Project

General

Profile

Actions

Bsc nat VTY » History » Revision 8

« Previous | Revision 8/16 (diff) | Next »
Anonymous, 02/19/2016 10:48 PM
Document the ip-tos in the nat.


PageOutline

This page is a reference fo all VTY commands that you can use interactively on the bsc_nat VTY telnet interface.

In addition, the same commands are used for the configuration file.

configuration reference

=== nat level ===
Configure the nat. Global settings

==== msc ip A.B.C.D ==== * Set the MSC IP address used to connect to the MSC.

==== msc port <1-65500> ==== * Set the MSC Port used to connect to the MSC.

==== imsi allow [IMSI] ==== * The default is to allow all IMSIs. This is equivalent to writing "imsi allow" (the argument is omitted). * The "imsi allow" filter will be evaluated after the "imsi deny" filter.

==== imsi deny [IMSI] ==== * The default is to not deny any IMSI. This is equivalent to writing "imsi deny" (the argument is omitted). * The "imsi deny" filter will be evaluated before the "imsi allow" filter.

==== ip-tos TOS ==== * Set the IP Type of Service (ToS) for the incoming BSC connections.

==== bsc BSC_NR ==== * Configure the BSC with the number

===== lac <0-65535> ===== * Set the location area code that this BSC is handling

===== token TOKEN ===== * A token for the BSC. The real bsc needs to send this token to use the lac and other filters. This is no real authentication or security scheme.

===== imsi allow [IMSI] ===== * The default is to not do any classification and let the NAT level decide. This is equivalent to writing "imsi allow" (the argument is omitted). * The "imsi allow" filter will be evaluated after the "imsi deny" filter. * The per BSC IMSI filter is evaluated before the global IMSI filter.

===== imsi deny [IMSI] ===== * The default is to not deny any IMSI. This is equivalent to writing "imsi deny" (the argument is omitted). * The "imsi deny" filter will be evaluated before the "imsi allow" filter. * The per BSC IMSI filter is evaluated before the global IMSI filter.

Files (0)

Updated by about 8 years ago · 8 revisions

Add picture from clipboard (Maximum size: 48.8 MB)