Project

General

Profile

Wiki » History » Version 4

laforge, 11/25/2016 02:08 PM

1 4 laforge
{{>toc}}
2
3 1 laforge
h1. mPCIe WWAN modem USB breakout board
4
5
This is a small break-out board for miniPCIe (mPCIe) type cellular / WWAN modems.
6
7
It allows you to insert a mPCIe modem from any vendor, and it will provide you with:
8
9
* mini USB socket for connection to a USB Host (like your PC/Laptop or Embedded System)
10
* 5V DC input for power supply (USB supply usually insufficient for a modem)
11
* all unused mPCIe pins on a 2.54mm break-out header
12
* SIM card slot for a 2FF-sized SIM, USIM or RUIM card
13
14
Particularly the break-out header is useful to get access to various signals exported in a non-standard fashion by some modem models, such as digital audio PCM.
15 4 laforge
16
h2. Pictures
17
18
!SANY1649.jpg!
19
!SANY1650.jpg!
20 1 laforge
21 2 laforge
h2. Design Files, Schematics, Component Placement
22
23
The design was done in EAGLE and the design files can be found in the mpcie-breakout directory of osmo-small-hardware.git (git://git.osmocom.org/osmo-small-hardware.git).
24
25
PDF renderings of schematics and component placement are attached to this page.
26 1 laforge
27
h2. Where to buy
28
29
If you would like to buy a fully-assembled version of this board, you can order it from http://shop.sysmocom.de/products/minipcie-wwan-modem-usb-break-out-board
Add picture from clipboard (Maximum size: 48.8 MB)