Version 3 - History - DUL Shell Commands - Ericsson RBS 6xxx - Open Source Mobile Communications

DUL Shell Commands » History » Version 3

laforge, 12/13/2020 05:51 PM

-laforge
+h1. DUL Shell Commands
-laforge
+{{>toc}}
 h2. @aaconfig@
 <pre>
 $ aaconfig
 SYNOPSIS
     aaconfig [-ttl <1-86400>] [-print]
 DESCRIPTION
     This command sets DNS TTL interval for all addresses in AA server list if there is(are) hostname(s).
     It can be used to print the (un)resolved hostname/address information
 OPTIONS
                        Without options or with wrong syntax help text is printed.
     -print             Print the unresolved, and resolved hostname-address information, and the DNS ttl time.
     -ttl <interval>    Sets resolve interval time in seconds. This does an address resolution and resets the
                        time to live timer for AA server DNS lookups.
 OPERANDS
+    -
 EXAMPLES
     aaconfig -ttl 3600
     aaconfig -print
 </pre>
 h2. @appbh info@
 <pre>
 $ appbh info
 CBM Board Handler Status Information
 APP Driver
 ==================================================
       driverId            = 4
       state               = ST_ACTIVATE
       stFault             = No
       hwFault             = No
       swFault             = No
       restartRank         = Cold
       loopVlanId          = 102
       endPointMac         = 02:00:01:02:00:01
       multicastMac        = 03:00:5e:00:11:12
 Board
 ==================================================
       productNumber       = KDU 137 533/4
       productRevision     = R1B
       productName         = DUL 20 01
       productDate         = 20110218
       serialNumber        = CB4G593134
 NPU
 ==================================================
       fileName            = /c/loadmodules_norepl/CXC1726213_R79X17
       fwProductNumber     = CXC 172 6213
       fwProductRevision   = R79X17
       chipName            = APP3342
       dataPlaneVersion    = -??-
 PBOOT Options
 ==================================================
       optNoNpuAliveTest   = False
       optNoHwFaultInd     = False
       optNoSwFaultInd     = False
       optNoNpuGwCellTest  = False
 </pre>
 h2. @arm print@
 <pre>
 $ arm print
 Content of the Armament file:
 ,1,KDU137533/4,*,1,1,CXC1729957_R79X22,10,0,0,0
 ,1,KDU137533/4,*,1,2,CXC1731080_R79X14,50,0,0,0
 ,1,KDU137533/4,*,1,3,CXC1732167_R79X11,68,0,0,0
 ,1,KDU137533/4,*,1,4,CXC1732204_R79X11,68,0,0,0
 ,1,KDU137533/4,*,1,5,CXC1732469_R79X13,100,0,0,0
 ,1,KDU137533/4,*,1,6,CXC1320781_R79X12,200,20000000,0,0
 ,1,KDU137533/4,*,1,7,CXC1327705_R79X08,200,0,0,0
 ,1,KDU137533/4,*,1,8,CXC1321315_R79X15,200,741888,0,0
 ,1,KDU137533/4,*,1,9,CXC1320787_R79X12,200,0,1200000,0
 ,1,KDU137533/4,*,1,10,CXC1321341_R79X12,200,0,0,0
 ,1,KDU137533/4,*,1,11,CXC1322506_R79X08,200,459000,0,0
 ,1,KDU137533/4,*,1,12,CXC1323464_R79X12,200,0,0,0
 ,1,KDU137533/4,*,1,13,CXC1325792_R79X13,200,0,0,0
 ,1,KDU137533/4,*,1,14,CXC1321314_R79X13,200,0,0,0
 ,1,KDU137533/4,*,1,15,CXC1320782_R79X16,200,1269600,1016388,0
 ,1,KDU137533/4,*,1,16,CXC1321316_R79X08,200,0,0,0
 ,1,KDU137533/4,*,1,17,CXC1329000%3_R12E01,250,0,0,0
 ,1,KDU137533/4,*,1,18,CXC1725398%16_R26X,250,0,0,0
 ,1,KDU137533/4,*,1,19,CXC1725422%1_R17AC03,250,0,0,0
 ,1,KDU137533/4,*,1,20,CXC1323891%2_R37S01,250,0,0,0
 ,1,KDU137533/4,*,1,21,CXC1732768%7_R23C,250,0,0,0
 ,1,KDU137533/4,*,1,22,CXC1732823%16_R26AX,250,0,0,0
 ,1,KDU137533/4,*,1,23,CXC1320784_R79X13,300,20000000,4100000,0
 ,1,KDU137533/4,*,1,24,CXC1323911_R79X17,300,0,3000000,0
 ,1,KDU137533/4,*,1,25,CXC1732821_R79X09,300,0,0,0
 ,1,KDU137533/4,*,1,26,CXC1721176_R79X12,300,0,0,0
 ,1,KDU137533/4,*,1,27,CXC1326054_R79X13,300,0,500000,0
 ,1,KDU137533/4,*,1,28,CXC1320783_R79X08,300,0,459000,0
 ,1,KDU137533/4,*,1,29,CXC1731354_R79X19,400,0,0,0
 ,1,KDU137533/4,*,1,30,CXC1727219_R79X32,400,0,0,0
 ,1,KDU137533/4,*,1,31,CXC1731081_R79X19,400,0,0,0
 ,1,KDU137533/4,*,1,32,CXC1728281_R79X09,400,0,0,0
 ,1,KDU137533/4,*,1,33,CXC1325240%1_R79X14,400,1341440,842015,0
 ,1,KDU137533/4,*,1,34,CXC1727220_R79X29,400,0,0,0
 ,1,KDU137533/4,*,1,35,CXC1321344_R79X08,400,0,0,0
 ,1,KDU137533/4,*,1,36,CXC1729153%7_R22N,500,0,0,0
 ,1,KDU137533/4,*,1,37,CXC1725191%16_R26Z,500,236444224,30000000,0
 ,1,KDU137533/4,*,1,38,CXC1720483_R79X08,500,0,0,0
 ,1,KDU137533/4,*,1,39,CXC1733444_R79X27,500,0,0,0
 ,1,KDU137533/4,*,1,40,CXC1725190%16_R26Z,500,70000000,10000000,0
 ,1,KDU137533/4,*,1,41,CXC1726088%16_R26Z,530,134274688,10000000,0
 Current LLP internal config: Board List
 Board loc: 0,1 isMp: 1
 product No: KDU137533/4, product Rev: *
 status: DEFINED
 noOfLm: 41
 noOfValidLmps: 1
 lmplist: 0,1
 Current LLP internal config: MP List
 Board loc: 0,1
 noOfLmpClients: 1, 0, 0, 0
 isLmp: 1
 LLP.LMID content: CXC1732469_R79X13 0 0 1 65535
 llpExecMode: Active
 llpAdmState: NORMAL
 </pre>
 h2. @bcm port@
 <pre>
 $ bcm port
 ----+----------+-----+------+------+-----------+-----------+---------------+------------------
 Port|Name      |Link |Speed |Duplex|Traffic    |Pause State|STP State      |Last Source Address
     |          |     |(Mbps)|      |  Tx |  Rx |  Tx |  Rx |               |
 ----+----------+-----+------+------+-----------+-----------+---------------+------------------
 | PQIII    |  Up | 1000 | Full |   E |   E |   D |   D | NoSpanningTree| 02:00:01:00:00:00
 | ATM_WP2  |Down | **** | **** | *** | *** | *** | *** | **************| *****************
 | APP3342  |  Up | 1000 | Full |   E |   E |   D |   D | NoSpanningTree| 02:00:01:02:00:01
 | BASEBAND1|  Up | 1000 | Full |   E |   E |   D |   D | NoSpanningTree| 00:00:00:00:00:00
 | DU LINK  |Down | **** | **** | *** | *** | *** | *** | **************| *****************
 | BASEBAND2|Down | **** | **** | *** | *** | *** | *** | **************| *****************
 | LOOPBACK |  Up | 1000 | Full |   E |   E |   D |   D | NoSpanningTree| 02:00:01:02:00:01
