Project

General

Profile

EC20 » History » Version 13

neels, 11/24/2016 10:22 AM

1 13 neels
{{>toc}}
2
3 1 zecke
h1. Wiki
4
5 3 zecke
h2. EC20
6
7
Seems to be a MDM9615 + MSM9615. Linux seems to be in charge of things.
8
9
h3. How does it work?
10
11 1 zecke
If on Host-PC I have ttyUSB3.. and I type AT. How does it end up at the modem? On the Linux side there is @atfwd_daemon@ that registers with a local ril daemon but how is USB connected. Who is bouncing things back to it or is Linux forwarding everything..
12 8 laforge
13
* the USB gadget (client) is entirely managed by the Linux on the Cortex-A5.
14
* the individual gadgets are implemented by drivers like f_diag.c or f_serial.c
15
* @f_serial.c@ seems to be able to connect each virtual serial port to a number of different transports:
16
** xport_tty (/dev/ttyGS* device to userspace using @u_serial.c@)
17
** xport_sdio (forwarding via SDIO using @u_sdio.c@)
18
** xport_smd (fowarding via shared memory to different CPU core using @u_smd.c@)
19
** xport_hsic (forwarding to different processor via GSIC using @u_{data,ctrl}_hsic.c@)
20
** xport_hsuart (forwarding via high-speed uart for DUN/RMNET via @u_data_hsuart.c@)
21
22 11 laforge
h3. LED
23 8 laforge
24 12 laforge
GPIO90 seems to be the WWAN LED, quectel_daemon controls it via @echo 0|1 > /sys/class/gpio/gpio90/value@
25 3 zecke
26
h3. Power management
27
28
Sleep/Power off seem to be "intercepted" by @atfwd_daemon@ that can execute "echo mem > /sys/power/state". Let's explore other options for wakeup. Is there a RTC?
29
30
31
h3. Firmware updates with FOTA
32
33
APN for OTA is configured separately on UC20, assumingly the same applies for EC20. A update.zip will be stored on the "cache" partition and it looks like the recovery system will be booted. I guess that then the reocvery system will unpack the update.zip and flash the partitions.
34
35
h3. Debugging with ADB
36
37 1 zecke
Switching on adb (or fastboot or debug to NMEA console)
38
39
<pre>
40
AT+QLINUXCMD="/usr/bin/usb_uartdiag"
41
AT+QFASTBOOT
42
AT+QLINUXCMD="echo foo > /dev/ttyGS0"
43 10 laforge
AT+QLINUXCMD="ps axuw > /dev/ttyGS0"
44
AT+QLINUXCMD="cat /usr/bin/usb_uartdiag > /dev/ttyGS0"
45
46 3 zecke
...
47
48
adb shell
49
# /
50 1 zecke
</pre>
51
52 3 zecke
@/usr/bin/usb_uartdig@ sends "endpoints" to a sysfs file
53 1 zecke
54 3 zecke
55 2 zecke
Changing qcserial.c to have adb and ttyUSBs.. Holger wants to upstream it after 32C3.
56 1 zecke
57
<pre>
58
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
59
index 51da652..2d8d09e 100644
60
--- a/drivers/usb/serial/qcserial.c
61
+++ b/drivers/usb/serial/qcserial.c
62
@@ -176,8 +176,9 @@ static const struct usb_device_id id_table[] = {
63
 };
64
 MODULE_DEVICE_TABLE(usb, id_table);
65
 
66
-static int handle_quectel_ec20(struct device *dev, int ifnum)
67
+static int handle_quectel_ec20(struct usb_device *usbdev, int ifnum)
68
 {
69
+       struct device *dev = &usbdev->dev;
70
        int altsetting = 0;
71
 
72
        /*
73
@@ -201,10 +202,12 @@ static int handle_quectel_ec20(struct device *dev, int ifnum)
74
                dev_dbg(dev, "Quectel EC20 Modem port found\n");
75
                break;
76
        case 4:
77
-       case 5:
78
                /* Don't claim the QMI/net or debug interface */
79
                altsetting = -1;
80
                break;
81
+       case 5:
82
+               usb_set_interface(usbdev, ifnum, 0);
83
+               altsetting = -1;
84
        }
85
 
86
        return altsetting;
87
@@ -285,7 +288,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
88
        case QCSERIAL_G2K:
89
                /* handle non-standard layouts */
90
                if ((nintf == 5 || nintf == 6) && id->idProduct == QUECTEL_EC20_PID) {
91
-                       altsetting = handle_quectel_ec20(dev, ifnum);
92
+                       altsetting = handle_quectel_ec20(serial->dev, ifnum);
93
                        goto done;
94
                }
95
 
96
</pre>
97
98
99
<pre>
100
Not working userspace code
101
102
#include <libusb.h>
103
104
#include <stdio.h>
105
#include <stdlib.h>
106
107
int main(int argc, char **argv)
108
{
109
	struct libusb_device_handle *devh;
110
	int rc;
111
112
	rc = libusb_init(NULL);
113
	printf("%d\n", rc);
114
115
	devh = libusb_open_device_with_vid_pid(NULL, 0x05c6, 0x9215);
116
	if (!devh) {
117
		abort();
118
	}
119
	rc = libusb_claim_interface(devh, 5);
120
	printf("%d\n", rc);
121
	//rc = libusb_detach_kernel_driver(devh, 5);
122
	//printf("%d\n", rc);
123
	rc = libusb_set_interface_alt_setting(devh, 5, 0);
124
	printf("%d\n", rc);     ====> currently prints -5 but is like the one above..
