Project

General

Profile

BS11LMT » History » Version 2

Version 1 (laforge, 02/19/2016 10:47 PM) → Version 2/8 (mazzoo, 02/19/2016 10:47 PM)


== How to use LMT ==

* connect serial port of PC with J2 on BS11 using the cable that came with the BS11
* start LMT program

=== LMT rs232 connector pinout ===

If you look at the BS-11 interface (Antenne connectors top), its the upper 8-pin connector:

{{{
The four E1 BNC connectors are above here.

(Rx) x x x x (right pin: Gnd)
(Tx) x x x x (right pin: +5V)
|
+ LMT
}}}

see also [http://bs11-abis.gnumonks.org/trac/attachment/wiki/BS11_Configuration/bs11_power_lmt_cabling.jpg bs11_power_lmt_cabling.jpg]

== Known Versions (and issues?) ==

=== LMT v4.17 ===

=== LMT v4.21 ===
Add picture from clipboard (Maximum size: 48.8 MB)