 | DEBUG    |Down | **** | **** | *** | *** | *** | *** | **************| *****************
 </pre>
 h2. @biosls@
 <pre>
 $ biosls
 : biosInstall
 : biosOpen
 : biosUninstall
 : biosRunlevel
 : biosList
 : MM
 : MMAN
 : ose
 : CACHE
 : RAMLOG
 : SYSPARAM
 : OSE_PTHREAD
 : RTC
 : HEAP
 : PM
 : CHPI_SERVICE
 : eriInit
 : BOARDPARAM
 : POOLEXT_BIOS_SERVICE
 : start_restart_mmi_if
 : Cs_trace_bios
 : traceAndErrorInit
 : UART
 : UART750
 : start_restart_lm_if
 : tinai
 : FCCETH
 : nlETSEC
 : DEVBUF
 : vlan
 : MDIO_ETSEC
 : I2C
 : SysEvlog
 : PCI
 : SRIOIO
 : SRIOMSG
 : boardManagerBiosEntry
 : HD_CLR_CFG
 : HD_READ
 : HD_WRITE
 : IRQ
 : ADI
 : CLS_MTC_DD_NAME
 : WEBS
 : Split Ethernet
 : OSENET
 : ecpx
 </pre>
 h2. @bl@
 <pre>
 $ bl
        bid name                           procs      segid
 x00020347 gcpu01024                         12 0x00000000
 x00020372 gcpu00768                         10 0x00000000
 x0002036a gcpu00512                         10 0x00000000
 x00020371 BXP_0_1                            2 0x00000000
 x00010385 gcpu00256                         10 0x00000000
 x0002037b WEBS Spawn                         1 0x000101e9
 x00010374 CelloIaci_telnetFtp_block          2 0x000101c7
 x00010326 BXPBlock                           8 0x0001016a
 x0001031c Ipom_httpsgwy                      2 0x000101c7
 x00010318 Osa_secAccess_block                1 0x000101c7
 x00040307 Ipom_split_Eth_server_block        1 0x000100dd
 x00010304 Ipom_split_Eth_client_block        1 0x00010138
 x000402ff ospi_CXC1321315_block              1 0x000100dd
 x000102e9 ose_sock_server_block              1 0x000100dd
 x000102e5 ose_inet_block                     3 0x000100dd
 x000302db prngd_block                        2 0x00010113
 x000302c3 CXC1726088%16_R26Z                21 0x000102c4
 x000102ae CXC1725190%16_R26Z                19 0x000102af
 x0002028e CXC1733444_R79X27                 59 0x0001028f
 x00020287 CXC1720483_R79X08                  4 0x00010288
 x00010271 CXC1725191%16_R26Z                19 0x00010272
 x0002025d CXC1729153%7_R22N                 18 0x0001025e
 x00010257 CXC1321344_R79X08                  3 0x00010258
 x0001024e CXC1727220_R79X29                  9 0x0001024f
 x00020249 CXC1325240%1_R79X14                8 0x00020248
 x00060237 CXC1728281_R79X09                 10 0x00010239
 x0001020f CXC1731081_R79X19                 38 0x00010210
 x000201fb CXC1727219_R79X32                 18 0x000101fc
 x000101f2 CXC1731354_R79X19                  7 0x000101f3
 x000201ef ose_webs_block                     2 0x000101e9
 x000101e8 CXC1320783_R79X08                  5 0x000101e9
 x000201e1 CXC1326054_R79X13                  4 0x000101e2
 x000201da CXC1721176_R79X12                  4 0x000101db
 x000101d2 CXC1732821_R79X09                  5 0x000101d3
 x000301c6 CXC1323911_R79X17                 17 0x000101c7
 x000601bc CXC1320784_R79X13                 72 0x000101bd
 x000901b0 CXC1732823%16_R26AX                9 0x000101b1
 x000201ac Ipom_dhcp_client_block             1 0x000100f6
 x0001019f CXC1732768%7_R23C                  9 0x000101a0
 x00020169 CXC1323891%2_R37S01               32 0x0001016a
 x0002015c CXC1725422%1_R17AC03              14 0x0001015d
 x00020150 CXC1725398%16_R26X                16 0x00010151
 x0002013e CXC1329000%3_R12E01               13 0x0001013f
 x00020137 CXC1321316_R79X08                  6 0x00010138
 x00020120 CXC1320782_R79X16                 24 0x00010121
 x00020112 CXC1321314_R79X13                 32 0x00010113
 x0001010b CXC1325792_R79X13                  6 0x0001010c
 x000200ff CXC1323464_R79X12                 10 0x00010100
 x000200f5 CXC1322506_R79X08                  9 0x000100f6
 x000200ee CXC1321341_R79X12                  4 0x000100ef
 x000200e4 CXC1320787_R79X12                  7 0x000100e5
 x000200dc CXC1321315_R79X15                 27 0x000100dd
 x000200d5 CXC1327705_R79X08                  3 0x000100d6
 x000600cc CXC1320781_R79X12                 16 0x000100cd
 x000100bf CXC1732469_R79X13                  9 0x000100c0
 x000200b9 ose_lh                             9 0x00000000
 x000100a8 CXC1732204_R79X11                  3 0x000100a9
 x000200a3 CXC1732167_R79X11                  4 0x000200a4
 x0001000e osemain                          175 0x00000000
 x00010008 main                               3 0x00000000
 x00010001 OSE                                9 0x00000000
 Total 61 blocks
 </pre>
 h2. @cell list@
 <pre>
 $ cell list
 ==================================================================================================
 cellId froId froType         ldn                  admState     opState      availabilityStatus
 ==================================================================================================
 0     117506048 (FDD) EUtranCellFDD=DFWe06 0 (LOCKED)   0 (DISABLED) 8 (OFF_LINE)
 1     117506048 (FDD) EUtranCellFDD=DFWe06 0 (LOCKED)   0 (DISABLED) 8 (OFF_LINE)
 2     117506048 (FDD) EUtranCellFDD=DFWe06 0 (LOCKED)   0 (DISABLED) 8 (OFF_LINE)
 </pre>
 h2. @cell list -cellId 1@
 <pre>
 $ cell data -cellId 1
 ===================================================================================
 RnhCellCtrlC in state <<machine>:TOP:Active:>
 cellId: 1
 froId: 0
 froType: 117506048
 State: LOCKED_IDLE(0)
 cellDownAuto: false
 cellDownMan: true
 isCellResourcesAllocated: false
 ispCause: 1
 licensedDlChannelBandwidth 0
 licensedUlChannelBandwidth: 0
 initialIspCause: 0
 isInternalReconfigure: false
 alarmOtherFaultId: 0
 alarmRaisedCellRangeBw: false
 alarmRaisedOther: false
 alarmRaisedSupportedCell: false
 ===================================================================================
 ===================================================================================
 RnhCellNodeAdmissionC in state <<machine>:TOP:Active:>
 Node info:
 totGbrThresholdDl=500000000 totAccGbrDl=0