125
	return EXIT_FAILURE;
126
}
127 4 zecke
</pre>
128 3 zecke
129 9 laforge
h3. fastboot / flashing
130
131
The appsboot.mbn we know of (sha1sum 8d47d7e8ca8a15ff089994d87e36b531f36f907a) has no signature and no certificate chain.  This information is established by looking at the image header, whose formta is "documented" in https://android.googlesource.com/kernel/lk/+/caf/master/target/mdm9615/tools/mkheader.c
132
133
134 5 zecke
h3. full lsof output
135 1 zecke
136 6 zecke
[[LsOfOutput]]
137 5 zecke
138 3 zecke
h3. ps
139 1 zecke
140 4 zecke
<pre>
141 3 zecke
/ # ps
142
PID   USER     TIME   COMMAND
143
   1 root       0:01 init [5]
144
   2 root       0:00 [kthreadd]
145
   3 root       0:00 [ksoftirqd/0]
146
   4 root       0:00 [kworker/0:0]
147
   6 root       0:00 [khelper]
148
   7 root       0:00 [netns]
149
   8 root       0:00 [sync_supers]
150
   9 root       0:00 [bdi-default]
151
  10 root       0:00 [kblockd]
152
  11 root       0:00 [khubd]
153
  12 root       0:00 [kworker/0:1]
154
  13 root       0:00 [modem_notifier]
155
  14 root       0:00 [smd_channel_clo]
156
  15 root       0:00 [smsm_cb_wq]
157
  16 root       0:00 [kworker/u:1]
158
  17 root       0:00 [qmi]
159
  18 root       0:00 [nmea]
160
  19 root       0:00 [RPCRPY_CNTL]
161
  20 root       0:00 [IPCRTR]
162
  21 root       0:00 [msm_ipc_router]
163
  22 root       0:00 [ipc_rtr_smd_rpc]
164
  23 root       0:00 [kworker/u:2]
165
  24 root       0:00 [apr_driver]
166
  25 root       0:00 [kswapd0]
167
  26 root       0:00 [ipc_rtr_q6_ipcr]
168
  27 root       0:00 [fsnotify_mark]
169
  28 root       0:00 [crypto]
170
  40 root       0:00 [quec_dtr]
171
  41 root       0:00 [mtdblock0]
172
  42 root       0:00 [mtdblock1]
173
  43 root       0:00 [mtdblock2]
174
  44 root       0:00 [mtdblock3]
175
  45 root       0:00 [mtdblock4]
176
  46 root       0:00 [mtdblock5]
177
  47 root       0:00 [mtdblock6]
178
  48 root       0:00 [mtdblock7]
179
  49 root       0:00 [mtdblock8]
180
  50 root       0:00 [mtdblock9]
181
  51 root       0:00 [mtdblock10]
182
  52 root       0:00 [mtdblock11]
183
  53 root       0:00 [mtdblock12]
184
  54 root       0:00 [mtdblock13]
185
  55 root       0:00 [mtdblock14]
186
  56 root       0:00 [mtdblock15]
187
  57 root       0:00 [spi_qsd.0]
188
  58 root       0:00 [mhsic_wq]
189
  59 root       0:00 [k_rmnet_mux_wor]
190
  60 root       0:00 [f_mtp]
191
  61 root       0:00 [file-storage]
192
  63 root       0:00 [uether]
193
  64 root       0:00 [diag_wq]
194
  65 root       0:00 [diag_cntl_wq]
195
  66 root       0:00 [iewq]
196
  67 root       0:00 [irq/368-msm-sdc]
197
  68 root       0:00 [usb_bam_wq]
198
  69 root       0:00 [bam_dmux_rx]
199
  70 root       0:00 [bam_dmux_tx]
200
  71 root       0:00 [deferwq]
201
  72 root       0:00 [yaffs-bg-1]
202
  92 root       0:00 [k_gserial]
203
  93 root       0:00 [k_gsmd]
204
  94 root       0:00 [k_gbam]
205
  95 root       0:00 [gsmd_ctrl]
206
 129 root       0:00 [yaffs-bg-1]
207
 140 root       0:00 [yaffs-bg-1]
208
 183 root       0:00 /sbin/adbd
209
 205 root       0:00 /usr/bin/time_daemon
210
 208 root       0:00 /usr/bin/wapfotadaemon
211
 211 root       0:00 /usr/bin/wapfotadaemon
212
 212 root       0:00 sh -c qmi_simple_ril_test modem_port=rmnet0 input=/usr/bi
213
 217 root       0:00 qmi_simple_ril_test modem_port=rmnet0 input=/usr/bin/comm
214
 224 nobody     0:00 /usr/bin/dnsmasq -7 /etc/dnsmasq.d
215
 227 root       0:00 qti
216
 231 root       0:00 /sbin/syslogd -n -C64 -m 20
217
 240 root       0:00 /usr/bin/diagrebootapp
218
 246 root       0:00 /usr/bin/atfwd_daemon
219
 256 root       0:00 /usr/bin/qmuxd
220
 272 root       0:00 /bin/sh /usr/sbin/restart_mbimd
221
 275 root       0:00 /usr/bin/netmgrd -u /etc/udhcpc.d/udhcpc.script
222
 280 root       0:00 /usr/bin/qmi_shutdown_modem
223
 284 root       0:03 /usr/bin/quectel_daemon
224
 304 root       0:00 /usr/bin/mbimd
225
 346 root       0:00 /sbin/reboot-daemon
226
 347 root       0:00 /sbin/getty -L ttyHSL0 115200 console
227
 364 root       0:00 /bin/sh /usr/bin/nmea_demon.sh ttyGS0
228
 367 root       0:00 quec_bridge /dev/nmea /dev/ttyGS0 s
229
 439 root       0:01 alsaucm_test
230
 453 root       0:00 [kworker/u:0]
231
 455 root       0:00 [kworker/u:3]
232
 457 root       0:00 [kworker/0:2]
233
 463 root       0:00 [flush-31:15]
234
 473 root       0:00 /bin/sh -
235
 477 root       0:00 [flush-31:14]
236
 478 root       0:00 ps
237 1 zecke
/ # 
238 4 zecke
</pre>
239 3 zecke
240
h3. dmesg
241 1 zecke
242 4 zecke
<pre>
