Project

General

Profile

Actions

Bsc nat VTY » History » Revision 10

« Previous | Revision 10/16 (diff) | Next »
Anonymous, 02/19/2016 10:48 PM
fix indenting


PageOutline

This page is a reference fo all VTY commands that you can use interactively on the bsc_nat VTY telnet interface.

In addition, the same commands are used for the configuration file.

configuration reference

=== nat level ===
Configure the nat. Global settings

==== msc ip A.B.C.D ==== * Set the MSC IP address used to connect to the MSC.

==== msc port <1-65500> ==== * Set the MSC Port used to connect to the MSC.

==== timeout auth NR ==== * Time in seconds to wait for the authentication reponse of a BSC.

==== timeout ping NR ==== * Time in seconds to wait between two PING messages

==== timeout pong NR ==== * Time in seconds to wait for a reply of a PING before closing the connection

==== token STR ==== * Authentication token used to authenticate the BSC. Currently this is transfered
in clear text.

==== ip-dscp TOS ==== * Set the IP Type of Service (ToS) for the incoming BSC connections.

==== access-list-name ==== * The name of the access-list to use on the NAT. Only the deny rules will be evaluated.

=== bsc BSC_NR === * Configure the BSC with the number

==== location_area_code <0-65535> ==== * Set the location area code that this BSC is handling

==== token TOKEN ==== * A token for the BSC. The real bsc needs to send this token to use the lac and other filters. This is no real authentication or security scheme.

==== paging forbidden (0|1) ==== * Decide if paging messages should be forwarded to the BSC.

==== description STR. ==== * A description for the BSC.

==== access-list-name STR ==== * Use the access-list for the BSC. First the deny rule will be evaluated, then the allow rule and then the deny rule of the NAT.

Files (0)

Updated by about 8 years ago · 10 revisions

Add picture from clipboard (Maximum size: 48.8 MB)