 totGbrThresholdUl=500000000 totAccGbrUl=0
 Cell specific info:
 cellId=1124081774
 accGbrDl=4405174864871301238
 accGbrUl=5288389385228218469
 numGbrBearers=1634497893
-laforge
+isNodeAdmissionProxyPortAvailable=true
 ===================================================================================
 </pre>
 h2. @cv@
 <pre>
 $ cv help
 Create CV: cv mk <name> [id] [type] [puid] [operator] [comment]
 Remove CV: cv rm <name>
 Set as startable: cv set <name>
 List cv:s: cv ls
 Current usage: cv cu
 Set rollback init values: cv rbinit <status> <timer> <counter>
 - status  : 0=no_change, 1=rollback_on, 2=rollback_off
 - timer   : 0=no_change, 1-n minutes
 - counter : 0=no_change, 1-n
 Set first in rollback list: cv rbset <name>
 Remove from rollback list: cv rbrm <name>
 Set rollback counter: cv rbcnt <counter> , counter should be >=0
 Check if loaded cv is upgrade: cv up
 Clean up cv dir: cv clean <level>
 - level : 1=remove all cvs except one used by cv pointer.
 - level : 2=remove all cvs except one used by cv pointer & rollback list.
 - level : 3=remove all cvs on passive side that does not exist on active side.
 Synch from active to MP with given lnh name: cv synch <lnh>
 List upgrade cv: cv upls <upgrade package id>
 Remove upgrade cv: cv uprm <upgrade package id>
 Checksum cv: cv csum <name> <mode>
 - name: CV name to checksum files for
 - mode: active=active Core MP, passive=passive Core MP
 Precheck cv: cv prec <number of new CVs>
 </pre>
-laforge
+h2. @dda -l@
 <pre>
 $ dda -l
 Device path           Status     State    Parameters
 dda                      0    0x00000000  eoi_workaround:true log_mask:0x0
 dda/brg                  0    0x00000000  driver_name:brg_cpp static:true
 dda/brg/hd               0    0x00000000  driver_name:hd intctl:dda/brg/irq intline:59 intprio:4 hwcfg:3 regoffs:0xF9FE0000 static:true
 dda/brg/irq              0    0x00000000  driver_name:irq_gpm3 intctl:dda intline:0x0 static:true
 dda/brg/powmgr           0    0x00000000  driver_name:powermgr static:true
 dda/brg/uart750_0        0    0x00000000  driver_name:uart750 unit:0 intctl:dda/brg/irq intline:26 intprio:2 regbase:0xfa704500 regwidth:8 brgcfg:2 static:true
 dda/brg/uart750_1        0    0x00000000  driver_name:uart750 unit:1 intctl:dda/brg/irq intline:26 intprio:2 regbase:0xfa704600 regwidth:8 brgcfg:2 static:true
 dda/brg/wdogtim          0    0x00000000  driver_name:wdog_book_e_wdog  static:true
 dda/brg/wdogtim/wdog     0    0x00000000  driver_name:wdog_generic static:true
 dda/brg/irq/cbf          0    0x00000000  driver_name:irq_cbf intctl:dda/brg/irq intline:0x39 regbase:0xe0000000 static:false activate:on_demand
 dda/brg/tina             0    0x00000000  driver_name:tina intctl:dda/brg/irq intline:60,61,62,63 static:false activate:on_demand
 dda/brg/uart750_2        0    0x00000000  driver_name:uart750 unit:2 intctl:dda/brg/irq/cbf intline:7 intprio:20 regbase:0xe0040000 regwidth:32 brgcfg:3 static:false activate:on_demand
 dda/brg/uart750_3        0    0x00000000  driver_name:uart750 unit:3 intctl:dda/brg/irq/cbf intline:8 intprio:20 regbase:0xe0050000 regwidth:32 brgcfg:3 static:false activate:on_demand
 dda/brg/bae0             0    0x00000000  driver_name:FCCETH intctl:dda/brg/irq intline_rx:16 unit:4 intline_tx:15 intline_err:17 mdio_name:mdio0 phy_addr:10 intprio:11 rx_queues:8 lan:false ndl:true frame_size:9600 buffer_size:1536
 dda/brg/bae0/nl          0    0x0000000c  driver_name:nlETSEC unit:2
 dda/brg/lae0             0    0x00000000  driver_name:FCCETH intctl:dda/brg/irq intline_rx:14 unit:2 intline_tx:13 intline_err:18 intline_phy:58 mdio_name:mdio0 phy_addr:9 intprio:10 lan:true frame_size:9600 buffer_size:1536
 dda/brg/mdio0            0    0x00000000  driver_name:MDIO_ETSEC unit:0
 dda/brg/I2CMPC           0    0x00000000  driver_name:I2C port:1 lm_static:true
 dda/brg/adi_cbf          0    0x00000000  driver_name:adi intctl:dda/brg/irq/cbf intlines:0,1,2,3,4,5,6,9,10,11 intvec:84
 dda/brg/adi_pic          0    0x00000000  driver_name:adi intctl:dda/brg/irq intlines:48,49,50,51,52,53,54,55,56
 dda/brg/pci_client0      0    0x00000000  client_name:app3342 driver_name:pci85xx pci_cfg_base:0x08000 venid:0x11c1 devid:0x0051 lm_static:true
 dda/brg/pci_client1      0    0x00000000  client_name:wp2lc driver_name:pci85xx pci_cfg_base:0x08800 venid:0x1980 devid:0x0001 lm_static:true
 dda/brg/srioio           0    0x00000000  driver_name:srioio85xx intctl:dda/brg/irq lcsba:0x0 law:0x4 lm_static:true
 dda/brg/sriomsg_0        0    0x00000000  driver_name:sriomsg85xx dev_unit:0 intctl:dda/brg/irq prio:16 rx_line:38 tx_line:37 lm_static:true
 dda/brg/sriomsg_1        0    0x00000000  driver_name:sriomsg85xx dev_unit:1 intctl:dda/brg/irq prio:16 rx_line:40 tx_line:39 lm_static:true
 </pre>
 h2. @devinfo@
 <pre>
 $ devinfo
 REAL DEVICES
 Device       Mode Cl    Claimed  Unclaimed
 FCCETH:2     excl  1          0          0
     hwaddress:00:1E:DF:FB:33:AE promiscuous:off
     mtu:9600 rxbufsz:9600 hwrxq:32 hwtxq:128 swtxq:128
     rxframes:834 txframes:101 rxbytes:53376 txbytes:6464
     rxerrs:0 txerrs:0
     link:up speed:100Mbit/s duplex:full loopback:off
 FCCETH:4     shrd  2          0          0
     hwaddress:02:00:01:00:00:00 promiscuous:off
     mtu:9600 rxbufsz:9600 hwrxq:32 hwtxq:128 swtxq:256
     rxframes:0 txframes:5085 rxbytes:0 txbytes:326508
     rxerrs:0 txerrs:0
     link:up speed:1000Mbit/s duplex:full loopback:off
 VLAN DEVICES
 Device         VID Pri Real Device    Received Transmitted
 vlan:0          11   6 FCCETH:4              0          0
 DEVICE CLIENTS
 Device       # State RX-q TX-q  Delivered  Discarded Transmitted Process
 FCCETH:2     0 runni  N/A    0          0          0          0 ose_split_client
     frtypes: 0x800 0x806 0x8035 0x86dd
 FCCETH:4     0 runni  N/A    0          0          0          0 ethi_server