243 3 zecke
/ # dmesg
244
[    0.000000]   Normal zone: 9266 pages, LIFO batch:1
245
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
246
[    0.000000] pcpu-alloc: [0] 0 
247
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 9266
248
[    0.000000] Kernel command line: noinitrd root=/dev/mtdblock14 rw rootfstype=yaffs2 console=ttyHSL0,115200,n8 androidboot.hardware=qcom androidboot.serialno=MDM9615 androidboot.baseband=msm
249
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
250
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
251
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
252
[    0.000000] Memory: 15MB 22MB = 37MB total
253
[    0.000000] Memory: 29472k/29472k available, 9440k reserved, 0K highmem
254
[    0.000000] Virtual kernel memory layout:
255
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
256
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
257
[    0.000000]     DMA     : 0xff000000 - 0xffe00000   (  14 MB)
258
[    0.000000]     vmalloc : 0xc6800000 - 0xfa000000   ( 824 MB)
259
[    0.000000]     lowmem  : 0xc0000000 - 0xc6700000   ( 103 MB)
260
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
261
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
262
[    0.000000]       .init : 0xc0008000 - 0xc0032000   ( 168 kB)
263
[    0.000000]       .text : 0xc0032000 - 0xc05ad1d8   (5613 kB)
264
[    0.000000]       .data : 0xc05ae000 - 0xc061ab38   ( 435 kB)
265
[    0.000000]        .bss : 0xc061ab78 - 0xc07cd050   (1738 kB)
266
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
267
[    0.000000] Preemptible hierarchical RCU implementation.
268
[    0.000000] NR_IRQS:681
269
[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30520ns, wraps every 131084001ms
270
[    0.000000] Console: colour dummy device 80x30
271
[    0.150190] Calibrating delay using timer specific routine.. 9.62 BogoMIPS (lpj=48102)
272
[    0.150221] pid_max: default: 32768 minimum: 301
273
[    0.150679] Mount-cache hash table entries: 512
274
[    0.151320] Initializing cgroup subsys debug
275
[    0.151350] Initializing cgroup subsys cpuacct
276
[    0.151381] Initializing cgroup subsys freezer
277
[    0.151442] CPU: Testing write buffer coherency: ok
278
[    0.157271] print_constraints: dummy: 
279
[    0.157668] NET: Registered protocol family 16
280
[    0.157820] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
281
[    0.158980] msm_rpm_init: RPM firmware 3.0.16842958
282
[    0.173203] pm8018_probe: PMIC revision 1: F3
283
[    0.173233] pm8018_probe: PMIC revision 2: 08
284
[    0.173233] pm8018_probe: PMIC version: PM8018 rev 2.1
285
[    0.173264] pm8018_probe: PMIC Restart Reason: Triggered from KPD (power key press)
286
[    0.174240] pm_gpio_probe: OK: base=88, ngpio=6
287
[    0.174515] pm8xxx_mpp_probe: OK: base=94, ngpio=6
288
[    0.181962] cpufreq_table_init: CPU: 4 scaling frequencies supported.
289
[    0.186754] sps:REVISION of BAM 0xc6818000 is 0x5.
290
[    0.186784] sps:BAM 0x12244000 is registered.
291
[    0.187517] sps:sps is ready.
292
[    0.209034] bio: create slab <bio-0> at 0
293
[    0.209797] ION heap vmalloc created
294
[    0.209827] ION heap iommu created
295
[    0.209858] ION heap audio created at 46e01000 with size af000
296
[    0.210254] pm8xxx_pwm_probe: OK
297
[    0.210865] SCSI subsystem initialized
298
[    0.211048] usbcore: registered new interface driver usbfs
299
[    0.211200] usbcore: registered new interface driver hub
300
[    0.211414] usbcore: registered new device driver usb
301
[    0.212055] Registered led device: led:kb
302
[    0.212452] Advanced Linux Sound Architecture Driver Version 1.0.24.
303
[    0.213215] Switching to clocksource gp_timer
304
[    0.223134] NET: Registered protocol family 2
305
[    0.223378] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
306
[    0.223683] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
307
[    0.223744] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
308
[    0.223805] TCP: Hash tables configured (established 2048 bind 2048)
309
[    0.223836] TCP reno registered
310
[    0.223836] UDP hash table entries: 256 (order: 0, 4096 bytes)
311
[    0.223897] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
312
[    0.224629] NET: Registered protocol family 1
313
[    0.228231] Notify: smsm init
314
[    0.234518] NET: Registered protocol family 27
315
[    0.235373] apr_tal:Q6 Is Up
316
[    0.236593] modem_8960_init: modem fatal driver init'ed.
317
[    0.236868] lpass_fatal_init: lpass SSR driver init'ed.
