BS11LMT » History » Version 2
Anonymous, 02/19/2016 10:47 PM
add LMT connector pinout
1 | 1 | laforge | |
---|---|---|---|
2 | == How to use LMT == |
||
3 | |||
4 | * connect serial port of PC with J2 on BS11 using the cable that came with the BS11 |
||
5 | * start LMT program |
||
6 | |||
7 | 2 | laforge | === LMT rs232 connector pinout === |
8 | |||
9 | If you look at the BS-11 interface (Antenne connectors top), its the upper 8-pin connector: |
||
10 | |||
11 | {{{ |
||
12 | The four E1 BNC connectors are above here. |
||
13 | |||
14 | (Rx) x x x x (right pin: Gnd) |
||
15 | (Tx) x x x x (right pin: +5V) |
||
16 | | |
||
17 | + LMT |
||
18 | }}} |
||
19 | |||
20 | see also [http://bs11-abis.gnumonks.org/trac/attachment/wiki/BS11_Configuration/bs11_power_lmt_cabling.jpg bs11_power_lmt_cabling.jpg] |
||
21 | |||
22 | 1 | laforge | == Known Versions (and issues?) == |
23 | |||
24 | === LMT v4.17 === |
||
25 | |||
26 | === LMT v4.21 === |