     frtypes: 0xbad
 FCCETH:4     1 runni  N/A    0          0          0       5040 Sys_Cls_mch_proc
     frtypes: 0x8907 0x8907
 </pre>
-laforge
+h2. @dumpelg@
-laforge
+<pre>
 $ dumpelg
 LOG ENTRIES:
 seqNr date   time   message
 700101 000409 000;;Subrack 00;Slot 01
 700101 000409 000;CXP102051/10_R9BE/2
 101207 132443 200;SFP01  ;prod  ;rev
 101207 132443 200;SFP02  ;prod  ;rev
 101207 132443 200;SFP03  ;prod  ;rev
 101207 134314 L10;CXC1729957_R73D95;smn 0, apn 1, CXC1727220_R73D34, Nss_tum2_tumgr_proc: red led on
 101207 134314 L10;CXC1729957_R73D95;smn 0, apn 1, CXC1727220_R73D34, Nss_tum2_tumgr_proc: red led on
 110131 041336 L10;CXC1729957_R73D95;smn 0, apn 1, CXC1727220_R73D34, Nss_tum2_tumgr_proc: red led on
 110307 164250 L10;CXC1729957_R73D95;smn 0, apn 1, CXC1727220_R73D34, Nss_tum2_tumgr_proc: red led on
 120502 070133 200;SFP01                 ;prod                 ;rev
 120502 070133 200;SFP02                 ;prod                 ;rev
 120502 070133 200;SFP03                 ;prod                 ;rev
 120612 173054 L10;CXC1729957_R77S55;smn 0, apn 1, CXC1725422%1_R15AA04, Nci_control_proc: red led on
 120612 173100 L10;CXC1729957_R77S55;smn 0, apn 1, CXC1725422%1_R15AA04, Nci_control_proc: red led off
 120612 180602 L10;CXC1729957_R77S55;smn 0, apn 1, CXC1725422%1_R15AA04, Nci_control_proc: red led on
 120612 180607 L10;CXC1729957_R77S55;smn 0, apn 1, CXC1725422%1_R15AA04, Nci_control_proc: red led off
 130205 081309 000;DFWe0604824;Subrack 00;Slot 01
 130205 081309 000;CXP102051/16_R26AZ
 130205 081322 200;SFP01                 ;prod                 ;rev     ;BR 00
 130205 081323 200;SFP02                 ;prod                 ;rev     ;BR 00
 130205 081323 200;SFP03                 ;prod                 ;rev     ;BR 00
 700101 000000 L11; Machine check input to core mcp
 170319 101308 L10;CXC1729957_R79X22;smn 0, apn 1, CXC1725422%1_R17AC03, Nci_control_proc: red led on
 170319 101308 L10;CXC1729957_R79X22;smn 0, apn 1, CXC1725422%1_R17AC03, Nci_control_proc: red led on
 170319 101307 L10;CXC1729957_R79X22;smn 0, apn 1, CXC1725422%1_R17AC03, Nci_control_proc: red led on
 170319 101307 L10;CXC1729957_R79X22;smn 0, apn 1, CXC1725422%1_R17AC03, Nci_control_proc: red led on
 170319 101317 L10;CXC1729957_R79X22;smn 0, apn 1, CXC1725422%1_R17AC03, Nci_control_proc: red led on
 170319 101307 L10;CXC1729957_R79X22;smn 0, apn 1, CXC1725422%1_R17AC03, Nci_control_proc: red led on
 </pre>
 laforge
 h2. @errno@
 <pre>
 $ errno
 Errno Description
 Operation not permitted
 No such file or directory
 No such process
 Interrupted function call
 Input/output error
 No such device or address
 Argument list too long
 Exec format error
 Bad file descriptor
 No child process
 Resource deadlock avoided
 Not enough space
 Permission denied
 Bad address
 Block device required
 Resource busy
 File exists
 Improper link
 No such device
 Not a directory
 Is a directory
 Invalid argument
 Too many open files in system
 Too many open files
 Inappropriate I/O operation
 Text file busy
 File too large
 No space left on device
 Invalid seek
 Read-only file system
 Too many links
 Broken pipe
 Domain error
 Result too large
 Resource temporarily unavailable
 Operation now in progress
 Operation already in progress
 Socket operation on non-socket
 Destination address required
 Message too long
 Protocol wrong type for socket
 Protocol not available
 Protocol not supported
 Socket type not supported
 Operation not supported
 Protocol family not supported
 Address family not supported by protocol family
 Address already in use
 Can't assign requested address
 Network is down
 Network is unreachable
 Network dropped connection on reset
 Software caused connection abort
 Connection reset by peer
 No buffer space available
 Socket is already connected
 Socket is not connected
 Can't send after socket shutdown
 Too many references: can't splice
 Operation timed out
 Connection refused
 Too many levels of symbolic links
 File name too long
 Host is down
 No route to host
 Directory not empty
 Too many processes
 Too many users
 Disc quota exceeded
 Stale file handle
 Too many levels of remote in path
 RPC struct is bad
 RPC version wrong
 RPC prog. not avail
 Program version wrong
 Bad procedure for program
 No locks available
 Function not implemented
 Inappropriate file type or format
 Authentication error
 Need authenticator
 No locks available
 Corrupted message
 Operation canceled
 Cannot start operation
 Operation in progress
 Too many timers
 Not supported
 Device error
 Disk changed
 Internal error
 Invalid client
 No such file manager
 Not mounted
 Attempt to remount device
 Unknown error
 Unknown error
 Unknown error
 Unknown error
 Value too large to be stored in data type
 No such attribute
 Multi-byte character invalid
 No message of desired type
 </pre>
-laforge
+h2. @help@
 <pre>
 $ help
 Command         Description
                 default shell command
 .               execute commands from file
 ?               print description of commands
 EtHostMo_getPmCounters Get PM counters for a specified host
 EtHostMo_startPing
 GtpShDump       Command syntax:
 GtpShPrintProc  Command syntax:
 Ippmlh          Umbrella function for internal COLI commands
 IppsrhInfo                 The IppsrhInfo command has several subcommands;
 NtpDr           Print info from NTP sync HW driver
 UdpShDump       Command syntax:
 UdpShPrintProc  Command syntax:
 aaconfig        Sets TTL timeout for DNS lookups
 aatest          Diagnostics for AA server(s), -h for more help
 adderrorhook    Registers an faulty error hook
 appapi          APP33DR APP3342 RTE/API status and control
 apparp          APP33DR ARP status and control
 appbh           APP33DR BH status and control
 appcmn          APP33DR CMN status and control
 appdscp         APP33DR DSCP
 appflow         APP33DR FLOW