318
[    0.237265] msm_rpm_log_probe: OK
319
[    0.249992] yaffs: yaffs built Jul 21 2016 14:54:39 Installing.
320
[    0.250053] msgmni has been set to 57
321
[    0.251701] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
322
[    0.251732] io scheduler noop registered
323
[    0.251762] io scheduler deadline registered
324
[    0.251823] io scheduler cfq registered (default)
325
[    0.398596] apr_tal:Modem Is Up
326
[    0.409064] msm_serial: driver initialized
327
[    0.409217] msm_serial_hsl: detected port #0
328
[    0.409400] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16240000 (irq = 182) is a MSM
329
[    0.409522] msm_serial_hsl: console setup on port #0
330
[    0.834030] console [ttyHSL0] enabled
331
[    0.853807] msm_serial_hsl: driver initialized
332
[    0.865649] brd: module loaded
333
[    0.871600] loop: module loaded
334
[    0.874347] init gpio to irq = 0
335
[    0.877002] init gpio to irq = 312
336
[    0.880329] quectel_power_manager_probe: OK ###############################
337
[    0.973874] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
338
[    0.979490] qup_i2c qup_i2c.0: I2C slave addr:0xd not connected
339
[    0.985533] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:183
340
[    0.991973] qup_i2c qup_i2c.0: I2C slave addr:0xd not connected
341
[    0.997894] failed to read wcd9xxx register
342
[    1.002044] tabla-i2c-core 0-000d: Codec read failed
343
[    1.006989] failed to read the wcd9xxx status
344
[    1.014649] tabla-i2c-core: probe of 0-000d failed with error -107
345
[    1.019807] probe for other slaves devices of tabla
346
[    1.024690] probe for other slaves devices of tabla
347
[    1.029513] probe for other slaves devices of tabla
348
[    1.034457] i2c-core: driver [tabla-i2c-core] using legacy suspend method
349
[    1.041141] i2c-core: driver [tabla-i2c-core] using legacy resume method
350
[    1.049137] SCSI Media Changer driver v0.25 
351
[    1.053197] msm_nand_probe: phys addr 0x1b400000 
352
[    1.057134] msm_nand_probe: dmac 0x3
353
[    1.060643] msm_nand_probe: allocated dma buffer at ffdfe000, dma_addr 46a40000
354
[    1.068121] ONFI probe : Found a nonONFI Compliant device 
355
[    1.073462] status: c00020
356
[    1.076087] nandid: 1590aac8 maker c8 device aa
357
[    1.080604] Found a supported NAND device
358
[    1.084602] NAND Controller ID : 0x4030
359
[    1.088386] NAND Device ID  : 0x1590aac8
360
[    1.092293] Buswidth : 8 Bits
361
[    1.095284] Density  : 256 MByte
362
[    1.098458] Pagesize : 2048 Bytes
363
[    1.101754] Erasesize: 131072 Bytes
364
[    1.105264] Oobsize  : 64 Bytes
365
[    1.108377] CFG0 Init  : 0xa8d408c0
366
[    1.111826] CFG1 Init  : 0x0004745c
367
[    1.115336] ECCBUFCFG  : 0x00000203
368
[    1.118785] Creating 16 MTD partitions on "msm_nand":
369
[    1.123851] 0x0000050c0000-0x000005b00000 : "boot"
370
[    1.130260] 0x000000140000-0x0000004a0000 : "sbl2"
371
[    1.135479] 0x0000004a0000-0x000000800000 : "rpm"
372
[    1.140485] 0x000000800000-0x000000d80000 : "efs2"
373
[    1.145643] 0x000000d80000-0x0000012e0000 : "dsp1"
374
[    1.150770] 0x0000012e0000-0x000001d20000 : "dsp3"
375
[    1.156020] 0x000001d20000-0x000004fe0000 : "dsp2"
376
[    1.161147] 0x000004fe0000-0x0000050c0000 : "aboot"
377
[    1.166366] 0x000000000000-0x000000140000 : "mibib"
378
[    1.171493] 0x000005b00000-0x000009b60000 : "cache"
379
[    1.176773] 0x000009b60000-0x000009cc0000 : "misc"
380
[    1.181840] 0x000009cc0000-0x00000a720000 : "recovery"
381
[    1.187395] 0x00000a720000-0x00000a880000 : "fota"
382
[    1.192614] 0x00000a880000-0x00000bf60000 : "recoveryfs"
383
[    1.198382] 0x00000bf60000-0x00000d640000 : "system"
384
[    1.203754] 0x00000d640000-0x000010000000 : "userdata"
385
[    1.210407] rmnet_init: BAM devices[8]
386
[    1.218373] msm_otg msm_otg: msm_otg probe
387
[    1.221455] msm_otg msm_otg: failed to get phy_clk
388
[    1.226308] msm_otg msm_otg: OTG regs = c6828000
389
[    1.232595] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
390
[    1.251121] Initializing USB Mass Storage driver...
391
[    1.255211] usbcore: registered new interface driver usb-storage
392
[    1.260949] USB Mass Storage support registered.
