as ** * Arcor Twintel DP-L10 and ** * Telekom TC300 (all three have a TRF6151 transceiver) * Sendo ** * Sendo S330 (currently unsupported Silabs Aero I/I+ GSM transceiver) ** * Sendo SV663 (Aero I) * Alcatel ** * E359 (TRF6151, secure romloader in flash) * BenQ/Siemens ** "BenQ-Siemens A38":http://steve-m.de/pictures/benq_a38.jpg * [http://steve-m.de/pictures/benq_a38.jpg BenQ-Siemens A38] (Calypso romloader works, HP155165BPEB transceiver, RF3166 PA) ** * Siemens CFX65 (transceiver unknown) * Sagem M62 series phones (myX-1, "myX-1 trio":http://www.dustos.org/pictures/sagem_myx-1-trio.jpg, "myX2-2":http://www.dustos.org/pictures/sagem_myx2-2.jpg, "myX-7":http://www.dustos.org/pictures/sagem_myx-7.jpg, [http://www.dustos.org/pictures/sagem_myx-1-trio.jpg myX-1 trio], [http://www.dustos.org/pictures/sagem_myx2-2.jpg myX2-2], [http://www.dustos.org/pictures/sagem_myx-7.jpg myX-7], myX100, "my201x":http://steve-m.de/pictures/sagem_my201x.jpg [http://steve-m.de/pictures/sagem_my201x.jpg my201x] to name a few) ** * tons of them, all have an Aero II transceiver, and loading custom code is only possible via (not yet figured out) JTAG ** * have some custom ASIC (no datasheet) which drives speaker, melody, includes voltage regulators