 appfpc          APP33DR FPC
 appfsm          APP33DR FSM status and control
 appiac          APP33DR IAC
 appicmp         APP33DR ICMP status and control
 applaid         APP33DR LAID
 applh           APP33DR LH status and control
 apppd           APP33DR PD
 appph           APP33DR PH status and control
 apppol          APP33DR POL Policies and counters
 appsa           APP33DR SA and counters
 appsh           APP33DR SH status and control
 appsync         APP33DR SYNC
 apptm           APP33DR TM status and control
 arm             print LLP armament info
 arp             Display ARP cache entries
 arplist         Display ARP table entries
 atfConnect      Connect an AU via ATFI
 autodds         Set error check level and/or default trace
 banner
 bcm             Accessing and setup the internal ethernet switch
 bh              CommandName:
 biosls          List installed bios modules
 bl              list processes
 bmlmdata        List loaded modules data
 bmpgmconfig     Management of Board Manager configuration
 bmrdump
 bootmgr         bootmgr command
 bs              Execute a number of commands and print result
 buffel          Display buffel configuration and usage
 bvlq            Get value from BVL. BVL_AREA default name if no area-name
 capi
 cat             copy files to stdout
 cd              change the working directory
 cease           cease ...
 cell            Coli commands connected to cell
 chkdsk          Request a checkdisk on given volume
 chmod           change access mode of files
 cls             clear screen (using ANSI codes)
 connfss         This command has been disabled
 cp              copy files. If multiple names are given, the last name must be a directory. Option -R mean                                                                                     s recursive.
 cpridump        Dumps related info on all non-idle CPRI links.
 createObj       Creates an object.
 cs              Cell supervision
 csti            csti - csti Server status
 cv              Configuration version command
 dbvl
 dda             Send DDA command
 deleteObj       Delete an object.
 devinfo         Display real and virtual device info
 disableBPAIrestart Disables the Restart Board Procedure (No dumps,no stopping of DPs and no board restart)
 disableCBCIrestart Disables the Restart Board Procedure (Dump, stop and no board restart)
 diskcredit      Disk credit command
 domlist         list all regions in one/all domain(s), optionally showing used physical memory fragments.
 dpSetMemDumpAreas Set user memory area to be dumped for <snid>
 dpcmd           Executes a list of commands
 dscpgfh         DSCPGFH SWB debug
 dscpgrh         DSCPGROUPRH SWB RO information
 dspMemChange    Write DSP Memory
 dspMemDump      Read DSP Memory
 dsp_nmi         trigger NMI for DSP with given snid number
 dspload         Load is presented as: mean [min, max], ...
 dspmem          Memory is presented as: Pool1, Pool2, ...
 dsvl
 dump            Print a post mortem dump.See dump -h for more options.
 dumpcap         dumps OAM IP-communication in pcap format on file
 dumpelg         dumpelg will print the error and repair logs to screen
 echo            echo arguments (-n no newline)
 ecodes          List the entries in the error code log.
 ehb             Event History Buffer
 erasehwlog      erasehwlog will erase all hw error logs in flash
 ero             Ero commands
 errno           print description of errno number
 errorlist       Print all registrered error codes.
 etcmd           Type etcmd help for detailed help.
 ethernet        ethernet shell command
 ethmode         Ethernet speed/duplex control cmd's
 exc             Exception Handling: same command as exception
 exception       Exception Handling: same command as exc
 exit            exit the current shell
 fault           fault ...
 faultind        Enables/disables sending of CPRI High Bit error rate Fault indications.
 file            Display and manage objects in 2nd filesystem.
 flcdr           FLCDR status and control
 forever         execute command forever
 format          This command has been disabled
 formathd        Format the Hard Disk
 froInfo         A detailded description
 froInfo-lmcentral A detailded description
 froInfo-lmmonitor A detailded description
 froLog-lmcentral A detailded description
 froLog-lmmonitor A detailded description
 fssls           list fss objects
 gdbtp           Command for handling trace point experiment
 getAttrObj      Get attributes for an object.
 getDiskDataObj  Get attributes for disk for an object.
 getProcessorLoad Get processor load for a PIU.
 getpri          This command has been disabled
 getstat         Internal Event Statistics
 gulm_reset      Assert reset for GULM with given snid number
 gz              Compress/decompress file(s)
 hdinfo          Hard disk parameter information
 hdpartition     checks or harmonizes the disk partitions as per table
 hdreadtest      Hard disk read test of HD
 hdstat          Hard disk statistics printout
 heapinfo        Heap information (for proc/seg)
 help            print description of commands
 hicap           Used to enable, disable hicap or toget current hicap settings
 hili            Hardware Inventory Log Handling commands
 histogram-cell  Histogram log command
 hooks           Print all registered error, dump and reset hooks.
 hostname        show or set hostname
 hwpid           Read hardware pid from specified target
 iacrh           IACRH debug and utilities
 ifconfig        Print IP address
 ifmcstat        Dump multicast group management statistics per interface
 iked            IKE debug commands
 ikepeerfh       IKEPEERFH SWB debug
 ikerh           IKERH SWB debug
 ikev2           IKEv2 debug commands
 inopcnt         Read or clear counter for inop on a given port nr.
