Actions
RBS6402 » History » Revision 1
Revision 1/8
| Next »
laforge, 08/15/2019 05:09 PM
RBS6402¶
connectors¶
WAN B¶
this is a standard SFP connector, you can use any gigabit ethernet compatible MM or SM SFP module on it
WAN A / PoE¶
Use a LTPoE++ capable 90W PoE injector here
48V¶
This is a standard 3.5mm terminal block. You can e.g. use a Wurth Electronic 691361100002
Fan¶
The fan connector has two pins with +5V and two pins with GND. You can use a Molex 43025-0408 part to mate it. This is just the housing, you will need crimp contacts and matching crimp tool, or you use pre-crimped wires like Molex 79758-0010.
The two top pins (near the latch) are GND, while the two bottom pins (near the enclosure) are +5V.
Updated by laforge almost 5 years ago · 1 revisions