DUL 20 » History » Revision 6
« Previous |
Revision 6/15
(diff)
| Next »
roh, 05/13/2020 07:36 PM
- Table of contents
- DUL 20
DUL 20¶
DUL is a Digital Unit for LTE. It contains the eNodeB function down to the baseband processing.
Connectors¶
PWR¶
48V DC connector. The negative rail is towards the edge of the unit. Also seems to power up fine at 36V
GPS (RJ45)¶
Connection for an Ericsson GPS module, contains 1PPS and UART signals
EC (RJ45)¶
Environment Control? Probably some RS-485 to control fans, power management, UPS, ...
AUX (RJ45)¶
?
LMT A (RJ45)¶
A RS-232 on RJ45 for Local Maintenane use. IT provides access to COLI (COmmand LIne).
The pinout is shown below. Please note it is different from RBS3000!
RJ45 | DB9 | Name |
---|---|---|
1 | 5 | GND |
2 | 3 | TXD (of PC) |
3 | 2 | RXD (of PC) |
The [default?] baud rate settings are 9600 8N1
LMT B (RJ45)¶
Site LAN Ethernet, for adminstrative purpose
TN A (RJ45)¶
Transmission Ethernet, i.e. the back-haul interface for S1. RJ-45
TN B (SFP)¶
Transmission Ethernet for optical back-haul. Can use normal SFP modules.
IDL (HSIO)¶
Inter-DU-Link for cross-connecting multiple DU.
RI A..F (SFP)¶
Radio Interface (CPRI) using either SFP transceivers for RRU connection or copper interconnect cables for RU.
Accessing it¶
SSH via LMT-B¶
It appears the DUL will always respond to 169.254.1.10/16, no matter what kind of real/other IP address has been set.
You have to use the following SSH config to speak the ancient cipher/key-exchange:
Host dul HostName 169.254.1.10 KexAlgorithms diffie-hellman-group1-sha1 Ciphers 3des-cbc
and then log in as the 'rbs' user with 'rbs' password.
Updated by roh about 4 years ago · 6 revisions