Project

General

Profile

Wiki » History » Version 3

laforge, 03/10/2017 03:13 PM

1 1 laforge
h1. multi-voltage dual USB UART
2 1 laforge
3 1 laforge
This is a CP2105 based dual-port USB UART.
4 1 laforge
5 1 laforge
As a very special feature, this device allows you to manually select the UART voltage levels to 1.8, 2.3, 2.5, 2.8, 3.0 or 3.3 Volts.
6 1 laforge
7 1 laforge
It is thus ideal for a lab environment, where you frequently need to interconnect with various embedded electronics devices that have UARTs at unusual voltages.
8 1 laforge
9 1 laforge
Both UART ports feature RxD/TxD/RTS/CTS signals and have TVS diodes for ESD protection.
10 1 laforge
11 1 laforge
Miscellaneous CP2105 GPIOs are available on a separate header
12 1 laforge
13 1 laforge
h2. Pictures
14 1 laforge
15 1 laforge
!mv-uart-front.jpg!  !mv-uart-back.jpg!
16 1 laforge
17 1 laforge
h2. Design Files / Schematics / Layour
18 1 laforge
19 1 laforge
The EAGLE design files for this open hardware project are available in the @osmocom-small-hardware.git@ repository and can be checked out using
20 1 laforge
@git clone git://git.osmocom.org/osmo-small-hardware.git@.
21 1 laforge
22 1 laforge
PDF renderings of schematics and component placement are attached below.
23 1 laforge
24 2 laforge
!mv-uart.png!
25 2 laforge
26 3 laforge
h2. Availability / Where to buy
27 3 laforge
28 3 laforge
The general idea of Open Hardware projects is that anyone is allowed to build the design. So feel free to take the design files and build it yourself, either modified or unmodified. Please make sure you always
29 3 laforge
* attribute the original author (Attribution)
30 3 laforge
* release any changes to the design files under the same terms (Share Alike)
31 1 laforge
32 1 laforge
A fully assembled circuit board can be obtained from http://shop.sysmocom.de/products/multi-voltage-usb-dual-uart
Add picture from clipboard (Maximum size: 48.8 MB)