393
[    1.265679] usbcore: registered new interface driver ums-alauda
394
[    1.271570] usbcore: registered new interface driver ums-cypress
395
[    1.277552] usbcore: registered new interface driver ums-datafab
396
[    1.283503] usbcore: registered new interface driver ums-freecom
397
[    1.289516] usbcore: registered new interface driver ums-isd200
398
[    1.295406] usbcore: registered new interface driver ums-jumpshot
399
[    1.301480] usbcore: registered new interface driver ums-karma
400
[    1.307309] usbcore: registered new interface driver ums-onetouch
401
[    1.313352] usbcore: registered new interface driver ums-sddr09
402
[    1.319304] usbcore: registered new interface driver ums-sddr55
403
[    1.325194] usbcore: registered new interface driver ums-usbat
404
[    1.330993] usbcore: registered new interface driver usb_ehset_test
405
[    1.337494] msm_hsic_peripheral msm_hsic_peripheral: HSIC Peripheral regs = c682a000
406
[    1.357912] msm_otg msm_otg: phy_reset: success
407
[    1.362368] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
408
[    1.367678] mbim_init: initialize 1 instances
409
[    1.372287] mbim_init: Initialized 1 ports
410
[    1.379429] rndis_qc_init: initialize rndis QC instance
411
[    1.384343] android_usb gadget: Mass Storage Function, version: 2009/09/11
412
[    1.390477] android_usb gadget: Number of LUNs=1
413
[    1.395147]  lun0: LUN: removable file: (no medium)
414
[    1.400457] android_usb gadget: android_usb ready
415
[    1.405005] msm_hsic_peripheral msm_hsic_peripheral: [ci13xxx_start] hw_ep_max = 32
416
[    1.412452] android_usb gadget: android_usb ready
417
[    1.417030] msm_hsic_peripheral msm_hsic_peripheral: CI13XXX_CONTROLLER_RESET_EVENT received
418
[    1.425423] msm_hsic_peripheral msm_hsic_peripheral: CI13XXX_CONTROLLER_UDC_STARTED_EVENT received
419
[    1.436105] android_work: android_work:usb disconnect cause suspended&sw_suspended to 0
420
[    1.443094] android_work: android_work: did not send uevent (0 0   (null))
421
[    1.450083] msm_hsic_peripheral msm_hsic_peripheral: HSIC-USB in low power mode
422
[    1.464764] couldn't get usb power supply
423
[    1.468976] diagchar initialized now
424
[    1.471814] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8018-core/pm8xxx-pwrkey/input/input0
425
[    1.485365] diag: Invalid Msg type 12 proc 2
426
[    1.505631] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
427
[    1.511948] i2c /dev entries driver
428
[    1.518480] pm8xxx_adc_probe: failed to request pa_therm vreg with error -19
429
[    1.545551] pm8xxx_tm_probe: OK
430
[    1.547932] cpuidle: using governor ladder
431
[    1.551747] cpuidle: using governor menu
432
[    1.556508] mmc0: mci-version: 18
433
[    1.560048] mmc0: bam physical base=0x12182000
434
[    1.563467] mmc0: bam virtual base=0xc6830000
435
[    1.567892] sps:BAM 0x12182000 is registered.
436
[    1.571982] mmc0: BAM device registered. bam_handle=0xc63c5000
437
[    1.578116] sps:REVISION of BAM 0xc6830000 is 0x5.
438
[    1.583335] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 130
439
[    1.589195] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012180800
440
[    1.597405] mmc0: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 136,368 dma -1 dmacrcri -1
441
[    1.606439] mmc0: 8 bit data mode disabled
442
[    1.609674] mmc0: 4 bit data mode enabled
443
[    1.613490] mmc0: polling status mode disabled
444
[    1.618098] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
445
[    1.624324] mmc0: Slot eject status = 0
446
[    1.627376] mmc0: Power save feature enable = 1
447
[    1.631893] mmc0: SPS-BAM data transfer mode available
448
[    1.637295] mmc1: mci-version: 18
449
[    1.645383] mmc1: bam physical base=0x12142000
450
[    1.654753] mmc1: bam virtual base=0xc686c000
451
[    1.660125] sps:BAM 0x12142000 is registered.
452
[    1.668243] mmc1: BAM device registered. bam_handle=0xc581b200
453
[    1.678284] sps:REVISION of BAM 0xc686c000 is 0x5.
454
[    1.692659] mmc1: Qualcomm MSM SDCC-BAM at 0x0000000012142000 irq 129
455
[    1.703067] mmc1: Qualcomm MSM SDCC-DML at 0x0000000012140800
456
[    1.712955] mmc1: No card detect facilities available
457
[    1.722295] mmc1: Qualcomm MSM SDCC-core at 0x0000000012140000 irq 135,0 dma -1 dmacrcri -1
458
[    1.734594] mmc1: 8 bit data mode disabled
459
[    1.742591] mmc1: 4 bit data mode enabled
460
[    1.750556] mmc1: polling status mode disabled
461
[    1.754616] mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
462
[    1.759682] mmc1: Slot eject status = 0
463
[    1.763497] mmc1: Power save feature enable = 1
464
[    1.767984] mmc1: SPS-BAM data transfer mode available
465
[    1.774484] logger: created 256K log 'log_main'
466
[    1.778330] logger: created 256K log 'log_events'
467
[    1.782908] logger: created 256K log 'log_radio'
468
[    1.787669] logger: created 256K log 'log_system'
469
[    1.842575] voice_allocate_shared_memory: ION memory allocation failed
470
[    1.853502] msm_pcm_probe: dev name msm-voip-dsp
471
[    1.868213] msm_pcm_probe: dev name msm-host-pcm-voice
472
[    1.873340] msm_pcm_probe: dev name msm-pcm-dsp
473
[    1.877033] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
474
[    1.883198] mdm9615_audio_init: Interface Type = -1
475
[    1.887868] ALSA device list:
476
[    1.890126]   No soundcards found.
477
[    1.893392] Netfilter messages via NETLINK v0.30.
