Osmo-sip-connector » History » Revision 84
« Previous |
Revision 84/87
(diff)
| Next »
laforge, 03/04/2020 08:23 PM
Osmo-sip-connector¶
- Table of contents
- Osmo-sip-connector
- Commercial Support
Introduction¶
osmo-sip-connector translates between MNCC and SIP protocols and hereby replaces the old LCR based approach. Osmo-sip-connector does not handle RTP by itself, an external SIP-PBX server which can accept SIP-Trunks is still required. The following image illustrates how the network components are laid out:
osmo-sip-connector with OsmoNITB¶
osmo-sip-connector with OsmoBSC and OsmoMSC¶
Binary Packages¶
Osmocom provides binary packages for several flavors of Debian and Ubuntu GNU/Linux on a variety of architectures (i586, x86_64, armhf, armv7l). Unless you are a software developer interested in developing on Osmocom, it is recommended you use those packages instead of building from source.
For more details see Binary_Packages
Manuals¶
Howto (configure/run it)¶
See Howto
Source code¶
The source code is available from git.osmocom.org
(module osmo-sip-connector
).
Public read-only access is available via
git clone git://git.osmocom.org/osmo-sip-connector.git
You can browse it via cgit: https://git.osmocom.org/osmo-sip-connector
Contributions are welcome via Gerrit.
Test Suite¶
We have a TTCN-3 test suite as part of our Titan_TTCN3_Testsuites- source code: http://git.osmocom.org/osmo-ttcn3-hacks/tree/sip
- results: https://jenkins.osmocom.org/jenkins/view/TTCN3/job/ttcn3-sip-test/
Commercial Support¶
Commercial support as well as development, system integration and training services for this project are available from sysmocom
Updated by laforge about 4 years ago · 84 revisions