Meas and loops » History » Version 1
fixeria, 09/02/2018 07:07 PM
1 | 1 | fixeria | h1. Measurements and control loops |
---|---|---|---|
2 | |||
3 | GSM mobile stations usually do perform measurements of timing, frequency and signal power while being camped on some BTS. The measurements are used for controling mobile phone parameters (such as both transmit and receive gains, signal transmission timings, etc.). The aim of this milestone is to implement the "must have" measurement capabilities and control loops. |
||
4 | |||
5 | * Automatic TX to RX delay measurement |
||
6 | * Calibrated power measurement |
||
7 | * AGC (Automatic Gain Control) for the Receiver |
||
8 | * TX power control loop |
||
9 | * Timing advance control loop |
||
10 | |||
11 | Also see: |
||
12 | |||
13 | * Proper measurement reporting |
||
14 | ** https://lists.osmocom.org/pipermail/baseband-devel/2018-March/005513.html |
||
15 | ** https://gerrit.osmocom.org/#/c/osmocom-bb/+/7470/ |