NanoBTSInternals » History » Version 3
Anonymous, 02/19/2016 10:48 PM
corrected the double "Tx" pin name
| 1 | 1 | laforge | '''WARNING: Opening or modifying your nanoBTS will render your warranty void and might affect regulatory approval!''' |
|---|---|---|---|
| 2 | |||
| 3 | 2 | laforge | == nanoBTS 1800 == |
| 4 | |||
| 5 | 1 | laforge | == PCB photographs == |
| 6 | |||
| 7 | 2 | laforge | see attachments at the end of this page. |
| 8 | 1 | laforge | |
| 9 | 2 | laforge | === Debug Port === |
| 10 | 1 | laforge | |
| 11 | There is a serial port for debugging. This port can be accessed via one of the two TIB RJ45 jacks, but only after |
||
| 12 | a small hardware modification has been made. Please reference the following picture for details. |
||
| 13 | |||
| 14 | After soldering those two connections, the pin-out of ''TIB out'' is as follows: |
||
| 15 | |||
| 16 | * Pin 7: PPC UART Tx (3.3V) |
||
| 17 | 3 | laforge | * Pin 8: PPC UART Rx (3.3V) |
| 18 | 1 | laforge | * Pin 10: Ground |
| 19 | |||
| 20 | You can use any level shifter to get the signal up to true RS323 values, or directly connect something like a FT232. |
||
| 21 | |||
| 22 | 2 | laforge | The port runs at 115200 bps, 8N1 |
| 23 | |||
| 24 | 1 | laforge | There seems to be some kind of serial console on the device, we haven't yet figured out more details. |
| 25 | |||
| 26 | 2 | laforge | == nanoBTS 900 == |
| 27 | 1 | laforge | |
| 28 | FIXME |
