1 |
fe824265
|
Harald Welte
|
/* ----------------------------------------------------------------------------
|
2 |
|
|
* ATMEL Microcontroller Software Support
|
3 |
|
|
* ----------------------------------------------------------------------------
|
4 |
|
|
* Copyright (c) 2009, Atmel Corporation
|
5 |
|
|
*
|
6 |
|
|
* All rights reserved.
|
7 |
|
|
*
|
8 |
|
|
* Redistribution and use in source and binary forms, with or without
|
9 |
|
|
* modification, are permitted provided that the following conditions are met:
|
10 |
|
|
*
|
11 |
|
|
* - Redistributions of source code must retain the above copyright notice,
|
12 |
|
|
* this list of conditions and the disclaimer below.
|
13 |
|
|
*
|
14 |
|
|
* Atmel's name may not be used to endorse or promote products derived from
|
15 |
|
|
* this software without specific prior written permission.
|
16 |
|
|
*
|
17 |
|
|
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
18 |
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
19 |
|
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
20 |
|
|
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
21 |
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
22 |
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
23 |
|
|
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
24 |
|
|
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
25 |
|
|
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
26 |
|
|
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
27 |
|
|
* ----------------------------------------------------------------------------
|
28 |
|
|
*/
|
29 |
|
|
/**
|
30 |
|
|
* \file
|
31 |
|
|
*
|
32 |
|
|
* This file contains all the specific code for the
|
33 |
|
|
* usb_fast_source example.
|
34 |
|
|
*/
|
35 |
|
|
|
36 |
|
|
/*----------------------------------------------------------------------------
|
37 |
|
|
* Headers
|
38 |
|
|
*----------------------------------------------------------------------------*/
|
39 |
|
|
|
40 |
|
|
#include <board.h>
|
41 |
|
|
|
42 |
|
|
#include <stdio.h>
|
43 |
|
|
#include <stdint.h>
|
44 |
|
|
#include <stdbool.h>
|
45 |
|
|
#include <stdbool.h>
|
46 |
|
|
|
47 |
|
|
#include <irq/irq.h>
|
48 |
|
|
#include <pio/pio.h>
|
49 |
|
|
#include <pio/pio_it.h>
|
50 |
|
|
#include <utility/trace.h>
|
51 |
|
|
#include <utility/led.h>
|
52 |
|
|
|
53 |
|
|
#include <usb/device/core/USBD.h>
|
54 |
|
|
|
55 |
|
|
#include <usb/device/dfu/dfu.h>
|
56 |
|
|
|
57 |
|
|
#include <fast_source.h>
|
58 |
|
|
|
59 |
|
|
/*----------------------------------------------------------------------------
|
60 |
|
|
* Definitions
|
61 |
|
|
*----------------------------------------------------------------------------*/
|
62 |
|
|
|
63 |
|
|
#if 0
|
64 |
|
|
/** Number of available audio buffers. */
|
65 |
|
|
#define BUFFER_NUMBER 8
|
66 |
|
|
/** Size of one buffer in bytes. */
|
67 |
|
|
#define BUFFER_SIZE (AUDDLoopRecDriver_BYTESPERFRAME*2)
|
68 |
|
|
#endif
|
69 |
|
|
|
70 |
|
|
/// Use for power management
|
71 |
|
|
#define STATE_IDLE 0
|
72 |
|
|
/// The USB device is in suspend state
|
73 |
|
|
#define STATE_SUSPEND 4
|
74 |
|
|
/// The USB device is in resume state
|
75 |
|
|
#define STATE_RESUME 5
|
76 |
|
|
|
77 |
|
|
//------------------------------------------------------------------------------
|
78 |
|
|
// Internal variables
|
79 |
|
|
//------------------------------------------------------------------------------
|
80 |
|
|
/// State of USB, for suspend and resume
|
81 |
|
|
unsigned char USBState = STATE_IDLE;
|
82 |
|
|
|
83 |
|
|
#if 0
|
84 |
|
|
/** Data buffers for receiving audio frames from the USB host. */
|
85 |
|
|
static uint8_t buffers[BUFFER_NUMBER][BUFFER_SIZE];
|
86 |
|
|
/** Number of samples stored in each data buffer. */
|
87 |
|
|
static uint32_t bufferSizes[BUFFER_NUMBER];
|
88 |
|
|
/** Next buffer in which USB data can be stored. */
|
89 |
|
|
static uint32_t inBufferIndex = 0;
|
90 |
|
|
/** Number of buffers that can be sent to the DAC. */
|
91 |
|
|
static volatile uint32_t numBuffersToSend = 0;
|
92 |
|
|
#endif
|
93 |
|
|
|
94 |
|
|
/** Current state of the playback stream interface. */
|
95 |
|
|
static volatile uint8_t isPlyActive = 0;
|
96 |
|
|
/** Current state of the record stream interface. */
|
97 |
|
|
static volatile uint8_t isRecActive = 0;
|
98 |
|
|
|
99 |
|
|
/*----------------------------------------------------------------------------
|
100 |
|
|
* VBus monitoring (optional)
|
101 |
|
|
*----------------------------------------------------------------------------*/
|
102 |
|
|
|
103 |
|
|
/** VBus pin instance. */
|
104 |
|
|
static const Pin pinVbus = PIN_USB_VBUS;
|
105 |
|
|
static const Pin pinPB = PIN_PUSHBUTTON_1;
|
106 |
|
|
|
107 |
|
|
/**
|
108 |
|
|
* Handles interrupts coming from PIO controllers.
