Compile-with-sercomm » History » Revision 4
« Previous |
Revision 4/10
(diff)
| Next »
gnutoo, 02/19/2016 10:49 PM
To compile nuttx-bb with sercomm, do the following steps:
{{{
git clone git://git.osmocom.org/osmocom-bb
git clone git://git.osmocom.org/nuttx-bb
}}}
* Put the gnuarm(for 64bit) or the codesourcery(for 32bit)
in your path(there is a problem with gnuarm for 32bit).
* Compile osmocom-bb as usual
{{{
cd osmocom-bb/src
make
cd ../../
}}}
* Compile nuttx-bb:
{{{
cd nuttx-bb/nuttx/tools/
./configure.sh compal_e88/nsh #for compal_e88( gta02 and Motorola W220).
./configure.sh compal_e99/nsh #for compal_e99( motorolla c155 )
cd ../
make
}}}
* nuttx.bin is ready for beeing loaded like any other firmware
- Clone osmocom-bb and nuttx-bb, they must reside in the same directory and you shouldn't change the name of the osmocom-bb directory.
Updated by gnutoo over 8 years ago · 4 revisions