DUL 20 » History » Version 12
laforge, 11/03/2020 03:24 PM
add toc
1 | 12 | laforge | {{>toc}} |
---|---|---|---|
2 | |||
3 | 1 | laforge | h1. DUL 20 |
4 | |||
5 | 5 | roh | DUL is a Digital Unit for LTE. It contains the eNodeB function down to the baseband processing. |
6 | 1 | laforge | |
7 | {{thumbnail(DUL20_01_front_complete.jpg, size=900)}} |
||
8 | |||
9 | 7 | roh | {{>toc}} |
10 | |||
11 | 1 | laforge | h2. Connectors |
12 | |||
13 | h3. PWR |
||
14 | 7 | roh | |
15 | 1 | laforge | 48V DC connector. The negative rail is towards the edge of the unit. Also seems to power up fine at 36V |
16 | |||
17 | 9 | laforge | The connectory type is https://www.te.com/usa-en/product-1982299-3.html with associated crimp contacts. |
18 | |||
19 | 8 | roh | {{thumbnail(DUL20_01_DC_in_detail.jpg, size=400)}} |
20 | |||
21 | 1 | laforge | h3. GPS (RJ45) |
22 | |||
23 | Connection for an Ericsson GPS module, contains 1PPS and UART signals |
||
24 | |||
25 | 8 | roh | {{thumbnail(DUL20_01_LMTA_GPS_detail.jpg, size=400)}} |
26 | |||
27 | 1 | laforge | h3. EC (RJ45) |
28 | |||
29 | Environment Control? Probably some RS-485 to control fans, power management, UPS, ... |
||
30 | |||
31 | h3. AUX (RJ45) |
||
32 | |||
33 | ? |
||
34 | |||
35 | h3. LMT A (RJ45) |
||
36 | |||
37 | A RS-232 on RJ45 for Local Maintenane use. IT provides access to COLI (COmmand LIne). |
||
38 | |||
39 | 10 | laforge | The pinout is shown below. Please note it is *different from RBS3000!*, but identical to that of the [[DUG 20]] |
40 | 1 | laforge | |
41 | |_.RJ45|_.DB9|_.Name| |
||
42 | 3 | laforge | |1|5|GND| |
43 | |2|3|TXD (of PC)| |
||
44 | 1 | laforge | |3|2|RXD (of PC)| |
45 | |||
46 | 10 | laforge | The [default?] baud rate settings are 9600 8N1. |
47 | |||
48 | This port provides RS-232 access to the [[OSE]] shell |
||
49 | 1 | laforge | |
50 | h3. LMT B (RJ45) |
||
51 | |||
52 | _Site LAN_ Ethernet, for adminstrative purpose |
||
53 | |||
54 | 11 | laforge | This is the interface used for configuration of the DUL during installation. |
55 | |||
56 | 8 | roh | {{thumbnail(DUL20_01_LED_TNA_LMTB_detail.jpg, size=400)}} |
57 | |||
58 | 1 | laforge | h3. TN A (RJ45) |
59 | |||
60 | _Transmission_ Ethernet, i.e. the back-haul interface for S1. RJ-45 |
||
61 | |||
62 | h3. TN B (SFP) |
||
63 | |||
64 | _Transmission_ Ethernet for optical back-haul. Can use normal SFP modules. |
||
65 | |||
66 | 8 | roh | {{thumbnail(DUL20_01_TNB_IDL_detail.jpg, size=400)}} |
67 | |||
68 | 1 | laforge | h3. IDL (HSIO) |
69 | |||
70 | Inter-DU-Link for cross-connecting multiple DU. |
||
71 | |||
72 | 4 | tnt | h3. RI A..F (SFP) |
73 | 1 | laforge | |
74 | Radio Interface (CPRI) using either SFP transceivers for RRU connection or copper interconnect cables for RU. |
||
75 | 8 | roh | |
76 | {{thumbnail(DUL20_01_SFP_detail.jpg, size=400)}} |
||
77 | |||
78 | h2. Overview Pictures |
||
79 | |||
80 | {{thumbnail(DUL20_01_front_perspective.jpg, size=400)}} |
||
81 | {{thumbnail(DUL20_01_left_perspective.jpg, size=400)}} |
||
82 | {{thumbnail(DUL20_01_right_perspective.jpg, size=400)}} |
||
83 | {{thumbnail(DUL20_01_back_perspective.jpg, size=400)}} |
||
84 | {{thumbnail(DUL20_01_bottom_complete.jpg, size=400)}} |
||
85 | 1 | laforge | |
86 | 2 | laforge | h2. Accessing it |
87 | |||
88 | h3. SSH via LMT-B |
||
89 | |||
90 | It appears the DUL will always respond to 169.254.1.10/16, no matter what kind of real/other IP address has been set. |
||
91 | |||
92 | You have to use the following SSH config to speak the ancient cipher/key-exchange: |
||
93 | <pre> |
||
94 | Host dul |
||
95 | HostName 169.254.1.10 |
||
96 | KexAlgorithms diffie-hellman-group1-sha1 |
||
97 | Ciphers 3des-cbc |
||
98 | </pre> |
||
99 | |||
100 | and then log in as the 'rbs' user with 'rbs' password. |