|
109 |
|
|
*/
|
110 |
|
|
static void ISR_Vbus(const Pin *pPin)
|
111 |
|
|
{
|
112 |
|
|
/* Check current level on VBus */
|
113 |
|
|
if (PIO_Get(&pinVbus))
|
114 |
|
|
{
|
115 |
|
|
TRACE_INFO("VBUS conn\n\r");
|
116 |
|
|
USBD_Connect();
|
117 |
|
|
}
|
118 |
|
|
else
|
119 |
|
|
{
|
120 |
|
|
TRACE_INFO("VBUS discon\n\r");
|
121 |
|
|
USBD_Disconnect();
|
122 |
|
|
}
|
123 |
|
|
}
|
124 |
|
|
|
125 |
|
|
/**
|
126 |
|
|
* Configures the VBus pin to trigger an interrupt when the level on that pin
|
127 |
|
|
* changes.
|
128 |
|
|
*/
|
129 |
|
|
static void VBus_Configure( void )
|
130 |
|
|
{
|
131 |
|
|
/* Configure PIO */
|
132 |
|
|
PIO_Configure(&pinVbus, 1);
|
133 |
|
|
PIO_ConfigureIt(&pinVbus, ISR_Vbus);
|
134 |
|
|
PIO_EnableIt(&pinVbus);
|
135 |
|
|
|
136 |
|
|
/* Check current level on VBus */
|
137 |
|
|
if (PIO_Get(&pinVbus))
|
138 |
|
|
{
|
139 |
|
|
/* if VBUS present, force the connect */
|
140 |
|
|
USBD_Connect();
|
141 |
|
|
}
|
142 |
|
|
else
|
143 |
|
|
{
|
144 |
|
|
TRACE_INFO("discon\n\r");
|
145 |
|
|
USBD_Disconnect();
|
146 |
|
|
}
|
147 |
|
|
}
|
148 |
|
|
|
149 |
|
|
/*----------------------------------------------------------------------------
|
150 |
|
|
* USB Power Control
|
151 |
|
|
*----------------------------------------------------------------------------*/
|
152 |
|
|
|
153 |
|
|
#ifdef PIN_USB_POWER_ENA
|
154 |
|
|
/** Power Enable A (MicroAB Socket) pin instance. */
|
155 |
|
|
static const Pin pinPOnA = PIN_USB_POWER_ENA;
|
156 |
|
|
#endif
|
157 |
|
|
#ifdef PIN_USB_POWER_ENB
|
158 |
|
|
/** Power Enable B (A Socket) pin instance. */
|
159 |
|
|
static const Pin pinPOnB = PIN_USB_POWER_ENB;
|
160 |
|
|
#endif
|
161 |
|
|
#ifdef PIN_USB_POWER_ENC
|
162 |
|
|
/** Power Enable C (A Socket) pin instance. */
|
163 |
|
|
static const Pin pinPOnC = PIN_USB_POWER_ENC;
|
164 |
|
|
#endif
|
165 |
|
|
/**
|
166 |
|
|
* Configures the Power Enable pin to disable self power.
|
167 |
|
|
*/
|
168 |
|
|
static void USBPower_Configure( void )
|
169 |
|
|
{
|
170 |
|
|
#ifdef PIN_USB_POWER_ENA
|
171 |
|
|
PIO_Configure(&pinPOnA, 1);
|
172 |
|
|
#endif
|
173 |
|
|
#ifdef PIN_USB_POWER_ENB
|
174 |
|
|
PIO_Configure(&pinPOnB, 1);
|
175 |
|
|
#endif
|
176 |
|
|
#ifdef PIN_USB_POWER_ENC
|
177 |
|
|
PIO_Configure(&pinPOnC, 1);
|
178 |
|
|
#endif
|
179 |
|
|
}
|
180 |
|
|
|
181 |
|
|
/*----------------------------------------------------------------------------
|
182 |
|
|
* Internal functions
|
183 |
|
|
*----------------------------------------------------------------------------*/
|
184 |
|
|
|
185 |
|
|
#if 0
|
186 |
|
|
/**
|
187 |
|
|
* Invoked when a frame has been received.