478
[    1.898214] nf_conntrack version 0.5.0 (460 buckets, 1840 max)
479
[    1.904959] ip_set: protocol 6
480
[    1.907187] ip_tables: (C) 2000-2006 Netfilter Core Team
481
[    1.912620] TCP cubic registered
482
[    1.916954] NET: Registered protocol family 10
483
[    1.923332] ip6_tables: (C) 2000-2006 Netfilter Core Team
484
[    1.928094] NET: Registered protocol family 17
485
[    1.932153] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
486
[    1.939783] Registering SWP/SWPB emulation handler
487
[    1.947840] clock_late_init() disabled 42 unused clocks
488
[    1.955989] MSM Watchdog Initialized
489
[    1.958828] no pmic restart interrupt specified
490
[    1.964932] rtc-pm8xxx rtc-pm8xxx: setting system clock to 1970-01-01 00:34:05 UTC (2045)
491
[    1.973172] yaffs: dev is 32505870 name is "mtdblock14" rw
492
[    1.977689] yaffs: passed flags ""
493
[    1.981016] yaffs: Attempting MTD mount of 31.14,"mtdblock14"
494
[    2.039401] yaffs: block 155 is bad
495
[    2.099435] sps:BAM 0x124c2000 is registered.
496
[    2.144208] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
497
[    3.018037] yaffs: yaffs_read_super: is_checkpointed 0
498
[    3.018129] VFS: Mounted root (yaffs2 filesystem) on device 31:14.
499
[    3.023805] Freeing init memory: 168K
500
[    3.319090] sps:BAM 0x12502000 is registered.
501
[    3.325194] enable_store: android_usb: already disabled
502
[    3.334014] usmd:register_sysctl_table success.
503
[    3.337982] frmnet_bind: RmNet(0) dual Speed, IN:ep8in OUT:ep5out
504
[    3.545734] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
505
[    3.551258] android_work: android_work:usb disconnect cause suspended&sw_suspended to 0
506
[    3.564596] android_work: android_work: did not send uevent (0 0   (null))
507
[    3.619960] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
508
[    3.625911] android_work: android_work: sent uevent USB_STATE=CONNECTED
509
[    3.631893] android_work: android_work:usb disconnect cause suspended&sw_suspended to 0
510
[    3.655241] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
511
[    3.726629] android_usb gadget: high speed config #1: android_usb
512
[    3.731848] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
513
[    3.738013] msm_otg msm_otg: Avail curr from USB = 500
514
[    3.743293] diag: USB connected
515
[    3.744575] sps:REVISION of BAM 0xc68b8000 is 0x5.
516
[    3.749855] android_work: android_work: sent uevent USB_STATE=CONNECTED
517
[    3.776468] diag: USB connected
518
[    3.834976] android_work: android_work: sent uevent USB_STATE=CONFIGURED
519
[    6.987578] yaffs: dev is 32505871 name is "mtdblock15" rw
520
[    6.992034] yaffs: passed flags ""
521
[    6.995513] yaffs: Attempting MTD mount of 31.15,"mtdblock15"
522
[    8.647001] yaffs: yaffs_read_super: is_checkpointed 0
523
[    8.682405] yaffs: dev is 32505865 name is "mtdblock9" rw
524
[    8.686983] yaffs: passed flags ""
525
[    8.690187] yaffs: Attempting MTD mount of 31.9,"mtdblock9"
526
[    8.692507] yaffs: yaffs_read_super: is_checkpointed 1
527
[    8.984709] adb_open
528
[    9.579856] yaffs: dev is 32505869 name is "mtdblock13" rw
529
[    9.590325] yaffs: passed flags ""
530
[    9.597192] yaffs: Attempting MTD mount of 31.13,"mtdblock13"
531
[    9.597222] yaffs: auto selecting yaffs2
532
[    9.676789] yaffs: yaffs_read_super: is_checkpointed 1
533
[    9.955012] mbim_open: Open mbim driver
534
[    9.959957] mbim_open: Lock mbim_dev->open_excl for open
535
[    9.971738] mbim_open: USB cable not connected
536
[    9.975553] mbim_open: Exit, mbim file opened
537
[   10.053410] smd_pkt_open: DATA9_CNTL open failed -19
538
[   10.085731] smd_pkt_open: DATA12_CNTL open failed -19
539
[   10.127941] smd_pkt_open: DATA13_CNTL open failed -19
540
[   10.175919] smd_pkt_open: DATA14_CNTL open failed -19
541
[   10.805707] qsmem_poll_timer_cb:67 Modem Msg received.