 ipac_blockHostRegi Command for blocking of IPHOSTREGI
 ipac_blockSyncRegi Command for blocking of IPSYNCREGI
 ipac_ipadm      Status info for the IPAC IP Adm administrator program
 ipac_ipsyncref  Status info for the IPAC IP Sync Ref administrator program
 ipcp_bh         Status info for the IPCP board handler administrator program
 ipcp_dh         Status info for the distribution handler administrator program
 ipcp_lh         Status info the IPCP link handler administrator program
 ipsecfh         IPSECFH SWB debug
 ipsectunnelfh   IPSECTUNNELFH SWB debug
 iptransmode     information about ip transport settings
 ixrh            IEXS::IXRH Topology
 jdumpthreads    Dump the stack trace of Java threads
 jheapinfo       Java heap information
 keys            configure/display terminal key settings
 killIfc         Kill a named interface
 lhsh            Execute command on remote processor
 license         License server command (license <cmd>)
 linkstat        HDLC state and statistics for MP-ATF.
 linkstat1       Statistics for BP-AU communication.
 linkstat3       Primary Station UAC state and statistics.
 linxeth         Tool for getting information about LINX ethernet connections
 listObj         List an object.
 list_filterobj  Print filter data
 list_traceobj   Print trace data
 listenv         list environment variables for <processes> and their corresponding block.
 listloaded      List Loaded Modules
 lkmcfg          View/create/delete Linx Ethernet links
 llog            Read error log
 ln              make a link from one file to another
 load_zone       Command to display LoadZone information
 log             Log server command
 logattributes   List the attributes for a log
 logclock        Start or stop logging of the system clock.
 logdelete       Delete a log
 login           login command is not supported
 loglevel        Set loglevel for OSENET.
 loglist         Lists all available logs
 lratdbi         Dumps L-RAT Handler internal structure
 ls              list files
 lsproc          List the most recently swaped in processes
 maciDumpSession Dump session related information
 man             man command
 mch             MCH info
 md5             prints MD5 checksum for a file
 mdio            read registers from devices connected to mdio bus
 memrd           Read CPU Memory
 memwatch        Keeps track of memory allocations
 memwr           Write CPU Memory
 migrate         Migrate a program to a core
 mkdir           create directories
 mm              Display MM run-time state information
 mount           mount a volume
 mpcmd           Type mpcmd help for detailed help.
 msi_list        Print region data for MSI
 mtd             Execute 'mtd' commands. (debug, peek, grab, kill, etc..). type 'mtd help'for all commands
 mv              rename/move files
 namelookup      List registered services and pending lookups
 nbs             NBS
 ncdbi           Dumps nc internal structure
 ncli            MO cmd: ncli, start NCLI session to access CS.
 ndp             Display NDP cache entries
 netstat         Display net statistics
 node_id         node identity commands
 notresocnt      Read or clear counter for not resolved problems on a given port nr.
 notresoracnt    Read or clear counter for not resolved radio problems on a given port nr.
 nsdbg           nsdbg enable
 nsinfo          Nameserver information commands
 nssfixfrequency Force regulator to enter fix frequency mode. Synchronization reference should be selected                                                                                      when this command is used, clock should be in locked mode. Fix frequency mode will automatically end when                                                                                      frequency becomes good enough.
 nssfreerunning  Force regulator to enter freerunning state. No synchronization reference should be selecte                                                                                     d when this command is used.
 nssinfo         Get NSS status information
 nssmpinfo       Get NSS MP status information
 nssprodtest     Access memory in DUXI to enable/disable LA_TEST_BUS or PROD_TEST_CLK_MUX in CCR register
 nssreadhist     foo
 nssrefchangeinfo Get 20 latest reference switches
 nssscspiinfo    Get all client and subscriber info
 nssselectregref Set the specified reference type as selectedreference in tureg and tuhwif.
 nsssetfastlock  Setting the jitter/wander tolerance level (R) for EXT REF which changes needed time for cl                                                                                     ock to become locked to the EXT REF.
 nsssetfsyncreg  Set FSYNC transmit interval, pattern and phase alignment.
 nsssysclkinfo   Get 20 latest SystemClock changes
 nsstableinfo    Get NSS MP table information
 nsstugps        Configuration interface for the GPSS
 nsstupktsync    Print useful information for troubleshooting
 ntp             NTP handling commands.
 ntpconfig       Set ntp server ip address | get ntp info
 ntprecover      ceases an NTP alarm and adjusts the node system time to theexternal NTP reference time
 ospi_CXC1321315 Prints ospi status
 partition       Create, delete and list disk partitions.
 passwd          Changing password for all users
 pboot           Access of boot parameters in FLASH
 pcapexplorer    Lists dumpcap traces. Traces can be deleted with the -d option
 pgmUpgradeObj   Soft program upgrade
 pgrun           load and run a program
 ping            The command verifies the IP connectivity to a host.
 ping6           Verify the IPv6 connectivity to another IPv6 system
 pm              With the pm command it is possible to enable trace for a set of pm counters which is used                                                                                      together with the trace object PM_COUNTERS
 pm_create       Create a program.
 pm_ff           Print all file formats supported.
 pm_install      Install a load module
 pm_kill         Kill program
 pm_lmconf       Print configuration for a load module image.
 pm_lminfo       Print information for a/all load module image(s).
 pm_pgconf       Print configuration for a program.
 pm_pginfo       Print information for a/all program(s).
 pm_pt           Print all program types supported.
 pm_start        Start a program.
 pm_uninstall    Uninstall a load module image
 poolinfo        List information about pools
 ppcpm           Processor performance monitoring
 preload         Loads the flash with the specified programs
 printf          ,redirect printf or end redirections
 ps              list processes
 pwd             print the working directory
 qs              List signals in a process signal queue
 rcmd            remote command execution
 rcp             Copy files or directory to remote local volumes
 rdfpga          Reads registers from the FPGA.
 rdsfp           Reads info related to given SFP.
 readclock       Read system clock [unix date format]
 readdspeventlog Read event log from DSP
 reload          Restart the board (default warm)
 resocnt         Read or clear counter for resolved problems on a given port nr.
 resoracnt       Read or clear counter for resolved radio problems on a given port nr.
 restartObj      restarts an object.
 restartntp      Restarts NTP Kernel
 ricm            Print selected debug info. Call without args for help.
 ricm_axcid_range Change the AxCID range.
 ricmfilter      Get the fault indication delay filter time in ms.
 rlc             Clear the ramlog
 rld             Display ramlog
 rlw             Write a string to the ramlog
 rm              remove files
 rmdir           remove (empty) directories
 route           Display or modify route table
 rpmm            ram pmm commands
 rrt-cell        Type 'rrt-cell help' to display RoseRT debugger commands
 rrt-central     Type 'rrt-central help' to display RoseRT debugger commands
 rrt-monitor     Type 'rrt-monitor help' to display RoseRT debugger commands
 rsock           Configure/query rsock deamon.
 run             Runs all intercepted processes
 sadprint        Printout of the Security Association Database (SAD)
 sctp_config     prints some SCTP-ROF configuration data
 sctpadm         cmd sctpadm lists info about all Sctp Associations in SCTP ADM
 sctpadm_config  cmd sctpadm_config lists some configuration data in SCTP ADM.