|
188 |
|
|
*/
|
189 |
|
|
static void FrameReceived(uint32_t unused,
|
190 |
|
|
uint8_t status,
|
191 |
|
|
uint32_t transferred,
|
192 |
|
|
uint32_t remaining)
|
193 |
|
|
{
|
194 |
|
|
if (status == USBD_STATUS_SUCCESS)
|
195 |
|
|
{
|
196 |
|
|
/* Loopback! add this buffer to write list */
|
197 |
|
|
if (!isRecActive) {}
|
198 |
|
|
else
|
199 |
|
|
{
|
200 |
|
|
AUDDLoopRecDriver_Write(buffers[inBufferIndex],
|
201 |
|
|
AUDDLoopRecDriver_BYTESPERFRAME,
|
202 |
|
|
NULL, 0);
|
203 |
|
|
}
|
204 |
|
|
|
205 |
|
|
/* Update input status data */
|
206 |
|
|
bufferSizes[inBufferIndex] = transferred
|
207 |
|
|
/ AUDDLoopRecDriver_BYTESPERSAMPLE;
|
208 |
|
|
inBufferIndex = (inBufferIndex + 1) % BUFFER_NUMBER;
|
209 |
|
|
numBuffersToSend++;
|
210 |
|
|
|
211 |
|
|
}
|
212 |
|
|
else if (status == USBD_STATUS_ABORTED)
|
213 |
|
|
{
|
214 |
|
|
/* Error , ABORT, add NULL buffer */
|
215 |
|
|
bufferSizes[inBufferIndex] = 0;
|
216 |
|
|
inBufferIndex = (inBufferIndex + 1) % BUFFER_NUMBER;
|
217 |
|
|
numBuffersToSend++;
|
218 |
|
|
}
|
219 |
|
|
else
|
220 |
|
|
{
|
221 |
|
|
/* Packet is discarded */
|
222 |
|
|
}
|
223 |
|
|
|
224 |
|
|
/* Receive next packet */
|
225 |
|
|
AUDDLoopRecDriver_Read(buffers[inBufferIndex],
|
226 |
|
|
AUDDLoopRecDriver_BYTESPERFRAME,
|
227 |
|
|
(TransferCallback) FrameReceived,
|
228 |
|
|
0); // No optional argument
|
229 |
|
|
}
|
230 |
|
|
#endif
|
231 |
|
|
|
232 |
|
|
/*----------------------------------------------------------------------------
|
233 |
|
|
* Callbacks re-implementation
|
234 |
|
|
*----------------------------------------------------------------------------*/
|
235 |
|
|
|
236 |
|
|
//------------------------------------------------------------------------------
|
237 |
|
|
/// Invoked when the USB device leaves the Suspended state. By default,
|
238 |
|
|
/// configures the LEDs.
|
239 |
|
|
//------------------------------------------------------------------------------
|
240 |
|
|
void USBDCallbacks_Resumed(void)
|
241 |
|
|
{
|
242 |
|
|
// Initialize LEDs
|
243 |
|
|
LED_Configure(USBD_LEDPOWER);
|
244 |
|
|
LED_Set(USBD_LEDPOWER);
|
245 |
|
|
LED_Configure(USBD_LEDUSB);
|
246 |
|
|
LED_Clear(USBD_LEDUSB);
|
247 |
|
|
USBState = STATE_RESUME;
|
248 |
|
|
}
|
249 |
|
|
|
250 |
|
|
//------------------------------------------------------------------------------
|
251 |
|
|
/// Invoked when the USB device gets suspended. By default, turns off all LEDs.
|
252 |
|
|
//------------------------------------------------------------------------------
|
253 |
|
|
void USBDCallbacks_Suspended(void)
|
254 |
|
|
{
|
255 |
|
|
// Turn off LEDs
|
256 |
|
|
LED_Clear(USBD_LEDPOWER);
|
257 |
|
|
LED_Clear(USBD_LEDUSB);
|
258 |
|
|
USBState = STATE_SUSPEND;
|
259 |
|
|
}
|
260 |
|
|
|
261 |
|
|
|
262 |
|
|
|
263 |
|
|
/*----------------------------------------------------------------------------
|
264 |
|
|
* Exported functions
|
265 |
|
|
*----------------------------------------------------------------------------*/
|
266 |
|
|
|
267 |
|
|
extern void USBD_IrqHandler(void);
|
268 |
|
|
/**
|
269 |
|
|
* \brief usb_audio_looprec Application entry point.