542
[   10.860521] nmea: smd opened
543
[   11.087746] dtr_smd_open smd_open_ret = 0(0 SUCCESS)
544
[   11.091744] DTR SMD EVENT OPEN
545
[   11.113016] buf:dtr_low-
546
[   11.115000] enter rt5616_modinit
547
[   11.125316] enter rt5616_i2c_probe
548
[   11.135571] enter rt5616_probe
549
[   11.137982] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1300c8, irq:183
550
[   11.144239] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
551
[   11.150404] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
552
[   11.156874] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
553
[   11.178391] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1300c8, irq:183
554
[   11.184098] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
555
[   11.193010] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
556
[   11.198687] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
557
[   11.204761] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
558
[   11.211597] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
559
[   11.217610] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
560
[   11.224019] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
561
[   11.230154] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
562
[   11.236593] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
563
[   11.242697] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
564
[   11.249290] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
565
[   11.255241] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
566
[   11.261742] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
567
[   11.267938] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
568
[   11.274408] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
569
[   11.280482] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
570
[   11.286952] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
571
[   11.292995] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
572
[   11.299496] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
573
[   11.305569] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
574
[   11.312314] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
575
[   11.318663] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:183
576
[   11.327697] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
577
[   11.333801] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
578
[   11.343567] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
579
[   11.349641] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
580
[   11.356111] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
581
[   11.362185] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
582
[   11.368655] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
583
[   11.374790] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
584
[   11.381291] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
585
[   11.387456] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
586
[   11.393834] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
587
[   11.400244] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
588
[   11.407172] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
589
[   11.413215] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:183
590
[   11.420845] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
591
[   11.426552] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
592
[   11.432992] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
593
[   11.439127] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
594
[   11.445566] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
595
[   11.451854] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
596
[   11.458263] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
597
[   11.464306] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
598
[   11.470746] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
599
[   11.476911] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
600
[   11.483351] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
601
[   11.489485] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
602
[   11.495925] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
603
[   11.501999] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
604
[   11.509720] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
605
[   11.514939] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:183
606
[   11.521471] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
607
[   11.527575] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
608
[   11.534472] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
609
[   11.540088] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
610
[   11.546864] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
611
[   11.552662] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:183
612
[   11.559133] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
613
[   11.565206] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
614
[   11.571799] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
615
[   11.577872] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
616
[   11.585502] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
617
[   11.590813] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:183
618
[   11.597192] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
619
[   11.603235] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
620
[   11.610102] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
621
[   11.616023] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
622
[   11.622524] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
623
[   11.628536] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
624
[   11.634945] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
625
[   11.641049] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
626
[   11.647489] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
627
[   11.657652] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
628
[   11.663268] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
629
[   11.670318] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:183
630
[   11.676697] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
631
[   11.682191] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:183
632
[   11.688661] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
633
[   11.694674] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
634
[   11.701327] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
635
[   11.707279] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
636
[   11.713902] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
637
[   11.719945] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
638
[   11.726323] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
639
[   11.732427] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
640
[   11.738989] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
641
[   11.744971] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
642
[   11.751838] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
643
[   11.757698] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
644
[   11.764169] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
645
[   11.770242] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
646
[   11.776743] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
647
[   11.782786] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
648
[   11.789317] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
649
[   11.795360] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
650
[   11.802105] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
651
[   11.808026] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
652
[   11.814497] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
653
[   11.820570] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
654
[   11.827102] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
655
[   11.833114] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
656
[   11.839676] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
657
[   11.845688] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
658
[   11.852372] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
659
[   11.858354] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
660
[   11.866809] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
661
[   11.872028] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:183
662
[   11.878498] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
663
[   11.884541] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
664
[   11.891103] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
665
[   11.897146] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
666
[   11.903555] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
667
[   11.909720] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
668
[   11.916191] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
669
[   11.922264] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
670
[   11.928795] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
671
[   11.934839] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
672
[   11.941339] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
673
[   11.947474] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
674
[   11.953914] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
675
[   11.960476] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
676
[   11.966519] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
677
[   11.972592] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
678
[   11.979093] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
679
[   11.985228] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
680
[   11.991698] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
681
[   11.997833] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
682
[   12.004272] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
683
[   12.010407] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
684
[   12.016847] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
685
[   12.022951] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
686
[   12.029452] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
687
[   12.035525] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
688
[   12.042026] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
689
[   12.048161] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
690
[   12.054600] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
691
[   12.061254] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
692
[   12.067266] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
693
[   12.073370] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
694
[   12.079993] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
695
[   12.085945] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:183
696
[   12.092385] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
697
[   12.098550] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
698
[   12.104959] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
699
[   12.111246] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
700
[   12.117564] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
701
[   12.123638] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
702
[   12.130138] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
703
[   12.136273] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
704
[   12.142713] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
705
[   12.148878] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
706
[   12.155318] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
707
[   12.161452] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
708
[   12.167892] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
709
[   12.173996] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
710
[   12.180894] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
711
[   12.187120] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
712
[   12.193071] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
713
[   12.199206] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
714
[   12.205646] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
715
[   12.213032] msm_dai_q6_dai_sec_auxpcm_probe
716
[   12.216297] msm_dai_q6_dai_sec_auxpcm_probe
717
[   12.224629] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1300c8, irq:183
718
[   12.230276] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
719
[   12.236441] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
720
[   12.242820] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
721
[   12.248985] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
722
[   12.255424] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
723
[   12.261559] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
724
[   12.267999] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
725
[   12.274103] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
726
[   12.280604] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
727
[   12.286769] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
728
[   12.293178] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
729
[   12.299313] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
730
[   12.305753] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
731
[   12.311918] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
732
[   12.318358] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
733
[   12.324431] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
734
[   12.330932] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
735
[   12.337066] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
736
[   12.343537] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
737
[   12.349916] asoc: null-codec-dai <-> MultiMedia1 mapping ok
738
[   12.357698] asoc: null-codec-dai <-> MultiMedia2 mapping ok
739
[   12.364748] asoc: null-codec-dai <-> CS-VOICE mapping ok
740
[   12.372012] asoc: null-codec-dai <-> VoIP mapping ok
741
[   12.378666] asoc: null-codec-dai <-> SLIMBUS0_HOSTLESS mapping ok
742
[   12.386235] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
743
[   12.393285] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
744
[   12.400396] asoc: null-codec-dai <-> AUXPCM_HOSTLESS mapping ok
745
[   12.407843] asoc: null-codec-dai <-> VoLTE mapping ok
746
[   12.414375] asoc: null-codec-dai <-> DTMF_RX_HOSTLESS mapping ok
747
[   12.421822] asoc: msm-stub-tx <-> msm-dai-stub mapping ok
748
[   12.428658] asoc: msm-stub-tx <-> msm-dai-stub mapping ok
749
[   12.435464] asoc: msm-stub-rx <-> msm-dai-stub mapping ok
750
[   12.442301] asoc: msm-stub-tx <-> msm-dai-stub mapping ok
751
[   12.449107] asoc: msm-stub-rx <-> msm-dai-stub mapping ok
752
[   12.456096] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
753
[   12.463238] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
754
[   12.470441] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
755
[   12.477460] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
756
[   12.484541] asoc: rt5616-aif1 <-> msm-dai-q6.2 mapping ok
757
[   12.491530] asoc: rt5616-aif1 <-> msm-dai-q6.3 mapping ok
758
[   12.498397] asoc: msm-stub-rx <-> msm-dai-q6.12 mapping ok
759
[   12.505264] asoc: msm-stub-tx <-> msm-dai-q6.13 mapping ok
760
[   12.512223] asoc: msm-stub-rx <-> msm-dai-q6.32773 mapping ok
761
[   12.519395] asoc: msm-stub-tx <-> msm-dai-q6.32772 mapping ok
762
[   12.526598] asoc: msm-stub-tx <-> msm-dai-q6.32771 mapping ok
763
-   47.270715] buf:+QFOPEN  passwd 
764
-  104.919975] buf:+QFCLOSE 0
765
-  121.510392] buf:+QFOPEN ?