 sctpadm_info    cmd sctpadm_info lists all process info in SCTP ADM
 sctpadmrofcmd   cmd sctpadmrofcmd send trace settings to user plane.
 sctphost        Prints some SCTP-ROF configuration data, statistical information and lists association or                                                                                      endpoint info in SCTP Host.
 sctphost_info   cmd sctphost_info lists association or endpoint info in SCTP HOST
 sctphost_stat   cmd sctphost_stat prints some statistical information
 sctphosttrace   Configure log filtering and dumping internal log.
 secmode
 semi            display semi area information
 setAttrObj      sets an attribute value for an object.
 setGtpEchoOriginatorState WARNING
 setclock        Set Clock
 setenv          set/list environment variable [for block] [for process]
 sethighsp       Set terminal speed to 115200 baud
 setkey          Configure manual SAs and SPs
 setlowsp        Set terminal speed to 9600 baud
 setpri          This command has been disabled
 sfftime         Set the fault indication delay filter time in ms.
 shell           invoke shell
 sigs            List information about signals
 sleep           This command has been disabled
 sma                       Prints SMA status and container data
 sockstat        List open sockets
 spdel           Delete a system parameter.
 spdprint        Printout of the Security Policy Database (SPD)
 spedit          Edit system parameters interactively
 splitethcdbg    Returns debug information fetched from split eth client.
 splitethsdbg    Returns debug information fetched from ose_split_server.
 splitethstat    Shows/clears statistics of split ethernet server/client.
 spmod           Stepwise view and modify system parameters.
 spr             Read a system parameter.
 spray
 spw             Write a system parameter.
 srioconf        Read/write srio device registers
-laforge
+ss              Show maximum process stack usage
-laforge
+stat            report information about file/directory
-laforge
+supervision     enables/disables supervision of DSP's
 swcon           Set or print srio switch congestion stats
 swdump          Print srio switch registers
 switchObj       Switch an object.
 swperf          Enable/Disable or print srio switch performance stats
 swport          Enable/Disable port on srio switch
 sync            synchronize volume with disk
 syspar          Get or set system parameters
 te              Trace & Error Handling commands
 term            display info about terminal
 tetxt           Adds INFO trace to CPP T&E log.
 timers          Information about timers
 tm              target monitor command
 touch           Create an empty file.
 traceroute      The command finds the routing path to a certain host.
 traceroute6     Verify IPv6 routing to another IPv6 system
 tsec            tsec shell command, use ethernet instead
 uart750         UART750 device driver statistics and settings
 ue              Coli commands connected to ue monitoring
 umask           display/set the current file system mask
 unmount         unmount a volume
 unsetenv        remove environment variables [from block] [from process]
 uptime          display system uptime
 uselmc          Selects an LMC
 vii             VII info
 viilist         VII state list
 vlandev         Create or remove VLAN device
 vols            report volume statistics
 who             list who is logged on
 wrfpga          Writes to a register in the FPGA.
 zzosvarp        Show the address of the OSE kernel data handle.
 </pre>
-laforge
+h2. @iacrh@
 laforge
-laforge
+<pre>
 $ iacrh dumpconfig
 HostRegi PV: 1 SignalRev: 0  PIU froid: 0:
 Max number of sessions: 4096
 HOSTREGI UP
 Host configuration data:
 =========================
 Host:                   1
 ipifFroId:              2
 laid:                   9
 hostType:               0
 ipAddress               10.26.103.10
 clientMacAddr           00:00:00:00:00:00
 noOfPortRanges          0
 prot                    0
 s_Port                  0
 e_Port                  0
 internal state          ETHOST_CONFIGURED
 admin state             CELLO_ADMIN_UNLOCKED
 ttl                     64
 ntp dscp                56
 number of sessions      0
 releasing clients       0
 =========================
 Host:                   2
 ipifFroId:              2
 hostType:               1
 ipAddress               10.26.103.10
 clientMacAddr           00:00:00:00:00:00
 noOfPortRanges          1
 prot                    132
 s_Port                  0
 e_Port                  65535
 =========================
 Host:                   33554432
 ipifFroId:              1
 hostType:               2
 ipAddress               10.26.103.14
 clientMacAddr           02:00:01:00:00:ff
 noOfPortRanges          0
 prot                    0
 s_Port                  0
 e_Port                  0
 IPIFREGI UP
 =========================
 IpInterface:            1
 VLAN:                   1
 vid:                    3
 mtu:                    1500
 prefixlen               30
 defrouter0              10.26.103.13
 defrouter1              0.0.0.0
 defrouter2              0.0.0.0
 rps                     0
 rps_active_addr         0.0.0.0
 rps_passive_addr        0.0.0.0
 rpi                     4
 sbt                     180
 mwr                     3
 mfp                     2
 pbo                     2
 InternalState           IPIF_CONFIGURED
 =========================
 IpInterface:            2
 VLAN:                   1
 vid:                    2
 mtu:                    1500
 prefixlen               30
 defrouter0              10.26.103.9
 defrouter1              0.0.0.0
 defrouter2              0.0.0.0
 rps                     0
 rps_active_addr         0.0.0.0
 rps_passive_addr        0.0.0.0
 rpi                     4
 sbt                     180
 mwr                     3
 mfp                     2
 pbo                     2
 InternalState           IPIF_CONFIGURED
 Static routes
 =========================
-laforge
+</pre>
-laforge
+h2. @ifconfig@
 <pre>
 $ ifconfig
 interface IPv4: lh0
 ip address: 10.26.103.14
 subnetmask: 255.255.255.252
 broadcast: 10.26.103.15
 </pre>
-laforge
+h2. @rld@
 Displays the RAM log, similar to @dmesg@ on linux
 <pre>
 __RAMLOG_SESSION_START__
 .000:BOS detected board type: gpm3blue
 .000:Number of items in the board param list=204
 .000:INFO: system pool cleared from address 0x09400000 to 0x097fffff
 .000:exec: Booting OSE5.8 (BL910375)
 .000:Detected Motorola MPC 85xx, pvr: 0x80210022
 .000:exec: nested interrupts enabled
 .000:exec: Number of swap in  handlers found: 1
 .000:exec: Number of swap out handlers found: 1
 .000:cpu_hal_85xx: init_cpu
 .000:L1CSR0=0, L1CSR1=0
 .000:mm: Using extended addressing for physical addresses.
 .000:mm: superpage enabled, threshold:0x100000, tsize:0xa
 .000:mm: superpage support configured to exclude executable pages from tlb1
 .000:mm: max_domains:255 @ 46d6e0
 .000:exec: install asm exception handler at address:0x400000000300
 .000:exec: install asm exception handler at address:0x400000000300
 .000:mm: Installed short (non superpage capable) ITLB miss handler
 .000:cpu_hal_85xx: enable_caches (1,1).