|
270 |
|
|
*
|
271 |
|
|
* Starts the driver and waits for an audio input stream to forward to the DAC.
|
272 |
|
|
*/
|
273 |
|
|
int main(void)
|
274 |
|
|
{
|
275 |
|
|
volatile uint8_t usbConn = 0;
|
276 |
|
|
volatile uint8_t plyOn = 0, recOn = 0;
|
277 |
|
|
|
278 |
|
|
TRACE_CONFIGURE(DBGU_STANDARD, 115200, BOARD_MCK);
|
279 |
|
|
|
280 |
|
|
printf("-- USB Device Fast Audio Source %s --\n\r", SOFTPACK_VERSION);
|
281 |
|
|
printf("-- %s\n\r", BOARD_NAME);
|
282 |
|
|
printf("-- Compiled: %s %s --\n\r", __DATE__, __TIME__);
|
283 |
|
|
|
284 |
|
|
/* If they are present, configure Vbus & Wake-up pins */
|
285 |
|
|
PIO_InitializeInterrupts(0);
|
286 |
|
|
|
287 |
|
|
/* Initialize all USB power (off) */
|
288 |
|
|
USBPower_Configure();
|
289 |
|
|
|
290 |
|
|
/* Audio STREAM LED */
|
291 |
|
|
LED_Configure(USBD_LEDOTHER);
|
292 |
|
|
|
293 |
|
|
/* USB audio driver initialization */
|
294 |
|
|
fastsource_init();
|
295 |
|
|
|
296 |
|
|
/* connect if needed */
|
297 |
|
|
VBus_Configure();
|
298 |
|
|
|
299 |
|
|
PIO_Configure(&pinPB, 1);
|
300 |
|
|
|
301 |
|
|
static int state = 0;
|
302 |
|
|
|
303 |
|
|
/* Infinite loop */
|
304 |
|
|
while (1)
|
305 |
|
|
{
|
306 |
|
|
if (USBD_GetState() < USBD_STATE_CONFIGURED)
|
307 |
|
|
{
|
308 |
|
|
usbConn = 0;
|
309 |
|
|
continue;
|
310 |
|
|
}
|
311 |
|
|
if (state == 0) {
|
312 |
|
|
fastsource_start();
|
313 |
|
|
state = 1;
|
314 |
|
|
}
|
315 |
|
|
if (plyOn)
|
316 |
|
|
{
|
317 |
|
|
if (isPlyActive == 0)
|
318 |
|
|
{
|
319 |
|
|
printf("plyE ");
|
320 |
|
|
plyOn = 0;
|
321 |
|
|
}
|
322 |
|
|
}
|
323 |
|
|
else if (isPlyActive)
|
324 |
|
|
{
|
325 |
|
|
#if 0
|
326 |
|
|
/* Try to Start Reading the incoming audio stream */
|
327 |
|
|
AUDDLoopRecDriver_Read(buffers[inBufferIndex],
|
328 |
|
|
AUDDLoopRecDriver_BYTESPERFRAME,
|
329 |
|
|
(TransferCallback) FrameReceived,
|
330 |
|
|
0); // No optional argument
|
331 |
|
|
|
332 |
|
|
printf("plyS ");
|
333 |
|
|
plyOn = 1;
|
334 |
|
|
#endif
|
335 |
|
|
}
|
336 |
|
|
if (recOn)
|
337 |
|
|
{
|
338 |
|
|
if (isRecActive == 0)
|
339 |
|
|
{
|
340 |
|
|
printf("recE ");
|
341 |
|
|
recOn = 0;
|
342 |
|
|
}
|
343 |
|
|
}
|
344 |
|
|
else if (isRecActive)
|
345 |
|
|
{
|
346 |
|
|
printf("recS ");
|
347 |
|
|
recOn = 1;
|
348 |
|
|
}
|
349 |
|
|
|
350 |
|
|
#ifdef dfu
|
351 |
|
|
if (PIO_Get(&pinPB) == 0)
|
352 |
|
|
DFURT_SwitchToDFU();
|
353 |
|
|
#endif
|
354 |
|
|
}
|
355 |
|
|
}
|
356 |
|
|
/** \endcond */
|