766
[  391.714603] sps:BAM is already registered: 12502000
767
[  391.718571] usb_bam_init: register bam error -17
768
[  391.723088] usb_bam usb_bam: failed to initialize usb bam
769
[  391.728887] diag: USB disconnected
770
[  391.731603] frmnet_bind: RmNet(0) dual Speed, IN:ep13in OUT:ep7out
771
[  391.737158] sps:sps_device_reset:device handle should not be 0.
772
[  391.746009] usb_bam_reset: BAM reset failed
773
[  391.755959] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
774
[  391.761269] msm_otg msm_otg: Avail curr from USB = 2
775
[  391.766213] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received
776
[  391.773264] android_work: android_work: did not send uevent (1 1   (null))
777
[  392.126384] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received
778
[  392.132305] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
779
[  392.138562] msm_otg msm_otg: Avail curr from USB = 0
780
[  392.144025] android_work: android_work:usb disconnect cause suspended&sw_suspended to 0
781
[  392.155409] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
782
[  392.198687] android_work: android_work: sent uevent USB_STATE=CONNECTED
783
[  392.204578] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
784
[  392.216145] android_work: android_work:usb disconnect cause suspended&sw_suspended to 0
785
[  392.235678] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
786
[  392.291957] android_usb gadget: high speed config #1: android_usb
787
[  392.298214] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
788
[  392.303586] msm_otg msm_otg: Avail curr from USB = 500
789
[  392.309110] diag: USB connected
790
[  392.315366] android_work: android_work: sent uevent USB_STATE=CONNECTED
791
[  392.341492] diag: USB connected
792
[  392.387700] android_work: android_work: sent uevent USB_STATE=CONFIGURED
793
[  436.916496] sps:BAM is already registered: 12502000
794
[  436.920158] usb_bam_init: register bam error -17
795
[  436.925041] usb_bam usb_bam: failed to initialize usb bam
796
[  436.930749] diag: USB disconnected
797
[  436.933221] adb_bind_config
798
[  436.935144] sps:sps_device_reset:device handle should not be 0.
799
[  436.945307] frmnet_bind: RmNet(0) dual Speed, IN:ep14in OUT:ep8out
800
[  436.950617] usb_bam_reset: BAM reset failed
801
[  436.960750] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
802
[  436.966091] msm_otg msm_otg: Avail curr from USB = 2
803
[  436.971036] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received
804
[  436.978055] android_work: android_work: did not send uevent (1 1   (null))
805
[  437.171158] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received
806
[  437.177079] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
807
[  437.183335] msm_otg msm_otg: Avail curr from USB = 0
808
[  437.188768] android_work: android_work:usb disconnect cause suspended&sw_suspended to 0
809
[  437.198168] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
810
[  437.243644] android_work: android_work: sent uevent USB_STATE=CONNECTED
811
[  437.249565] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
812
[  437.260491] android_work: android_work:usb disconnect cause suspended&sw_suspended to 0
813
[  437.279078] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
814
[  437.336578] android_usb gadget: high speed config #1: android_usb
815
[  437.342713] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
816
[  437.348115] msm_otg msm_otg: Avail curr from USB = 500
817
[  437.353670] diag: USB connected
818
[  437.354768] msm_hsusb msm_hsusb: [ep_enable] enabling a non-empty endpoint!
819
[  437.363741] android_work: android_work: sent uevent USB_STATE=CONNECTED
820
[  437.437540] android_work: android_work: sent uevent USB_STATE=CONFIGURED
821
[  728.231893] [dsp_debug.c:dsp_read] Memory Invalid or not initialized, Base = 0x0, size = 0x0
822
[  748.249992] Ramdump(ramdump_smem-modem): Read when there's no dump available!
823 1 zecke
[  754.749549] Ramdump(ramdump_modem_sw): Read when there's no dump available!
824 4 zecke
</pre>
Add picture from clipboard (Maximum size: 48.8 MB)