 .000:L1 D cache enabled.
 .000:L1 I cache enabled.
 .000:   L1CSR0=0x1, L1CSR1=0x1
 .000:L2 cache enabled
 .000:   L2CTL=0xa0000000
 .000:mm: initialization completed.
 .000:Cache bios installed.
 .000:ramdump: Unable to read parameter reduce_dump_validation, attribute value.
 .000:SEMI: CPP error log size = 0x00000400
 .000:SEMI: CPP trace area size = 0x00020000
 .000:exec: memory_model=1 table_extend=14 queued_signal_action=kill
 .000:ramtrace tarce_create: buffer: 94000c0 trace: 94000c0, beg: 9400110 sizeof header: 50
 .000:rmm: Trace could not be recovered.
 .000:rmm: krn/monitor/sys_error=debug:0
 .000:ramtrace tarce_create: buffer: 94000c0 trace: 94000c0, beg: 9400110 sizeof header: 50
 .000:rmm: Up and running. Intercept processes: No.
 .000:exec: Creating isr for tick at vector 1023, reload=266668
 .000:exec: Starting syspool extender (sys_poolid:0x100000).
 .000:exec: Starting mainpool extender (main_poolid:0x10000f).
 .000:exec: Kernel is up.
 ...
 </pre>
-laforge
+h2. @sethighsp@
 laforge
-laforge
+swithces console to 115200 bps
 h2. @ue@
 laforge
 <pre>
 $ ue
  ==== UE Identity Register COLI Commands ====
 ue cap -racueref <ueId> -cellid <cellId>                               - Prints a list of capabilities for a specific Ue.
                                                                          When racUeRef is specifyed as idType, cellId needs to be entered.
 ue disable -ue -traceref <traceRef>                                    - Deactivate Ue selective RBS Ue trace for specific trace ref
                                                                          <traceref> is specified in hexcode (max 6 bytes)
 ue disable -cellid <cellId>                                            - Deactivate all cell selective RBS Ue traces in specific cell
 ue disable -allcell                                                    - Deactivate all cell selective RBS Ue traces in all cells
 ue enable -ue -traceref <traceRef> [-timeout <min>]                    - Activates Ue selective RBS Ue trace for specific traceRef
                                                                          <traceref> is specified in hexcode (max 6 bytes)
                                                                          Optional -timeout <min> specified in minutes [1..720]. Default is 120 minutes.
 ue enable -cellid <cellId> <maxUeinCell> [-qci <qci>] [-timeout <min>] - Activates maxUeinCell [1..5]
                                                                          number of cell selective RBS Ue traces in specific cell.
                                                                          if qci is specified only ues with bearers with specified qci will be traced,
                                                                          Optional -timeout <min> specified in minutes [1..720]. Default is 120 minutes.
 ue enable -allcell -allUe [-timeout <min>]                             - Activates all cell selective RBS Ue traces in all cells
                                                                          Optional -timeout <min> specified in minutes [1..720]. Default is 120 minutes.
 ue meas -racueref <ueId> -cellid <cellId> [-detailed]                  - For racUeRef cellId needs to be entered.
                                                                          -detailed gives more detailed information
 ue print -ue -cellid <cellId> [-qci <qci>] [-v]                        - Print all active Ue:s identities in a specific cell.
                                                                          -qci prints only ues with bearer with specified qci
                                                                          -v adds more Ue data to printout
 ue print -ue -allcell [-qci <qci>] [-v]                                - Print all active Ue:s identities in all cells.
                                                                          -qci prints only ues with bearer with specified qci
                                                                          -v adds more Ue data to printout
 ue print -bearer -cellid <cellId> [-qci <qci>]                         - Print all data bearers in a specific cell.
                                                                          -qci prints only bearers with specified qci
 ue print -bearer -allcell [-qci <qci>]                                 - Print all data bearers in all cells.
                                                                          -qci prints only bearers with specified qci
 ue print -pending                                                      - Print all Ue and Cell pending lists
 ue print -admitted                                                     - Print all admitted Ue:s and Data Radio Bearers in all cells
 ue reset -traceref <traceRef>                                          - Removes Ue selective RBS Ue trace for specific Ue on specific cell.
                                                                          <traceref> is specified in hexcode (max 6 bytes)
 ue set -racueref <UeId> -cellid <cellId> -traceref <traceRef>          - Sets Ue selective RBS Ue trace for specific Ue on specific cell.
                                                                          <traceref> is specified in hexcode (max 6 bytes)
 </pre>
-laforge
+h2. vols
 Similar to @mount@ or @df@ on linux:
 <pre>
 volume      total      used        free   frw device unit
 /              0K     0K 100%     0K 100% FR-
 /null          0K     0K 100%     0K 100% FRW
 /gzip          1K     1K 100%     0K   0% -RW none
 /mole          1K     1K 100%     0K   0% -RW none
 /erpdout       1K     1K 100%     0K   0% -RW none
 /ffs        7796K  4200K  54%  3596K  46% FRW ffsdd <0-1948>
 /d           683M   214M  31%   468M  68% FRW idedd 0 <4-1399999>
 /rmd         950K    20K   2%   930K  98% FRW ram_disk 0 <4-1904>
 /h           599K   197K  33%   402K  67% FR- ftldd 0 <4-1201>
 /zip           1K     1K 100%     0K   0% -RW none
 /c          1147M   614M  53%   533M  46% FRW idedd 0 <1400000-3749999>
 /j          1147M   614M  53%   533M  46% FRW /c 0 <1400000-3749999>
-laforge
+</pre>
 h2. cpridump
 Information about the CPRI links
 <pre>
 $ cpridump
 Port 1, Radio 1 cascadeWord 2, ruId 11, Active, AU1 CPRIi2, O&M connected, ecpAddressNo 0, O&M state 6
 Port 1, Radio 2 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 1, Radio 3 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 1, Radio 4 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 1, Radio 5 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 1, Radio 6 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 2, Radio 1 cascadeWord 2, ruId 21, Pending_Ind, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 2, Radio 2 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 2, Radio 3 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 2, Radio 4 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 2, Radio 5 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 2, Radio 6 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 3, Radio 1 cascadeWord 2, ruId 31, Pending_Ind, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 3, Radio 2 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 3, Radio 3 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 3, Radio 4 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 3, Radio 5 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 3, Radio 6 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 4, Radio 1 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 4, Radio 2 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 4, Radio 3 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 4, Radio 4 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 4, Radio 5 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 4, Radio 6 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 5, Radio 1 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 5, Radio 2 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 5, Radio 3 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 5, Radio 4 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 5, Radio 5 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 5, Radio 6 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 6, Radio 1 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 6, Radio 2 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 6, Radio 3 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 6, Radio 4 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 6, Radio 5 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
 Port 6, Radio 6 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1
-laforge
+</pre>

Project

General

Profile

Miscellaneous Projects » Ericsson RBS 6xxx

DUL Shell Commands » History » Version 3