RBS6402 » History » Version 4
tnt, 02/18/2020 02:36 PM
1 | 1 | laforge | h1. RBS6402 |
---|---|---|---|
2 | |||
3 | 2 | laforge | Contrary to the General/typical RBS6000 family, the RBS6402 is a small cell. It is not modular and doesn't consist of modules like DUL/RUS. It doesn't have any CPRI connections. It can support up to three radio modules and comes in a varity of different LTE bands. |
4 | |||
5 | |||
6 | 1 | laforge | h2. connectors |
7 | |||
8 | h3. WAN B |
||
9 | |||
10 | this is a standard SFP connector, you can use any gigabit ethernet compatible MM or SM SFP module on it |
||
11 | |||
12 | h3. WAN A / PoE |
||
13 | |||
14 | Use a LTPoE++ capable 90W PoE injector here |
||
15 | |||
16 | h3. 48V |
||
17 | |||
18 | 4 | tnt | This is a standard 3.5mm terminal block. You can e.g. use a "Wurth Electronic 691361100002":https://octopart.com/691361100002-würth+elektronik-18818376 or "Phoenix contact MC 1,5/2-ST-3,5":https://octopart.com/1840366-phoenix+contact-6675 |
19 | 1 | laforge | |
20 | h3. Fan |
||
21 | |||
22 | The fan connector has two pins with +5V and two pins with GND. You can use a "Molex 43025-0408":https://octopart.com/43025-0408-molex-24935555 part to mate it. This is just the housing, you will need crimp contacts and matching crimp tool, or you use pre-crimped wires like "Molex 79758-0010":https://octopart.com/79758-0010-molex-24727080. |
||
23 | |||
24 | The two top pins (near the latch) are GND, while the two bottom pins (near the enclosure) are +5V. |